Using a Prediction and Option Generation Paradigm to Understand Decision Making

In many complex and dynamic domains, the ability to generate and then select the appropriate course of action is based on the decision maker's "reading" of the situation--in other words, their ability to assess the situation and predict how it will evolve over the next few seconds. Current theories regarding option generation during the situation assessment and response phases of decision making offer contrasting views on the cognitive mechanisms that support superior performance. The Recognition-Primed Decision-making model (RPD; Klein, 1989) and Take-The-First heuristic (TTF; Johnson & Raab, 2003) suggest that superior decisions are made by generating few options, and then selecting the first option as the final one. Long-Term Working Memory theory (LTWM; Ericsson & Kintsch, 1995), on the other hand, posits that skilled decision makers construct rich, detailed situation models, and that as a result, skilled performers should have the ability to generate more of the available task-relevant options. The main goal of this dissertation was to use these theories about option generation as a way to further the understanding of how police officers anticipate a perpetrator's actions, and make decisions about how to respond, during dynamic law enforcement situations. An additional goal was to gather information that can be used, in the future, to design training based on the anticipation skills, decision strategies, and processes of experienced officers. Two studies were conducted to achieve these goals. Study 1 identified video-based law enforcement scenarios that could be used to discriminate between experienced and less-experienced police officers, in terms of their ability to anticipate the outcome. The discriminating scenarios were used as the stimuli in Study 2; 23 experienced and 26 less-experienced police officers observed temporally-occluded versions of the scenarios, and then completed assessment and response option-generation tasks. The results provided mixed support for the nature of option generation in these situations. Consistent with RPD and TTF, participants typically selected the first-generated option as their final one, and did so during both the assessment and response phases of decision making. Consistent with LTWM theory, participants--regardless of experience level--generated more task-relevant assessment options than task-irrelevant options. However, an expected interaction between experience level and option-relevance was not observed. Collectively, the two studies provide a deeper understanding of how police officers make decisions in dynamic situations. The methods developed and employed in the studies can be used to investigate anticipation and decision making in other critical domains (e.g., nursing, military). The results are discussed in relation to how they can inform future studies of option-generation performance, and how they could be applied to develop training for law enforcement officers.

THE USE OF LIFE-CYCLE ANALYSIS TO REDUCE THE ENVIRONMENTAL IMPACT OF MATERIALS IN MANUFACTURING

This thesis is composed of three life-cycle analysis (LCA) studies of manufacturing to determine cumulative energy demand (CED) and greenhouse gas emissions (GHG). The methods proposed could reduce the environmental impact by reducing the CED in three manufacturing processes. First, industrial symbiosis is proposed and a LCA is performed on both conventional 1 GW-scaled hydrogenated amorphous silicon (a-Si:H)-based single junction and a-Si:H/microcrystalline-Si:H tandem cell solar PV manufacturing plants and such plants coupled to silane recycling plants. Using a recycling process that results in a silane loss of only 17 versus 85 percent, this results in a CED savings of 81,700 GJ and 290,000 GJ per year for single and tandem junction plants, respectively. This recycling process reduces the cost of raw silane by 68 percent, or approximately $22.6 and $79 million per year for a single and tandem 1 GW PV production facility, respectively. The results show environmental benefits of silane recycling centered around a-Si:H-based PV manufacturing plants. Second, an open-source self-replicating rapid prototype or 3-D printer, the RepRap, has the potential to reduce the environmental impact of manufacturing of polymer-based products, using distributed manufacturing paradigm, which is further minimized by the use of PV and improvements in PV manufacturing. Using 3-D printers for manufacturing provides the ability to ultra-customize products and to change fill composition, which increases material efficiency. An LCA was performed on three polymer-based products to determine the CED and GHG from conventional large-scale production and are compared to experimental measurements on a RepRap producing identical products with ABS and PLA. The results of this LCA study indicate that the CED of manufacturing polymer products can possibly be reduced using distributed manufacturing with existing 3-D printers under 89% fill and reduced even further with a solar photovoltaic system. The results indicate that the ability of RepRaps to vary fill has the potential to diminish environmental impact on many products. Third, one additional way to improve the environmental performance of this distributed manufacturing system is to create the polymer filament feedstock for 3-D printers using post-consumer plastic bottles. An LCA was performed on the recycling of high density polyethylene (HDPE) using the RecycleBot. The results of the LCA showed that distributed recycling has a lower CED than the best-case scenario used for centralized recycling. If this process is applied to the HDPE currently recycled in the U.S., more than 100 million MJ of energy could be conserved per annum along with significant reductions in GHG. This presents a novel path to a future of distributed manufacturing suited for both the developed and developing world with reduced environmental impact. From improving manufacturing in the photovoltaic industry with the use of recycling to recycling and manufacturing plastic products within our own homes, each step reduces the impact on the environment. The three coupled projects presented here show a clear potential to reduce the environmental impact of manufacturing and other processes by implementing complimenting systems, which have environmental benefits of their own in order to achieve a compounding effect of reduced CED and GHG.