Father Dietz, the Catholic Church and the 1913 Michigan Copper Strike

Labor Historian Marc Karson has singled out “labor priest” Peter E. Dietz as one of the strongest proponents for the active implementation of the Catholic Church’s 1890’s labor encyclical Rerum Novarum in the daily practice of American Catholics. Biographer Sister Mary Harrita Fox pointed out that in his work, Dietz “was particularly concerned over the role of the church in the copper strike in Upper Michigan.” This “particular concern” should be noted since the 1913 strike was one of the only disputes where Dietz went out of his way to visit and become actively involved. Why the keen interest? This presentation will review the impetus for the huge effort which brought Peter E. Dietz to the Copper Country and solely to that dispute alone, the resulting visit and report that he made concerning the strike, the important role he believed this visit and stance in the Copper Strike had in the future of the Church’s relationship to the US labor movement. The presentation will look at both what Dietz thought would occur as a result of his 1913 trip to the Keweenaw and what actually happened in this pivotal pre-World War One era event. The paper will put Father Peter E. Dietz and the Catholic Church into the larger frame of how religion has been viewed within the history of the Strike.

Diesel spray mixing limited vaporization with non-ideal and multi-component fuel thermophysical property effects

Internal combustion engines are, and will continue to be, a primary mode of power generation for ground transportation. Challenges exist in meeting fuel consumption regulations and emission standards while upholding performance, as fuel prices rise, and resource depletion and environmental impacts are of increasing concern. Diesel engines are advantageous due to their inherent efficiency advantage over spark ignition engines; however, their NOx and soot emissions can be difficult to control and reduce due to an inherent tradeoff. Diesel combustion is spray and mixing controlled providing an intrinsic link between spray and emissions, motivating detailed, fundamental studies on spray, vaporization, mixing, and combustion characteristics under engine relevant conditions. An optical combustion vessel facility has been developed at Michigan Technological University for these studies, with detailed tests and analysis being conducted. In this combustion vessel facility a preburn procedure for thermodynamic state generation is used, and validated using chemical kinetics modeling both for the MTU vessel, and institutions comprising the Engine Combustion Network international collaborative research initiative. It is shown that minor species produced are representative of modern diesel engines running exhaust gas recirculation and do not impact the autoignition of n-heptane. Diesel spray testing of a high-pressure (2000 bar) multi-hole injector is undertaken including non-vaporizing, vaporizing, and combusting tests, with sprays characterized using Mie back scatter imaging diagnostics. Liquid phase spray parameter trends agree with literature. Fluctuations in liquid length about a quasi-steady value are quantified, along with plume to plume variations. Hypotheses are developed for their causes including fuel pressure fluctuations, nozzle cavitation, internal injector flow and geometry, chamber temperature gradients, and turbulence. These are explored using a mixing limited vaporization model with an equation of state approach for thermopyhysical properties. This model is also applied to single and multi-component surrogates. Results include the development of the combustion research facility and validated thermodynamic state generation procedure. The developed equation of state approach provides application for improving surrogate fuels, both single and multi-component, in terms of diesel spray liquid length, with knowledge of only critical fuel properties. Experimental studies are coupled with modeling incorporating improved thermodynamic non-ideal gas and fuel

Through the back door : Melungeon literacies and 21st century technologies

The Melungeons, a minority recognized in Southern Appalachia where they settled in the early 1800s, have mixed heritage—European, Mediterranean, Native American, and Sub-Saharan African. Their dark skin and distinctive features have marked them and been the cause of racial persecution both by custom and by law in Appalachia for two centuries. Their marginalization has led to an insider mentality, which I call a “literacy” of Melungeon-ness that affects every facet of their lives. Just a century ago, while specialized practices such as farming, preserving food, hunting, gathering, and distilling insured survival in the unforgiving mountain environment, few Melungeons could read or write. Required to pay property taxes and render military service, they were denied education, suffrage, and other legal rights. In the late 1890s visionary Melungeon leader Batey Collins invited Presbyterian homemissionaries to settle in one Tennessee Melungeon community where they established a church and built a school of unparalleled excellence. Educator-ministers Mary Rankin and Chester Leonard creatively reified the theories of Dewey, Montessori, and Rauschenbusch, but, despite their efforts, school literacy did not neutralize difference. Now, taking reading and writing for granted, Melungeons are exploring their identity by creating websites and participating in listserv discussions. These online expressions, which provide texts for rhetorical, semiotic, and socio-linguistic analysis, illustrate not solidarity but fragmentation on issues of origins and legitimacy. Armed with literacies of difference stemming from both nature and nurture, Melungeons are using literacy practices to embrace the difference they cannot escape.

