Oil and Gas Production Methods in Montana

Montana's oil and gas industries aggregate a gross income of over 12,000,000 annually to the state. Oil and gas fields have been thoroughly discussed in liter­ature as to geology, location, production and future possibilities. The specific object of this report has been to compile a comprehensive study of the production methods as they occur.

Montana Oil Fields

Since the discovery of oil in Montana in1916, the petroleum industry has advanced to a point where over 5,000,000 barrels of oil worthover $6,500,000 has been produced in each of the three past years (1936, 1937, and 1938).

Gas Analysis by Absorption

There is practically only one method of gas analysis. This was worked out many years ago by Bunsen, Hempel, and Winkler and consists in the successive absorption with different chemicals of the various constituents of the gas. The only improvement to this method is the oxidation and combustion of different components of a mixture followed by absorption.

Permeability and Porosity Studies of the Cut Bank Oil Sand

In studying the Cut Bank field and its numerous wells, it is found that dry holes are surrounded by producing wells, and also that the field as a whole is very irregular; water, oil, and gas zones in many cases following no definite pattern. In some instances, this phenomenon may be due to the lensing and thinning of the producing sands, but it is evident that this is not the only factor. There­fore, the controlling factors must be porosity and permeability.

An Attempt to Increase the Permeability and Porosity of the Cut Bank Oil Sand By Treatment with Various Reagents

The purpose of this investigation was to attempt to find some means of increasing the effective porosity and permeabil­ity of the producing sands of the Cut Bank Oil Field, with the hope that thereby the ultimate recovery of petroleum from this field may be increased. Although the percentage increase in production thus effected would undoubtedly be small, it would represent a substantial volume of petroleum in view of the great quantity of oil and gas present in this field.

Subsurface to Surface Correlation of the Tensleep Sandstone in the West Flank of the Pryor Mountains in Carbon County, Montana

The Pennsylvanian Tensleep Sandstone is an eolian and nearshore marine/sabka quartz arenite unit with prominent outcrops along the western Pryor/Bighorn Mountain front east of Red Lodge, MT. Regionally, the formation represents one of the largest ergs in the global geologic record. High permeability makes it an important oil and gas reservoir and aquifer in south central Montana and throughout much of Wyoming. The Tensleep Sandstone’s high percentage of quartz content and grain roundness, due to its eolian origin, makes it a prospective source for natural proppant sand. Three continuous 4-inch cores were obtained during a cooperative project between Montana Tech and industry partners. Using stratigraphic sections, cores, thin sections, and x-ray fluorescence (XRF) analysis, the usefulness and economic feasibility of the Tensleep Sandstone as a minable hydraulic fracture proppant was explored. Usefulness depends on cementation, grain shape, grain size, and depth from surface of the prospective zone. Grain shape and size were determined by thin sections, sieving, and stereomicroscope analysis. Analysis of 20 disaggregated sand samples has shown that as much as 30 percent of the grain sizes fall between 30-50 mesh (medium- to finegrained sand size) and about 45 percent of the grain sizes fall between 70–140 mesh (very fine-grained sand to coarse silt), grain sizes appropriate for some hydraulic fracture operations. Core descriptions and XRF data display the distribution of lithology and cementation. Core descriptions and XRF data display the distribution of lithology and cementation. Elemental (XRF) analyses help to delineate more pure quartz sands from those with grain fractions reflecting fine-grained clastic and evaporitic inputs. The core and nearby stratigraphic sections are used to quantify the amount of overburden and the 3 amount of resource in the area. Initial results show favorable crush strength and useable grain size and shape.

The Other Side of the Doors: Butte & Beyond -- Congressman Pat Williams “In the Crucible of Change”

