Evaluation of Proteferm® as a Nitrogen Supplement for Finishing Steers

Proteferm is a liquid by-product from the production of monosodium glutamate by fermentation that is 40% solids and contains 95% crude protein on a dry basis. Two trials were conducted with yearling steers to study the effects of different levels of Proteferm when added to 90% concentrate diets to replace corn and urea. Feeding Proteferm resulted in a decrease in urine pH, suggesting a metabolic acidosis that was probably caused by a negative cation–anion balance. Correcting the cation–anion imbalance resulted in an increase in feed intake and the performance of steers fed Proteferm as 1.5% of diet dry matter to be similar to the performance of control steers. Addition of sodium bicarbonate to the control diet or to the diet containing 1.5% Proteferm to produce a positive cation–anion balance did not improve performance. The results of these trials indicate that 1.5% Proteferm is the maximum that should be added to high concentrate diets fed to beef cattle without affecting performance or carcass value.

Relative Feeding Value of Wet Corn Steep Liquor When Fed to Finishing Cattle

Corn steep liquor is a liquid by-product containing condensed steep water and condensed distillers solubles from a wet corn milling plant. Finishing steers weighing nine hundred and seventy-five pounds were fed cornbased finishing diets containing 0%, 6%, or 12% corn steep liquor for 84 days. Feeding corn steep liquor did not affect performance of the steers or carcass characteristics. Based on value of feeds replaced in the diet, steep liquor had a value of $55 to $60/ton (50% dry matter) when used to replace corn and supplemental protein in a corn-based finishing diet.

Relative Feeding Value of Wet Corn Distillers Solubles as a Feed for Finishing Cattle

For 126 days, 850 lb. steers were fed diets of corn, corn silage, and ground hay containing either 0%, 4%, or 8% wet distillers solubles obtained from an Iowa dry mill ethanol plant. Addition of distillers solubles resulted in a linear decrease in feed consumption. Gains were increased 3.2% and decreased 6.4% by feeding 4% and 8% distillers solubles, respectively. Compared to the control diet, feed required per pound of gain was reduced 5% by low levels of distillers solubles and 1.5% by high levels. Feeding distillers solubles had no effect on carcass measurements. It was concluded that wet distillers solubles has value as a feed for cattle and can replace a portion of corn grain and supplemental nitrogen in a corn-based finishing diet for beef cattle. The decreased performance of steers fed the 8% level suggests that there might be a maximum amount of wet distiller solubles that can be fed to finishing cattle.

Relative Value of White Corn When Fed to Finishing Cattle and Its Effects on Color of Carcass Fat

White corn was compared with yellow corn in a 180-day finishing trial with 600 lb. Angus steers fed 90% concentrate diets. Steers fed yellow corn consumed 3.3% less feed and were 3.8% more efficient in feed utilization. Rate of gain and carcass characteristics were similar for steers fed white or yellow corn. The color of subcutaneous fat over the ribs was significantly whiter from carcasses of steers fed white corn compared with those fed yellow corn. The results of this study indicate that white corn may be used instead of barley to produce whiter fat in beef carcasses.

Long Versus Short Feeding Period for Steer Calves of Three Frame Sizes Fed High Energy Finishing Diets

An experiment was conducted using Angus cross steer calves of three frame sizes (small, medium, and large) to compare performance of two different grow/finish feeding programs. Half of the cattle in each frame size group were fed a high energy ration through the growing period, similar to calves going directly into the feedlot. The other half was fed a low energy ration, similar to a backgrounding diet, for a period prior to the finishing phase. All cattle were fed a high energy ration through the finishing period. The data showed the cattle fed the low energy growing diet experienced some compensatory gains as shown by ultrasound backfat and average daily gains coupled with intakes greater than the increases seen in the high energy treatment. Carcass data and overall performance data showed no ill effects due to the low energy growing ration.

