Development of an optimization model for biofuel facility size and location and a simulation model for design of a biofuel supply chain

To mitigate greenhouse gas (GHG) emissions and reduce U.S. dependence on imported oil, the United States (U.S.) is pursuing several options to create biofuels from renewable woody biomass (hereafter referred to as “biomass”). Because of the distributed nature of biomass feedstock, the cost and complexity of biomass recovery operations has significant challenges that hinder increased biomass utilization for energy production. To facilitate the exploration of a wide variety of conditions that promise profitable biomass utilization and tapping unused forest residues, it is proposed to develop biofuel supply chain models based on optimization and simulation approaches. The biofuel supply chain is structured around four components: biofuel facility locations and sizes, biomass harvesting/forwarding, transportation, and storage. A Geographic Information System (GIS) based approach is proposed as a first step for selecting potential facility locations for biofuel production from forest biomass based on a set of evaluation criteria, such as accessibility to biomass, railway/road transportation network, water body and workforce. The development of optimization and simulation models is also proposed. The results of the models will be used to determine (1) the number, location, and size of the biofuel facilities, and (2) the amounts of biomass to be transported between the harvesting areas and the biofuel facilities over a 20-year timeframe. The multi-criteria objective is to minimize the weighted sum of the delivered feedstock cost, energy consumption, and GHG emissions simultaneously. Finally, a series of sensitivity analyses will be conducted to identify the sensitivity of the decisions, such as the optimal site selected for the biofuel facility, to changes in influential parameters, such as biomass availability and transportation fuel price. Intellectual Merit The proposed research will facilitate the exploration of a wide variety of conditions that promise profitable biomass utilization in the renewable biofuel industry. The GIS-based facility location analysis considers a series of factors which have not been considered simultaneously in previous research. Location analysis is critical to the financial success of producing biofuel. The modeling of woody biomass supply chains using both optimization and simulation, combing with the GIS-based approach as a precursor, have not been done to date. The optimization and simulation models can help to ensure the economic and environmental viability and sustainability of the entire biofuel supply chain at both the strategic design level and the operational planning level. Broader Impacts The proposed models for biorefineries can be applied to other types of manufacturing or processing operations using biomass. This is because the biomass feedstock supply chain is similar, if not the same, for biorefineries, biomass fired or co-fired power plants, or torrefaction/pelletization operations. Additionally, the research results of this research will continue to be disseminated internationally through publications in journals, such as Biomass and Bioenergy, and Renewable Energy, and presentations at conferences, such as the 2011 Industrial Engineering Research Conference. For example, part of the research work related to biofuel facility identification has been published: Zhang, Johnson and Sutherland [2011] (see Appendix A). There will also be opportunities for the Michigan Tech campus community to learn about the research through the Sustainable Future Institute.

Technology, Transportation, and Scale in the Koyokuk Placer Mining District 1890s - 1930s

The Koyukuk Mining District was one of several northern, turn of the century, gold rush regions. Miners focused their efforts in this region on the Middle Fork of the Koyukuk River and on several of its tributaries. Mining in the Koyukuk began in the 1880s and the first rush occurred in 1898. Continued mining throughout the early decades of the 1900s has resulted in an historic mining landscape consisting of structures, equipment, mining shafts, waste rock, trash scatters, and prospect pits. Modern work continues in the region alongside these historic resources. An archaeological survey was completed in 2012 as part of an Abandoned Mine Lands survey undergone with the Bureau of Land Management, Michigan Technological University, and the University of Alaska Anchorage. This thesis examines the discrepancy between the size of mining operations and their respective successes in the region while also providing an historical background on the region and reports on the historical resources present.

