The Characteristics of the Electrolyte in the Series System of Electrolytic Copper Refining

Almost everyone is familiar with the tremendous importance of copper in our everyday life. One of the pro­perties of copper which determines its great usefulness to mankind is its electrical conductivity. This property alone has more to do with the prominence of copper among useful metals then does any other.

The Casting of Anodes for the Series System of Electrolytic Copper Refining

The electrolytic refining process, while usually considered an auxiliary process used in conjunction with pyrometallurgical extraction, deserves a special niche in the complex metallurgy of copper. The development of electrolytic copper refining, for example, is largely responsible for the prominence of the electrical industry. Conversely, it could be stated that the electrical industry played an important part in the development of the copper industry.

Aluminum - Bronze Compacts and their Possible Use as a Bearing Material

In the modern aspect of powder metallurgy, the first use of a sintering process was in making filaments for incandescent electric lamps.In the short while from the day of Edison to the pres­ent, the science of working with metal powders has advanced by leaps and bounds.

An Isopach Map and Discussion of Triassic Strata in Southern Montana and Wyoming

Oil and gas have been found in the Triassic strata of Wyoming. Although the Triassic has not as yet proven to be a large producing horizon it is very probable that ad­ditional oil will be found in Triassic strata in the future, and it is one of the goals at which oil well drillers aim their tools.

Foraminifera from the Colorado Shale of North-Central Montana

The use of foraminifera in the determination of geologic age, and in the correlation of strata, is one of the most important techniques in oil field stratigraphic studies. The petroleum industry in many regions relies on these microscopic life forms to determine the positions of oil-bearing horizons and to determine the tops of beds. In northern Montana the Colorado group of strata, a series of about 2,000 feet of dense, dark similar shales, is known to contain foraminifers.

A Mineral Dressing and Economic Study of a Complex Arsenical Ore

The factors that influence the choice of a method for treat­ment of an ore comprise the technical and economic limitations and advantages, derived in detail and balanced according to the exigencies of the particular situation.

Separation of Cadmium from Zinc in the Purification Step of the Leaching Cycle

The purpose of this investigation is to determine the effect of the factors listed previously by conducting a series of tests that will indicate the ex­tent to which the purification is influenced by time, temperature, zinc oust size, zinc dust quantity, iron concentration, two stage precipitation, and aeration.

Montana Talc; Problems in Physical Properties

General information on talc, including foreign and United States occurrences, origin, and uses is covered. Montana deposits are discussed in greater detail as to location, geology, mineralogy, and mining. Studies of talc by petrographic and x-ray methods and an experiment to determine the porosity are described and discussed.

Mineralization of the Bonanza Mine

The Bonanza mine of the Emery mining district in Powell County is on the largest veins in the area, and is developed to a depth of 680 feet by an incline shaft following the dip of the structure. Sulfide ores carrying gold and silver values are mined throughout the area which is easily accessible by road from Deerlodge, Montana, ten miles west of the district.

The Lilly Mine of Powell County, Montana

For many years the Elliston District, of Powell County has been a minor producer of gold, lead, zinc, and silver. Although never among the largest producing districts of the state, it has with the exception of the war years supplied a notable tonnage of ore to the neighboring mills ever since the first placer and lode claims were located there during the late eighteen hundreds.

Geology of Smoke Hollow Area 8 Miles Southeast of Deerlodge, Powell County, Montana

This investigation was undertaken primarily as a problem in geologic mapping. The stratigraphy was studied as to the character, age, and sequence of the geologic formations that are exposed. The conclusions were based principally on the field relationships and lithology because no fossils were found.

An Isothermal Study of an S.A.E. 6150 Steel

The purpose of this thesis is to set forth the method followed, the laboratory procedure practiced, the results obtained, the conclu­sions drawn, and the recommendations proposed as a consequence of a metallographic study of the isothermal transformation of an S.A.E. 6150 steel.

The Alloys of Gallium and Indium

Thermal analysis VIPS used to construct cooling and heating curves from which the phase diagram was determined. The data for the entire set of cooling curves were obtained by the use of mercury thermo­meters.

Hot-Dip Aluminizing of Low-Carbon Steels

In a relatively short period of sixty-five years, aluminum has grown to the rank of fifth in total weight of met­als produced in the world. Throughout its short life, aluminum has been found to have excellent corrosion-resistant properties; yet only in recent years has aluminum been under consideration as a corrosion-resistant coating for iron and steel.

Physiographic Surfaces and Weathering Near Butte

Three cycles of erosion have modified the Boulder batholith. The earliest cycle produced a peneplaination that has been largely obliterated by a partially completed intermediate cycle, and the recent cycle now in progress.