Effect of Frame Size and Hormone Implant on Performance and Carcass Characteristics of Finishing Yearling Heifers: Returns to a Value-Based Market

Four groups of yearling heifers representing different frame sizes—small, medium, and large Angus and medium Simmental—were fed high-grain finishing diets to average Low Choice quality grade. Half the heifers were implanted with estrogen and trenbolone acetate. Backfat and ribeye area were measured by ultrasound four times during the study to assess growth of muscle and fat. Increasing frame size resulted in increased feed intake, greater rates of gain, and a trend towards reduced feed conversion. Greater returns would have been realized from each of the four groups had they been sold in a premium market based on yield grade rather than the conventional grade and yield market. Increasing frame size resulted in greater returns to the value-based market. Implants increased rate of gain and improved feed conversion but did not result in significantly greater returns to the value-based market compared with the grade and yield market. Ribeye area and backfat increased with body weight and time on feed. Increase in ribeye area was linear with time, whereas accumulation of backfat was exponential. Rate of increase in area of ribeye tended to increase and backfat tended to decrease as frame size increased. Implants increased rate of increase in ribeye area but had no effect on rate of deposition of subcutaneous fat. Equations describing growth of ribeye area and backfat for each group predicted average growth for the heifers but did not predict growth of individual heifers. Final carcass yield grade was related to initial thickness of backfat but not to initial ribeye area. These results indicate that the type of cattle selected to be fed for a premium market based on yield grade is important to the success of the program. More work is needed to develop growth equations from ultrasound measurements, but ultrasound will likely be a useful tool in selecting feeder cattle for a value-based market.

Use of Ultrasound Backfat Estimates to Form Marketing Groups Prior to Finishing for Feedlot Steers

An experiment was conducted using 95 Continental crossbred steers. The cattle were sorted by ultrasound 160 days before slaughter into a low backfat group (Low BF) and a higher backfat group (High BF). Half of the Low BF and half of the High BF were implanted whereas the other halves were not. Data from the experiment were used in two hypothetical markets. One market was a high yield beef program (HY) that did not allow the use of implants. The second market was a commodity beef program (CM) that allowed the use of implants. The cattle were priced as an unsorted group (ALL) and two sorted groups (Low BF and High BF) within the HY (non-implanted) and CM (implanted) markets. The CM program had a base price of $1.05/lb hot carcass weight (HCW) with a $0.15/lb HCW discount for quality grade (QG) Select and a $0.20/lb HCW discount for yield grade (YG) 4. The HY program used a base price of $1.07/lb HCW with premiums ($/lb HCW) paid for YG £ .9 (.15), 1.0 - 1.4 (.10), and 1.5 - 1.9 (.03). The carcasses were discounted ($/lb HCW) for YG 2.5 - 2.9 (.03), 3.0 - 3.9 (.15), and ³ 4.0 (.35). This data set provides good evidence that the end point at which to sell a group of cattle depends on the particular market. Sorting had an economic advantage over ALL in the HY Low BF and the CM High BF groups. The HY High BF cattle should have been sold sooner due to the discounts recieved for increased YG. The increased YG was directly affected by an increase in BF. Furthermore, the CM Low BF group should have been fed longer to increase the number of carcasses grading Choice.

Potential Value of Ultrasound to Sort Feeder Cattle into More Uniform Groups for Finishing and Marketing

Cattle in three experiments were scanned with ultrasound as feeders to measure ribeye area and thickness of fat cover to determine if cattle could be sorted into outcome groups with respect to carcass yield. Sorting the cattle into low fat cover or large ribeye groups resulted in improved carcass yield grades. There were no effects on carcass quality grades related to sorting of the cattle. Cattle with greater fat cover at the beginning of the feeding period were heavier, seemed to be more mature and had less muscle growth during the finishing period. There were no significant differences in gain among the groups, but cattle with more fat cover had poorer feed efficiency. Ultrasound seems to have potential to sort feeder cattle, but before it can be used in practice, growth curves need to be developed to predict final end points of individual cattle.

Integration of Pasturing Systems for Cattle Finishing Programs—A Progress Report

This progress report is an introduction to a study to evaluate the incorporation of rotational pasturing systems into cattle finishing programs. Because the first year is still in progress and the first trial is not complete, few data are available. However, there is a suggestion that feeding an ionophore to young calves on pasture may result in improved daily gains.