Pat Williams emerged from the Mining City of Butte, Montana with a sense of grassroots, people-oriented politics. His inherent belief in the power of ordinary citizens carried him through the Montana Legislature and into Congress for a record-setting period. The accomplishments of his long career partially obscured his innate progressive and populist instinct that is reflective of the period of “in the Crucible of Change.” This film addresses Pat’s early years when his progressive instincts and activities resulted in pushback from the giant Anaconda Company which had held Montana hostage for 75 years. Pat is joined for part of the film by former campaign staffer, and now prominent media consultant, Michael Fenenbock for reflections on Pat’s 1978 “Door-to-Door to Congress” campaign, which demonstrated the power of his belief in the people on the other side of the doors. Pat Williams (b. 1937) rose from teaching grade school in his hometown of Butte, MT, to serving for the longest number of consecutive terms (9 terms, 18 years) in the US House of Representatives of anyone in Montana history. Pat was a member of the National Guard and attended UM in Missoula and William Jewel College, graduating from the University of Denver. Pat also served in the Montana legislature for 2 terms (1966 & 1968 elections). In 1969. Pat helped his legislative seat-mate John Melcher get elected as Montana’s Eastern District Congressman in the Special Election that June. Pat went to Washington DC as Melcher’s Executive Assistant. Upon returning to Montana, Pat headed up the Montana offices of the innovative Mountain Plains Family Education Program. In 1974, Pat ran unsuccessfully for Montana’s Western District Congressional seat in a three-way race with former Congressman Arnold Olsen and state Legislator Max Baucus. After the drafting and passage of the 1972 Montana Constitution, Pat was named a member of Montana’s first-ever Reapportionment Commission. In 1978 he successfully ran for Congress, conducting a massive grass-roots door-to-door campaign of 1½ years, reaching 50,000 doors. In a hotly contested 6-way Democratic primary, Pat won going away and also handily won the general election. Pat served in Congress from January, 1979 until January of 1997, 14 years representing the Western District and 4 years representing the entire state. Upon his retirement from Congress, in 1997 Williams returned to Montana where has been an instructor at the University of Montana and Senior Fellow and Regional Policy Associate at the Center for the Rocky Mountain West. He is a former member of the Montana Board of Regents and serves on a number of national education-related boards. In Congress Pat was a Deputy Whip of the U.S. House of Representatives and sat on committees on: Budget, Natural Resources, Education and Labor, and Agriculture. Pat’s leadership helped pass trailblazing legislation to assist hard-working middle-class families and ensure opportunities for every child. Pat’s fingerprints are on many pieces of important legislation, including the College Middle Income Assistance Act, the Family and Medical Leave Act, the Toddlers and Childhood Disability Act, the Library Services and Construction Act, and the Museum Services Act. Pat successfully sponsored the Lee Metcalf Wilderness Area and the Rattlesnake Wilderness area, helped save the Bob Marshall Wilderness from oil and gas exploration, and helped ban geothermal energy drilling near the borders of Yellowstone National Park. As Chairman of The Post-Secondary Education Committee, he protected the National Endowment for the Arts from elimination, a remarkable undertaking during a very trying time for the Agency. Pat worked tirelessly with Tribal College Leaders to build Montana’s seven Tribal Colleges. He was also responsible for the legislation that created The American Conservation Corps, which became the Corporation for National Service, giving thousands of America’s young people a chance to serve their country and pursue higher education. Pat lives in Missoula with his wife Carol Griffith Williams, former Montana Senate Majority Leader. They have three children and five grandchildren.

Water Quality Issues in the Williston Basin, Montana and North Dakota

The Williston basin has been producing oil and gas since the 1950s, but production has increased recently due to use of hydraulic fracturing and horizontal drilling technologies to extract oil and gas from the Bakken and Three Forks Formations. As concern about effects of energy production on surface-water and groundwater quality increases, the characterization of current water-quality conditions is highly important to the scientific community, resource managers, industry, and general public.

Mercury in Gas Operations - Occupational Health Risk Assessment

The project goal was to determine plant operations and maintenance worker’s level of exposure to mercury during routine and non-routine (i.e. turnarounds and inspections) maintenance events in eight gas processing plants. The project team prepared sampling and analysis plans designed to each plant’s process design and scheduled maintenance events. Occupational exposure sampling and monitoring efforts were focused on the measurement of mercury vapor concentration in worker breathing zone air during specific maintenance events including: pipe scrapping, process filter replacement, and process vessel inspection. Similar exposure groups were identified and worker breathing zone and ambient air samples were collected and analyzed for total mercury. Occupational exposure measurement techniques included portable field monitoring instruments, standard passive and active monitoring methods and an emerging passive absorption technology. Process sampling campaigns were focused on inlet gas streams, mercury removal unit outlets, treated gas, acid gas and sales gas. The results were used to identify process areas with increased potential for mercury exposure during maintenance events. Sampling methods used for the determination of total mercury in gas phase streams were based on the USEPA Methods 30B and EPA 1631 and EPA 1669. The results of four six-week long sampling campaigns have been evaluated and some conclusions and recommendations have been made. The author’s role in this project included the direction of all field phases of the project and the development and implementation of the sampling strategy. Additionally, the author participated in the development and implementation of the Quality Assurance Project Plan, Data Quality Objectives, and Similar Exposure Groups identification. All field generated data was reviewed by the author along with laboratory reports in order to generate conclusions and recommendations.