Effect of Manganese and Arsenic upon Current Efficiency in the Deposition of Zinc from Zinc Sulphate Solution

Throughout the entire experiment the electrolysis were conducted in an eight-hundred cubic centimeter beaker. An excellent circulation of the solution was assured by means of an electric stirrer, vigorous gas evolution from the anodes, and by means of a regulated feed-discharge system. By means of this balance, solution of the same impurity concentration as that of the electrolyte was fed in the cell just as fast as the discharge was syphoned out.

The Electrodeposition of Manganese from Certain Aqueous Solutions

Careful examination of the literature available shows that the electrodeposition of manganese from various aqueous solutions has not been attempted to any great extent. The best method for the electrodeposition of pure manganese consists in the electrolysis of a solution con­taining manganous and ammonium sulphates.

The Effects of Zinc Sulphate, Manganese Sulphate, and Iron Sulphate on the Lead Storage Cell.

The lead storage battery as it is used today is made up of the pasted type plates of lead dioxide, the anode, and sponge lead, the cathode, and wooden or hard rubber separators, which serve to insulate these from one another. In manufacturing these, it is desirable to keep them free from impurities.

The Extraction of Manganese from Manganese Flue Dust.

It is estimated that 90 to 95% of the world’s consumption of manganese is used in the steel industry in the form of either ferromanganese or spiegeleisen. The remainder is used in the form of either salts or oxides, chloride, dioxide and monoxide.

The Presence of Rhenium in Montana Manganese Ores.

Rhenium properties offer many interesting possibilities, therefore any ores containing rhenium would be of considerable value. Its close relationship to manganese in the periodic table led to the belief that manganese ores would be an excellent place to search for the metal. Investigation of the literature of rhenium revealed that no ore was known to contain more than 0.001 per cent of rhenium.

The Electrodeposition of Manganese from Certain Aqueous Solutions.

Manganese has been successfully electrodeposited from aqueous solutions in past years by several work­ers in electrochemical and electrometallurgical fields. The present work was concerned, primarily, with investigation of electrodeposition from solutions which are commercially obtainable from the hydrometallurgical or pyrometallurgical treatment of the low grade mangan­ese deposits of this country.

The Age Hardening of Copper with Manganese Silicide.

The increase in hardness is attributed to the manganese silicide being precipitated from solid solution and deposited between crystal planes. The subsequent softening which occurs on prolonging the period of reheating is believed to be due to an agglomeration of the dispersed hardening agent.

Electrolytic Manganese

The production of metallic manganese by electrolysis is of potential value for the recovery of this strategic metal from domestic deposits. These deposits are largely unsuitable for the production of ferromanganese, but they are amenable to low-cost leaching processes.

Relationships of Manganese Minerals in the Butte District

The use of manganese in the steel industry as a deoxidizing and desulfidizing agent makes it a necessity in modern industry, while the various alloy steels using manganese for the quality of toughness are also indispensable. Manganese is also used in the manufacture of such various articles as battery cells, paints and glass.

A Study of the Concentration of a Low-Grade Manganese Ore from the Ennis District

The purpose of the investigation was to determine the most effective means of concentrating the manganese in the ore. The study was that of identification of the minerals present. This showed the presence of oxides of manganese and iron, and carbonates of calcium and manganese. Methods of investigation were planned to determined whether the ore could be concentrated effectively by gravity concentration methods. ­

An Experimental Investigation of the Age Hardening of Copper with Manganese Silicide

The subject of the thesis was based upon the theory of precipitation or age hardening of the copper by the compound formed by the Manganese and silicon present in the ternary Cu-Mn-Si alloy. The effect of the heat treat­ment to such an alloy was to be studied and the best aging time and temperature was to be determined.

Measurements of the Magnetic Permeabilities of the Iron-Manganese Alloy System Prepared by the Methods of Powder Metallurgy

Powder metallurgy is a branch of metallurgy which produces metallic compacts in their final forms by means of pressure and heat-treatment from the pow­ders. The products of powder metallurgy are being used in our daily lives quite often. For example, the tungsten wires in the electric bulbs to the silver-tin fillings of our teeth.

The Electrowinning of Manganese from Rhodochrosite

Manganese is commonly known to be a metal of great strategic importance. It is essential in the production of all steels, first as a scavenger to remove oxygen and sulfur, and second as an alloying element in wear-resis­tant steels.

The Determination of Aluminum in the Presence of Manganese and Iron by the Use of a Mercury Cathode

Since 1880, when Wolcott Gibbs made the suggestion that mercury could be used as a cathode in gravimetric electroanalysis, many articles have appeared in literature either criticizing the method or citing successful results which have been obtained by it.

The Electrodeposition of Iron-Manganese Alloys

Various electrolytes were experimented with in an attempt to deposit an iron-manganese alloy. An Alloy was obtained from a solution containing ferrous ammonium sulfate, manganous sulfate, and ammonium sulfate. Further experimentation was done in an effort to determine the optimum conditions of deposition and the highest manganese alloy which could be produced.