Roasting and Leaching Bulk Copper-Zinc Sulfide Concentrates with the Subsequent Recovery of the Metals by Electrolysis

The aim of this research was to investigate the possibilities of roasting and leaching a bulk copper-zinc sulfide concentrate, and the subsequent separation of the metals from the leach solution by electro­lytic deposition.

The Recovery of Zinc from Butte Mine Waters

Very little work has been done towards the recovery of zinc from mine water because the zinc content of the water is generally low. As different from copper, which can very easily be replaced by iron in any of its solutions, zinc is very high up in the electro-chemical series and so the few metals above zinc, most of which are rare and hence expensive, cannot be used to replace zinc from its solution.

An Investigation into the Recovery of Indium from Fume Residue

Several months were required to produce a single gram of indium. Consequently, the industrial history of the metal is extremely short. In view of the unique properties that indium has demonstrated in this short period, it is probable that indium is still in its early stage of development. However, the commer­cial applications of the metal are well established and indium is now produced on a commercial scale. It is obtainable as the metal or in solution for electroplat­ing.

The Recovery of Copper in Sulphide Ores by Roasting, Leaching, and Electrolysis

Sulphide ores of copper are insoluble in dilute sulphuric acid leaching solutions, but a very high extraction can be obtained if the copper ore is in the oxidized condition. The problem is to convert the sulphide into the oxide form. This can be done by giving the sulphide ore an oxidizing-sulphatizing roast. Copper sulphate is soluble in water, so acid will be saved in the leaching process if copper sulphate is present. The iron in the copper sulphide ores is present as pyrite, or in combinations as bornite, or chalcopyrite.

Ammoniacal Sulphate Leach of Ananconda Zinc Calcine Recovery of the Zinc by Electrolysis.

Zinc is produced from ores by two general methods, distillation and electrolysis. The general principles involved in the electrolytic zinc process of today were known as far back as 1880. Difficulties encountered in purifying the solution for electrolysis and lack of suitable mechanical apparatus were the main reasons that such a long time elapsed before the process was used to produce zinc in commercial quantities.

Electrolytic Recovery of Copper and Zinc from Brasses

Reclaimed metals, or secondary metals, are becoming of great im­portance in the metal industries of the world. Secondary metals are an important factor in production. The increase in the secondary production of copper is due to many factors. One of these may be its permenance, that is, the metal does not corrode very readily. Another reason for increase in production is the high price paid for it.

Electrolytic Recovery of Copper and Zinc from Brass

The purpose of this research was to continue the work of Thomas Parker, who worked on the recovery of copper and zinc from brass during the school year l934 - 1935. Since there is such a wide variety of brasses made with usually a third alloying constituent, remelt­ed scrap is suitable only for castings of wide tolerance in specifications.

Alkali Leaching of Antimony Sulphide and Electrolytic Recovery of Antimony from the Resulting Leach Solution

It is the purpose of this investigation to obtain some insight into optimum conditions for leaching Stib­nite with sodium hydroxide solution and also to steady the factors affecting the electrolysis of the resulting solution.

Electrolytic Recovery of Copper and Zinc from Brass.

The reclamation of metals from scrap is becoming increasingly important in the metallurgical industry. Copper, because it does not corrode readily and is electronegative to most common metals, is peculiarly adapted to reclamation.

The Electrolytic Recovery of Copper and Zinc from Scrap Brass with Special Reference to Lead-Bearing Brass.

Several methods have been investigated, with some success, for treating scrap brass to recover copper and zinc, either as pure metals or as salts of the metals. One of the more promising of these methods is electrolysis in sulfate solution for the recovery of pure copper and zinc.

An Attempt to Increase the Permeability and Porosity of the Cut Bank Oil Sand By Treatment with Various Reagents

The purpose of this investigation was to attempt to find some means of increasing the effective porosity and permeabil­ity of the producing sands of the Cut Bank Oil Field, with the hope that thereby the ultimate recovery of petroleum from this field may be increased. Although the percentage increase in production thus effected would undoubtedly be small, it would represent a substantial volume of petroleum in view of the great quantity of oil and gas present in this field.

Operation Characteristics of the Series System for Electrolytic Refining of Copper

In the copper electrolytic refining operation, two main objectives are desired: the first is the production of a metal of desired chemical composition and physical characteristics, and the second is the recovery of the valuable by-products.