Process Gas Infiltration in Inconel 718 Samples during SLM Processing

Argon infiltration is a well-known problem of hot isostatic pressed components. Thus, the argon content is one quality attribute which is measured after a hot isostatic pressing (HIP) process. Since the Selective Laser Melting (SLM) process takes place under an inert argon atmosphere; it is imaginable that argon is entrapped in the component after SLM processing. Despite using optimized process parameters, defects like pores and shrink holes cannot be completely avoided. Especially, pores could be filled with process gas during the building process. Argon filled pores would clearly affect the mechanical properties. The present paper takes a closer look at the porosity in Inconel 718 samples, which were generated by means of SLM. Furthermore, the argon content of the powder feedstock, of samples made by means of SLM, of samples which were hot isostatic pressed after the SLM process, and of conventionally manufactured samples were measured and compared. The results showed an increased argon content in the Inconel 718 samples after SLM processing compared to conventional manufactured samples.

The Impact of Western Social Workers in Romania - a Fine Line between Empowerment and Disempowerment

Ideally the social work profession promotes social change, problem solving in human relationships and the empowerment and liberation of people to enhance their well-being (IFSW 2004). The social work practice, however, often proves to be different. Social workers are always in the danger to make decisions for their clients or define problems according to their own interpretation and world view. In quite a number of cases, the consequence of such a social work practice is that the clients feel disempowered rather than empowered. This dilemma is multiplying when western social workers get involved in developing countries. The potential that intervention, with the intention to empower and liberate the people, turns into disempowerment is tremendously higher because of the differences in tradition, culture and society, on the one side and the power imbalance between the ‘West’ and the ‘Rest’ on the other side. Especially in developing countries, where the vast majority of people live in poverty, many Western social workers come with a lot of sympathy and the idea to help the poor and to change the world. An example is Romania. After the collapse of communism in 1989, Romania was an economically, politically and socially devastated country. The pictures of the orphanages shocked the western world. As a result many Non-Governmental Organisations (NGOs), churches and individuals were bringing humanitarian goods to Romania in order to alleviate the misery of the Romanian people and especially the children. Since then, important changes in all areas of life have occurred, mostly with foreign financial aid and support. At the political level, democratic institutions were established, a liberal market economy was launched and laws were adapted to western standards regarding the accession into the European Union and the NATO. The western world has left its marks also at the grassroots level in form of NGOs or social service agencies established through western grants and individuals. Above and beyond, the presence of western goods and investment in Romania is omnipresent. This reflects a newly-gained freedom and prosperity - Romania profits certainly from these changes. But this is only one side of the medal, as the effect of westernisation contradicts with the Romanian reality and overruns many deep-rooted traditions, thus the majority of people. Moreover, only a small percentage of the population has access to this western world. Western concepts, procedures or interpretations are often highly differing from the Romanian tradition, history and culture. Nevertheless, western ideas seem to dominate the transition in many areas of daily life in Romania. A closer look reveals that many changes take place due to pressure of western governments and are conditioned to financial support. The dialectic relationship between the need for foreign aid and the implementation becomes very obvious in Romania and often leads, despite the substantial benefits, to unpredictable and rather negative side-effects, at a political, social, cultural, ecological and/or economic level. This reality is a huge dilemma for all those involved, as there is a fine line between empowering and disempowering action. It is beyond the scope of this journal to discuss the dilemma posed by Western involvement at all levels; therefore this article focuses on the impact of Western social workers in Romania. The first part consists of a short introduction to social work in Romania, followed by the discussion about the dilemma posed by the structure of project of international social work and the organisation of private social service agencies. Thirdly the experiences of Romanian staff with Western social workers are presented and then discussed with regard to turning disempowering tendencies of Western social workers into empowerment.

A Cooperative and Adaptive Variable Neighborhood Search for the Multi Depot Vehicle Routing Problem with Time Windows

In this paper we propose two cooperation schemes to compose new parallel variants of the Variable Neighborhood Search (VNS). On the one hand, a coarse-grained cooperation scheme is introduced which is well suited for being enhanced with a solution warehouse to store and manage the so far best found solutions and a self-adapting mechanism for the most important search parameters. This makes an a priori parameter tuning obsolete. On the other hand, a fine-grained scheme was designed to reproduce the successful properties of the sequential VNS. In combination with the use of parallel exploration threads all of the best solutions and 11 out of 20 new best solutions for the Multi Depot Vehicle Routing Problem with Time Windows were found.

A Column-Generation Approach for a Short-Term Production Planning Problem in Closed-Loop Supply Chains

We present a new model formulation for a multi-product lot-sizing problem with product returns and remanufacturing subject to a capacity constraint. The given external demand of the products has to be satisfied by remanufactured or newly produced goods. The objective is to determine a feasible production plan, which minimizes production, holding, and setup costs. As the LP relaxation of a model formulation based on the well-known CLSP leads to very poor lower bounds, we propose a column-generation approach to determine tighter bounds. The lower bound obtained by column generation can be easily transferred into a feasible solution by a truncated branch-and-bound approach using CPLEX. The results of an extensive numerical study show the high solution quality of the proposed solution approach.

Exact Solutions to the Symmetric and Asymmetric Vehicle Routing Problem with Simultaneous Delivery and Pick-Up

In reverse logistics networks, products (e.g., bottles or containers) have to be transported from a depot to customer locations and, after use, from customer locations back to the depot. In order to operate economically beneficial, companies prefer a simultaneous delivery and pick-up service. The resulting Vehicle Routing Problem with Simultaneous Delivery and Pick-up (VRPSDP) is an operational problem, which has to be solved daily by many companies. We present two mixed-integer linear model formulations for the VRPSDP, namely a vehicle-flow and a commodity-flow model. In order to strengthen the models, domain-reducing preprocessing techniques, and effective cutting planes are outlined. Symmetric benchmark instances known from the literature as well as new asymmetric instances derived from real-world problems are solved to optimality using CPLEX 12.1.