Geology of Iron Deposits at Princeton Montana and Economic Aspects of Iron Ore in Montana

The purpose of this paper is to introduce to the reader, an iron deposit in the Princeton district, about 19 miles northeast by highway from Philipsburg, Montana. Heretofore there has been no written literature on this deposit. It is also intended to investigate the economic possibilities of iron ore in general in the State of Montana.

Induction Furnace Smelting of Montana Chromite

In 1939 the total world production of crude chromite was approximately 1,167,000 metric tons; of which the United States produced only 3,672 metric tons and imported over 317,500 metric tons. Imports came mostly from the Philippine Islands, Cuba, South Africa, and Rhodesia.

An Active Learning Module for an Introduction to Software Engineering Course

Many schools do not begin to introduce college students to software engineering until they have had at least one semester of programming. Since software engineering is a large, complex, and abstract subject it is difficult to construct active learning exercises that build on the students’ elementary knowledge of programming and still teach basic software engineering principles. It is also the case that beginning students typically know how to construct small programs, but they have little experience with the techniques necessary to produce reliable and long-term maintainable modules. I have addressed these two concerns by defining a local standard (Montana Tech Method (MTM) Software Development Standard for Small Modules Template) that step-by-step directs students toward the construction of highly reliable small modules using well known, best-practices software engineering techniques. “Small module” is here defined as a coherent development task that can be unit tested, and can be car ried out by a single (or a pair of) software engineer(s) in at most a few weeks. The standard describes the process to be used and also provides a template for the top-level documentation. The instructional module’s sequence of mini-lectures and exercises associated with the use of this (and other) local standards are used throughout the course, which perforce covers more abstract software engineering material using traditional reading and writing assignments. The sequence of mini-lectures and hands-on assignments (many of which are done in small groups) constitutes an instructional module that can be used in any similar software engineering course.

An Investigation of the Ores of the Big Seven Mine, Neihart, Montana

During the course of this investigation of the ores of the Big Seven mine, Neihart, Montana, the writer has attempted, through a mi­croscopic study of polished sections, to ascertain the hypogene or supergene character of the ore minerals present in the ore suite.

Chromite Deposits Near Red Lodge and Silver Star, Montana

The Red Lodge and Silver Star chromite deposits of Montana have stimulated much interest during periods of war. The Red Lodge deposit is 25 miles southwest of Red Lodge which is also the nearest railroad point. Several workings are scattered throughout the area, exposing lense-like ore bodies averaging 33% chrome oxide. Silver Star is a much smaller deposit 5 miles west of Silver Star, Montana, which is its nearest rail­road point. Lenses of chromite are exposed by pits and trench­es, which average approximately 36% chromic oxide.

Testing and Concentration of a Low Grade Gold Ore from Marysville, Montana

The purpose of this thesis was to investigate and attempt to concentrate low grade cyanided tailings rejected from the old Montana Mining and milling Company's mill situated 4 miles below the town of Marysville, Montana.

Shaping a Bright Future for Montana Tech: Developing State, National and Global Leaders in Resource Sectors

Presentation by Leigh W. Freeman. Rachel Carson's book Silent Spring published in 1962 marked the birth of concepts leading to the development of mineral resources with a balance of economic, environmental and social imperatives. Montana plays a special role in this story. It is 'the last best place.' As such it can serve as a bell-weather state for Carson's revelations. Consider: Butte as a poster child for legacy problems resulting from resource development under solely economic imperatives; and Montana as a first-adapter in 1971 of state environmental laws based on imperatives heralded with Silent Spring. What better place is there to educate and develop leaders and incubate the future of resource development in global sustainability?

Coal in Montana

Coal was first mined in Montana in the year 1880. For the last thirty years the mining of coal in this state has been very important-with few people realizing its value. In the mineral industry, the value of the annual production of coal is exceeded by none of the non-metallics, and only by gold, silver, and copper in the metallics. At the present time the coal production of Montana is valued at about 41000,000.00 annually.

Spectrographic Analysis of Montana Limestones

Spectrographic analysis of limestones as a possible method of correlation of geologic formations is an altogether new line of investigation. As far as known the only previous work consists of a few analyses made by Fred Lines in his bachelor thesis work at Montana School of mines in the spring of 1942.

Concentration by Flotation of a Complex Galena - Sphalerite - Chalcopyrite Ore from the Nine Mile District Near Missoula, Montana

At the present time ore bodies being mined are becoming more and more complex in mineral association, thus presenting a more difficult problem in their concentration. Lead-zinc sulphide ores are among the more common ores which present such difficulties.

Integration of QUAL2Kw and ArcGIS for Silver Bow Creek, Montana

The purpose of this project is to take preliminary steps towards the development of a QUAL2Kw model for Silver Bow Creek, MT. These preliminary steps include initial research and familiarization with QUAL2Kw, use of ArcGIS to fill in geospatial data gaps, and integration of QUAL2Kw and ArcGIS. The integration involves improvement of the QUAL2Kw model output through adding functionality to the model itself, and development of a QUAL2Kw specific tool in ArcGIS. These improvements are designed to help expedite and simplify the viewing of QUAL2Kw output data spatially in ArcGIS as opposed to graphically within QUAL2Kw. These improvements will allow users to quickly and easily view the many output parameters of each model run geographically within ArcGIS. This will make locating potential problem areas or “hot spots” much quicker and easier than interpreting the QUAL2Kw output data from a graph alone. The added functionality of QUAL2KW was achieved through the development of an excel Macro, and the tool in ArcGIS was developed using python scripting and the model builder feature in ArcGIS.

