A Study of the Differential Seperation of Galena and Sphalerite

The smelting of complex lead ores is a difficult operation, especially when they contain considerable amounts of iron and zinc. When these ores are smelted, all of the zinc, which is valuable and well worth recovering, goes into the slag. With the advent of the flotation processes, and the ability of these processes to concentrate the lead and zinc minerals into separate products, the smelting of complex lead ores was to a great extent simplified.

A Metallurgical Study of Gold Ores

Gold is widely distributed in the earth's crust in small quantities. Gold is found in nature in two forms; the element itself and the compound gold telluride. In all cases, silver in some proportion is an alloying constituent.

The Recovery of Copper in Sulphide Ores by Roasting, Leaching, and Electrolysis

Sulphide ores of copper are insoluble in dilute sulphuric acid leaching solutions, but a very high extraction can be obtained if the copper ore is in the oxidized condition. The problem is to convert the sulphide into the oxide form. This can be done by giving the sulphide ore an oxidizing-sulphatizing roast. Copper sulphate is soluble in water, so acid will be saved in the leaching process if copper sulphate is present. The iron in the copper sulphide ores is present as pyrite, or in combinations as bornite, or chalcopyrite.

Alloys of Lead and Tellurium

Prior to the last few years little practical use was made of the element tellurium, which is obtained from gold and silver tellurides and from the slimes of electro­lytic copper refineries. Lately, however, more study has been made of its properties when alloyed with other metals. It was the purpose of this thesis to study the effects of the addition of tellurium to lead, particularly in small amounts.

Supergene Enrichment of Silver Ores with Special Reference to those from Neihart, Montana.

In the development of a technique it was necessary to learn the fundamentals of ore microscopy as applied to the various minerals of silver, which included the use of reflected polarized light, etch reactions, micro­chemical analysis, and sight recognition of mineral. In addition it was necessary to become familiar with the accepted criteria of sequence, replacement, and other textural phenomena.

Microscopic Study of Montana Silver Ores.

A microscopic investigation of the Montana silver minerals was conducted. This study consisted mainly of identifying the silver and silver-bearing minerals and of determining their paragenetic rela­tionships. The increasing amount of research in which the reflecting microscope is employed is evidence of the great value of this method of approach in the solution of problems of paragenesis of the opaque minerals.

The Effects of Zinc Sulphate, Manganese Sulphate, and Iron Sulphate on the Lead Storage Cell.

The lead storage battery as it is used today is made up of the pasted type plates of lead dioxide, the anode, and sponge lead, the cathode, and wooden or hard rubber separators, which serve to insulate these from one another. In manufacturing these, it is desirable to keep them free from impurities.

A Study and Application of the Process of Supergene Enrichment of Silver Ores.

In many deposits of silver ores the grade of the ore de­creases considerably a few hundred feet below the surface. It is believed that in many cases the better ores owe their richness in part to the process of sulphide enrichment. It is recognized, however, that many rich silver ores are hypogene deposits that have been affected very little, if any, by processes of enrichment.

The Effects of Lime on the Amalgamation of Gold.

An amalgam is an alloy of mercury with other metals, and amalgamation is the art of making or forming amalgams. In metallurgical language the word is limited to the means adopted for the recovery of gold and silver from their ores by the use of mercury.

The Inhibitory Effects of Carbonaceous Materials on the Cyaniding of Gold Ores.

Carbon and carbonaceous material have been known to have a deleterious effect upon the cyanidation of gold and silver ores since the very beginning of the process. Organic matter is a common source of impu­rities in cyanide solution, its reducing effect being notorious.

The Presence of Rhenium in Montana Manganese Ores.

Rhenium properties offer many interesting possibilities, therefore any ores containing rhenium would be of considerable value. Its close relationship to manganese in the periodic table led to the belief that manganese ores would be an excellent place to search for the metal. Investigation of the literature of rhenium revealed that no ore was known to contain more than 0.001 per cent of rhenium.

A Rapid Determination of Small Amounts of Lead in Zinc

This investigation, carried on in the metallur­gical laboratories at the Montana School of Mines, was undertaken with the desire to work out a rapid method for the estimation, or the determination, of the amount of lead in zinc.

Electrolysis of Molten Mixtures of Galena and Lead Chloride.

Electrolysis of molten mixtures of lead chloride and galena was carried out under various conditions of temperature, time, composition, and current densities; without a diaphram, and with various diaphrams. Continuous runs, with necessary additions of lead sulfide and lead chloride to maintain a melt of the proper composition, were attempted on a small scale.

The Electrolytic Recovery of Copper and Zinc from Scrap Brass with Special Reference to Lead-Bearing Brass.

Several methods have been investigated, with some success, for treating scrap brass to recover copper and zinc, either as pure metals or as salts of the metals. One of the more promising of these methods is electrolysis in sulfate solution for the recovery of pure copper and zinc.

The Electroformation of Lithium-Lead Alloys from Molten Electrolytes

An attempt was made to make lead-lithium alloys by electrodeposition of lithium using a molten bath and a molten lead cathode.The variables taken into consideration were: composition of the melt, temperature of the melt, and current density. The purpose of changing these factors was to determine what effect each had on the current efficiency.