3 resultados para Bellingshausen Sea, steep slope east of TMF

em Digital Commons - Michigan Tech


Relevância:

100.00% 100.00%

Publicador:

Resumo:

The Mount Meager Volcanic Complex (MMVC) in south-western British Columbia is a potentially active, hydrothermally altered massif comprising a series of steep, glaciated peaks. Climatic conditions and glacial retreat has led to the further weathering, exposure and de-buttressing of steep slopes composed of weak, unconsolidated material. This has resulted in an increased frequency of landslide events over the past few decades, many of which have dammed the rivers bordering the Complex. The breach of these debris dams presents a risk of flooding to the downstream communities. Preliminary mapping showed there are numerous sites around the Complex where future failure could occur. Some of these areas are currently undergoing progressive slope movement and display features to support this such as anti-scarps and tension cracks. The effect of water infiltration on stability was modelled using the Rocscience program Slide 6.0. The main site of focus was Mount Meager in the south- east of the Complex where the most recent landslide took place. Two profiles through Mount Meager were analysed along with one other location in the northern section of the MMVC, where instability had been detected. The lowest Factor of Safety (FOS) for each profile was displayed and an estimate of the volume which could be generated was deduced. A hazard map showing the inundation zones for various volumes of debris flows was created from simulations using LAHARZ. Results showed the massif is unstable, even before infiltration. Varying the amount of infiltration appears to have no significant impact on the FOS annually implying that small changes of any kind could also trigger failure. Further modelling could be done to assess the impact of infiltration over shorter time scales. The Slide models show the volume of material that could be delivered to the Lillooet River Valley to be of the order of 109 m3 which, based on the LAHARZ simulations, would completely inundate the valley and communities downstream. A major hazard of this is that the removal of such a large amount of material has the potential to trigger an explosive eruption of the geothermal system and renew volcanic activity. Although events of this size are infrequent, there is a significant risk to the communities downstream of the complex.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

La Yeguada volcanic complex is one of three Quaternary volcanic centers in Panama, and is located on the southern slope of the Cordillera Central mountain range in western Panama, province of Veraguas. To assess potential geologic hazards, this study focused on the main dome complex near the village of La Laguna and also examined a cinder cone 10 km to the northwest next to the village of Media Luna. Based on newly obtained 40Ar/39Ar ages, the most recent eruption occurred approximately 32 000 years ago at the Media Luna cinder cone, while the youngest dated eruption at the main dome complex occurred 0.357 ± 0.019 Ma, producing the Castillo dome unit. Cerro Picacho is a separate dome located 1.5 km east of the main complex with a date of 4.47 ± 0.23 Ma, and the El Satro Pyroclastic Flow unit surrounds the northern portion of the volcanic complex and has an age of 11.26 ± 0.17 Ma. No Holocene (10 000 years ago to present) activity is recorded at the La Yeguada volcanic complex and therefore, it is unlikely to produce another eruption. The emergence of a new cinder cone is a possibility, but the associated hazards tend to be low and localized, and this does not pose a significant threat to the small communities scattered throughout the area. The main geologic hazard at the La Yeguada volcanic complex is from landslides coming off the many steep slopes.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Recently, water was observed flowing from a section of steep slope along US-2 near St. Ignace, Michigan in addition to soil sloughing in the area where the water is flowing from the slope. An inspection of the area also showed the presence of sinkholes. The original construction drawing for US-2 also indicated that sinkholes were present in this area prior to road construction in 1948. An investigation was conducted to determine the overall stability of the slope. The slope consists primarily of aeolian sand deposits. Laboratory testing determined the shear strength of the slope material to have a friction angle around 30°, which is also the slope angle. Thus, the slope is at its maximum angle for stability—however, the slope is also heavily wooded which provides additional support to the slope. Although the area surrounding the water flow has been sloughing, the remaining slope remains intact.