DEVELOPMENT OF THE ECOCAR 3 PROPOSAL AND GUIDELINES FOR MODELING AND DESIGN IN YEAR ONE OF ECOCAR 3

This report summarizes the work done for the Vehicle Powertrain Modeling and Design Problem Proposal portion of the EcoCAR3 proposal as specified in the Request for Proposal from Argonne National Laboratory. The results of the modeling exercises presented in the proposal showed that: An average conventional vehicle powered by a combustion engine could not meet the energy consumption target when the engine was sized to meet the acceleration target, due the relatively low thermal efficiency of the spark ignition engine. A battery electric vehicle could not meet the required range target of 320 km while keeping the vehicle weight below the gross vehicle weight rating of 2000 kg. This was due to the low energy density of the batteries which necessitated a large, and heavy, battery pack to provide enough energy to meet the range target. A series hybrid electric vehicle has the potential to meet the acceleration and energy consumption parameters when the components are optimally sized. A parallel hybrid electric vehicle has less energy conversion losses than a series hybrid electric vehicle which results in greater overall efficiency, lower energy consumption, and less emissions. For EcoCAR3, Michigan Tech proposes to develop a plug-in parallel hybrid vehicle (PPHEV) powered by a small Diesel engine operating on B20 Bio-Diesel fuel. This architecture was chosen over other options due to its compact design, lower cost, and its ability to provide performance levels and energy efficiency that meet or exceed the design targets. While this powertrain configuration requires a more complex control system and strategy than others, the student engineering team at Michigan Tech has significant recent experience with this architecture and has confidence that it will perform well in the events planned for the EcoCAR3 competition.

From Mill Gates to Magic City: U.S. Steel and Welfare Capitalism in Gary, Indiana, 1906-1930

Gary, Indiana is a city with indelible ties to industrial paternalism. Founded in 1906 by United States Steel Corporation to house workers of the trust’s showpiece mill, the emergence of this model company town was both the culmination of lessons learned from its predecessors’ mistakes and innovative corporate planning. U.S. Steel’s Progressive Era adaptation of welfare capitalism characterized the young city through a combination of direct community involvement and laissez-faire social control. This thesis examines the reactionary implementation of paternalist policies in Gary between 1906 and 1930 through the purviews of three elements under corporate influence: housing, education, and social welfare. Each category demonstrates how both the corporation and citizenry affected and adapted Gary’s physical and cultural landscape, public perceptions, and community identity. Parallel to the popular narrative throughout is that of Gary’s African-American community, and the controversial circumstances of this population’s segregated development.

HOG CHAINS AND MARK TWAINS: A STUDY OF LABOR HISTORY, ARCHAEOLOGY, AND INDUSTRIAL ETHNOGRAPHY OF THE STEAMBOAT ERA OF THE MONONGAHELA VALLEY 1811-1950

This dissertation examines a unique working class in the United States, the men and women who worked on the steamboats from the Industrial Revolution until the demise of steam-powered boats in the mid-20th century. The steamboat was the beginning of a technological system that was developed in America and used in such great numbers that it made the rapid population of the Trans-Appalachian West possible. The steamboat was forever romanticized by images of the antebellum South or the quick wit of Samuel Clemens and his sentimental book, Life on the Mississippi. The imagination swirls with thoughts of boats, bleach white, slowly churning the calm waters of some Spanish moss covered river. The reality of the boats and the experience of those who worked on them has been lost in this nostalgic vision. This research details the history of the western steamboat in the Monongahela Valley, the birthplace of the commercial steamboat industry. The first part of this dissertation examines the literature of authors in the field of labor history and Industrial Archaeology to place this work into the larger context of published literature. The second builds a framework for understanding the various eras that the steamboat went through both in terms of technological change, but also the change the workers experienced as their identity as a working class was being shaped. The third part details the excavations of two steamboat captains houses, those of Captain James Gormley and Captain Michael A. Cox. Both men represented a time in which the steamboat was in an era of transition. Excavations at their homes yield clues to their class status and how integrated they were in the local community. The fourth part of this study documents the oral histories of steamboat workers, both men and women, and their experience on the boats and on the river. Their rapidly declining population of those who lived and worked on the boats gives urgency for their lives to be documented. Finally, this study concludes with a synthesis of how worker identity solidified in the face of technological, socio-economic, and ideological change especially during their push for unionization and the introduction of the diesel towboat.