Integration of Pasturing Systems for Cattle Finishing Programs

A 3-year study, using 84 fall-born and 28 spring-born calves of similar genotypes, was conducted to integrate pasturing systems with drylot feeding systems. Calves were started on test following weaning in May and October. Seven treatments were imposed: 1) fall-born calves directly into feedlot; 2 and 3) fall-born calves put on pasture with or without ionophore and moved to the feedlot at the end of July; 4 and 5) fall-born calves put on pasture with or without ionophore and moved to the feedlot at the end of October; 6 and 7) spring-born calves put on pasture with or without ionophore and moved to the feedlot at the end of October. A bromegrass pasture consisting of 16 paddocks, each 1.7 acre in size, was available. Each treatment group had access to 1 paddock at a time and was rotated at approximately 3-day intervals. In the feedlot, steers were provided an 82% concentrate diet containing whole-shelled corn, ground alfalfa hay, and a protein, vitamin and mineral supplement containing ionophore and molasses. As pens of cattle reached about 1150 lb. average live weight, they were processed and carcass traits were evaluated. Pasture daily gains were highest for cattle on pasture for the longest duration (P < .03), and overall daily gains were highest for drylot cattle (P < .01) and decreased with increased time spent on pasture. Although differences among treatments existed in numerical scores for yield and quality grades (P < .05 and P < .03, respectively), all treatments provided average yield grade scores of 2 and quality grades of low Choice or higher. Use of four production costs and pricing scenarios revealed that fall-born calves placed on pasture for varying lengths of time were the most profitable (P < .04) among the treatments. Furthermore, employing a 5% price sensitivity analysis, indicated that fed-cattle selling price had great impact on profit potential and was followed in importance by feeder purchase price and corn grain price. Overall, these findings should provide significant production alternatives for some segments of the cattle feeding industry and also lend substantial credence to the concept of sustainable agriculture.

Integration of Pasturing Systems for Cattle Finishing Programs: A Progress Report

A three-year study was conducted to integrate pasturing systems with drylot feeding systems. Each year 84 fall-born and 28 spring-born calves of similar genotypes were used. Fall-born calves were started on test in May, and spring-born calves were started in October. Seven treatments were imposed: 1) fall-born calves directly into the feedlot (28 steers); 2 and 3) fall-born calves put on pasture with or without an ionophore and moved to the feedlot at the end of July (14 steers in each treatment); 4 and 5) fall-born calves put on pasture with or without an ionophore and moved to the feedlot at the end of October (14 steers in each treatment); and 6 and 7) spring-born calves put on pasture with or without an ionophore and moved to the feedlot at the end of October (14 steers in each treatment). Cattle on pasture receiving an ionophore gained faster (P=.009), but lost this advantage in drylot (P>.10). Overall, cattle started directly in the feedlot had higher gains (P<.001). Cattle receiving an ionophore on pasture had lower KPH than those that did not receive an ionophore (P<.01). Treatment influenced yield grade (P<0.001), although all treatments were YG 2. The percentage of cattle grading Prime and Choice was 75 % or higher for all treatment groups. The results show that using an ionophore improved pasture gains and that pasture treatments did not adversely influence yield and quality grades.

Integration of Pasturing Systems for Cattle Finishing Programs: A Progress Report

This progress report presents the findings of the first two years of a multi-year study. Each year 84 fall-born and 28 spring-born calves of similar genetic background were used to evaluate the incorporation of rotational pasturing systems into cattle finishing programs. The fall-born calves were started on test on May 7, 1996, and May 8, 1997, whereas the spring-born calves were started on test on October 1, 1996, and September 13, 1997. A total of seven treatments were imposed: 1) fall-born calves directly into the feedlot; 2) fall-born calves put on pasture and receiving an ionophore and moved to the feedlot on July 30, 1996, and July 29, 1997 in the first and second years, respectively; 3) fall-born calves put on pasture without an ionophore and moved to the feedlot on July 30, 1996 and July 29, 1997, in the first and second years, respectively; 4) fall-born calves put on pasture and receiving an ionophore and moved to the feedlot on October 22, 1996, and October 21, 1997, in the first and second years, respectively; 5) fall-born calves put on pasture without an ionophore and moved to the feedlot on October 22, 1996, and October 21, 1997, in the first and second years, respectively; 6) spring-born calves put on pasture and receiving an ionophore and moved to the feedlot on October 22, 1996, and October 21, 1997, in the first and second years, respectively; and 7) spring-born calves put on pasture without an ionophore and moved to the feedlot on October 22, 1996, and October 21, 1997, in the first and second years, respectively. Cattle receiving an ionophore on pasture gained more rapidly; however, cattle without access to an ionophore gained more rapidly in drylot thus negating the advantage obtained on pasture. Overall daily gains and feed conversions in drylot only, improved with increasing numbers of days fed in drylot; however, this may not be very cost effective. At similar end weights no real differences were observed in yield grades among the treatments; however, for fall-born calves the percentage grading Prime and Choice was higher for cattle fed longer in drylot.