Structural and surface property characterization of titanium dioxide nanotubes for orthopedic implants

This research focused on the to modification of the surface structure of titanium implants with nanostructured morphology of TiO2 nanotubes and studied the interaction of nanotubes with osteoblast cells to understand the parameters that affect the cell growth. The electrical, mechanical, and structural properties of TiO2 nanotubes were characterized to establish a better understanding on the properties of such nanoscale morphological structures. To achieve the objectives of this research work I transformed the titanium and its alloys, either in bulk sheet form, bulk machined form, or thin film deposited on another substrate into a surface of titania nanotubes using a low cost and environmentally friendly process. The process requires only a simple electrolyte, low cost electrode, and a DC power supply. With this simple approach of scalable nanofabrication, a typical result is nanotubes that are each approximately 100nm in diameter and have a wall thickness of about 20nm. By changing the fabrication parameters, independent nanotubes can be fabricated with open volume between them. Titanium in this form is termed onedimensional since electron transport is narrowly confined along the length of the nanotube. My Ph.D. accomplishments have successfully shown that osteoblast cells, the cells that are the precursors to bone, have a strong tendency to attach to the inside and outside of the titanium nanotubes onto which they are grown using their filopodia – cell’s foot used for locomotion – anchored to titanium nanotubes. In fact it was shown that the cell prefers to find many anchoring sites. These sites are critical for cell locomotion during the first several weeks of maturity and upon calcification as a strongly anchored bone cell. In addition I have shown that such a surface has a greater cell density than a smooth titanium surface. My work also developed a process that uses a focused and controllably rastered ion beam as a nano-scalpel to cut away sections of the osteoblast cells to probe the attachment beneath the main cell body. Ultimately the more rapid growth of osteoblasts, coupled with a stronger cell-surface interface, could provide cost reduction, shorter rehabilitation, and fewer follow-on surgeries due to implant loosening.

Experimental and theoretical study of microstructure effect on piezoelectric property of one dimensional ZnO nanostructures

Emerging nanogenerators have attracted the attention of the research community, focusing on energy generation using piezoelectric nanomaterials. Nanogenerators can be utilized for powering NEMS/MEMS devices. Understanding the piezoelectric properties of ZnO one-dimensional materials such as ZnO nanobelts (NBs) and Nanowires (NWs) can have a significant impact on the design of new devices. The goal of this dissertation is to study the piezoelectric properties of one-dimensional ZnO nanostructures both experimentally and theoretically. First, the experimental procedure for producing the ZnO nanostructures is discussed. The produced ZnO nanostructures were characterized using an in-situ atomic force microscope and a piezoelectric force microscope. It is shown that the electrical conductivity of ZnO NBs is a function of applied mechanical force and its crystalline structure. This phenomenon was described in the context of formation of an electric field due to the piezoelectric property of ZnO NBs. In the PFM studies, it was shown that the piezoelectric response of the ZnO NBs depends on their production method and presence of defects in the NB. Second, a model was proposed for making nanocomposite electrical generators based on ZnO nanowires. The proposed model has advantages over the original configuration of nanogenerators which uses an AFM tip for bending the ZnO NWs. Higher stability of the electric source, capability for producing larger electric fields, and lower production costs are advantages of this configuration. Finally, piezoelectric properties of ZnO NBs were simulated using the molecular dynamics (MD) technique. The size-scale effect on piezoelectric properties of ZnO NBs was captured, and it is shown that the piezoelectric coefficient of ZnO NBs decreases by increasing their lateral dimensions. This phenomenon is attributed to the surface charge redistribution and compression of unit cells that are placed on the outer shell of ZnO NBs.