Subsurface to Surface Correlation of the Tensleep Sandstone in the West Flank of the Pryor Mountains in Carbon County, Montana

The Pennsylvanian Tensleep Sandstone is an eolian and nearshore marine/sabka quartz arenite unit with prominent outcrops along the western Pryor/Bighorn Mountain front east of Red Lodge, MT. Regionally, the formation represents one of the largest ergs in the global geologic record. High permeability makes it an important oil and gas reservoir and aquifer in south central Montana and throughout much of Wyoming. The Tensleep Sandstone’s high percentage of quartz content and grain roundness, due to its eolian origin, makes it a prospective source for natural proppant sand. Three continuous 4-inch cores were obtained during a cooperative project between Montana Tech and industry partners. Using stratigraphic sections, cores, thin sections, and x-ray fluorescence (XRF) analysis, the usefulness and economic feasibility of the Tensleep Sandstone as a minable hydraulic fracture proppant was explored. Usefulness depends on cementation, grain shape, grain size, and depth from surface of the prospective zone. Grain shape and size were determined by thin sections, sieving, and stereomicroscope analysis. Analysis of 20 disaggregated sand samples has shown that as much as 30 percent of the grain sizes fall between 30-50 mesh (medium- to finegrained sand size) and about 45 percent of the grain sizes fall between 70–140 mesh (very fine-grained sand to coarse silt), grain sizes appropriate for some hydraulic fracture operations. Core descriptions and XRF data display the distribution of lithology and cementation. Core descriptions and XRF data display the distribution of lithology and cementation. Elemental (XRF) analyses help to delineate more pure quartz sands from those with grain fractions reflecting fine-grained clastic and evaporitic inputs. The core and nearby stratigraphic sections are used to quantify the amount of overburden and the 3 amount of resource in the area. Initial results show favorable crush strength and useable grain size and shape.

Geochemistry and Stable Isotopes of Surface Water and Groundwater in the Continental Pit in Butte, Montana, USA

The Continental porphyry Cu‐Mo mine, located 2 km east of the famous Berkeley Pit lake of Butte, Montana, contains two small lakes that vary in size depending on mining activity. In contrast to the acidic Berkeley Pit lake, the Continental Pit waters have near-neutral pH and relatively low metal concentrations. The main reason is geological: whereas the Berkeley Pit mined highly‐altered granite rich in pyrite with no neutralizing potential, the Continental Pit is mining weakly‐altered granite with lower pyrite concentrations and up to 1‐2% hydrothermal calcite. The purpose of this study was to gather and interpret information that bears on the chemistry of surface water and groundwater in the active Continental Pit. Pre‐existing chemistry data from sampling of the Continental Pit were compiled from the Montana Bureau of Mines and Geology and Montana Department of Environmental Quality records. In addition, in March of 2013, new water samples were collected from the mine’s main dewatering well, the Sarsfield well, and a nearby acidic seep (Pavilion Seep) and analyzed for trace metals and several stable isotopes, including dD and d18O of water, d13C of dissolved inorganic carbon, and d34S of dissolved sulfate. In December 2013, several soil samples were collected from the shore of the frozen pit lake and surrounding area. The soil samples were analyzed using X‐ray diffraction to determine mineral content. Based on Visual Minteq modeling, water in the Continental Pit lake is near equilibrium with a number of carbonate, sulfate, and molybdate minerals, including calcite, dolomite, rhodochrosite (MnCO3), brochantite (CuSO4·3Cu(OH)2), malachite (Cu2CO3(OH)2), hydrozincite (Zn5(CO3)2(OH)6), gypsum, and powellite (CaMoO4). The fact that these minerals are close to equilibrium suggests that they are present on the weathered mine walls and/or in the sediment of the surface water ponds. X‐Ray Diffraction (XRD) analysis of the pond “beach” sample failed to show any discrete metal‐bearing phases. One of the soil samples collected higher in the mine, near an area of active weathering of chalcocite‐rich ore, contained over 50% chalcanthite (CuSO4·5H2O). This water‐soluble copper salt is easily dissolved in water, and is probably a major source of copper to the pond and underlying groundwater system. However, concentrations of copper in the latter are probably controlled by other, less‐soluble minerals, such as brochantite or malachite. Although the acidity of the Pavilion Seep is high (~ 11 meq/L), the flow is much less than the Sarsfield Well at the current time. Thus, the pH, major and minor element chemistry in the Continental Pit lakes are buffered by calcite and other carbonate minerals. For the Continental Pit waters to become acidic, the influx of acidic seepage (e.g., Pavilion Seep) would need to increase substantially over its present volume.

Fluorite Near Silver Bow, Montana

The wartime demand for fluorspar has caused renewed interest in fluorite deposits. Near Silver Bow, Montana, a deposit of massive, coarsely crystalline fluorspar, which has not been described in the literature, has attracted the atten­tion of the United States Geological Survey.

Permability and Porosity of Devonian Dolomites in Northwestern Montana

The purpose of this investigation is to record data per­taining to porosity and permeability derived from physical tests performed on Devonian dolomites occurring in northwestern Montana, and to subsequently summarize the results obtained as an aid in determining the possibility of those dolomites being suitable reservoir rocks for oil and gas accumulation.