Integration of Pasturing Systems for Cattle Finishing Programs: A Progress Report

In this study, 84 fall-born and 28 spring-born calves of similar genetic background were used to evaluate the incorporation of rotational pasturing systems into cattle finishing programs. Because the second-year trial is not complete, this report will include only the first year of the five-year study. Seven treatments were imposed: 1) fall-born calves put directly into the feedlot on May 7, 1996; 2) fall-born calves put on pasture and receiving an ionophore and moved to the feedlot on July 30, 3) fall born calves put on pasture on May 7 and not receiving an ionophore and moved to the feedlot on July 30; 4) fall-born calves put on pasture on May 7 and receiving an ionophore and moved to the feedlot on October 22; 5) fall-born calves put on pasture on May 7 and not receiving an ionophore and moved to the feedlot on October 22; 6) spring-born calves put on pasture on October 1 and receiving an ionophore and moved to the feedlot on October 22; and 7) spring-born calves put on pasture on October 1 and not receiving an ionophore and moved to feedlot on October 22. Performance data showed that cattle on pasture receiving an ionophore had higher gains than those not receiving an ionophore on pasture. This trend was reversed in the feedlot period. Yield grades were not greatly influenced by treatment, although quality grades tended to be higher for older cattle and those cattle that were in drylot for a longer period of time.

An Evaluation of Effective Fiber in Beef Feedlot Finishing Diets

A study was designed to collect a database of Iowa feedlot rations for determination of effective neutral detergent fiber (NDF) in complete diets from fiber analysis and particle size determination of individual feed ingredients and compare this with particle size determination of mixed wet rations. Seventy-one beef finishing total mixed rations were collected by ISU Extension Beef Field Specialists across Iowa. Producers were asked to complete a form assessing the acidosis risk associated with each ration. The average NDF of these diets was 25.9%. Of the total mixed rations 1.33 % remained in the top tray (>.75 in.), 47.27 % remained in the middle tray (>.31 in.), and 50.88 % was smaller than the .31 in screen. The effective NDF (eNDF) calculated from the eNDF of the ingredients averaged 10.56%. Estimated eNDF from total diet NDF and the percentage of the total diet in the top and middle trays averaged 12.47%. The calculated eNDF from non-grain sources alone averaged 3.6%. The percentage of digestive deads was weakly related to the percentage of the ration in the bottom tray (r=.19), the percentage in the top tray (r=- .46) and the effective NDF of the ration (r=-.23). The percentage of bloat was related to the total NDF of the diet (r=.28) and the effective fiber from non-grain sources (r=-.23). The number of off-feed incidences was related to the dry matter of the ration (r=.38), the apparent eNDF (r=-.28) and the percentage of ration in the bottom tray (r=.24). This study confirms that there is some relationship between effective NDF of the diet, effective NDF from non-grain sources or diet particle size; and acidosis indicators. These relationships are weak, however, indicating that other factors such as feedbunk management, feed processing, feed presentation and feed mixing likely also play a role in the incidence of acidosis in feedlot cattle.

Evaluation of Low Test Weight Corn for Finishing Lambs

The floods of 1993 caused the corn crop to be low in test weight. The following study was conducted to determine the relative feeding value of low test weight corn. The ability to feed this discounted corn to lambs could be a means of adding extra value to the discounted crop and lower the cost of lamb gain. Performance parameters indicated that low test weight corn was of equal value to normal test weight corn.