OPTIMIZING A SHORT-END ELECTROPHORETICALLY MEDIATED MICRO-ANALYSIS (EMMA) ASSAY FOR CREATININE

In this work electrophoretically mediated micro-analysis (EMMA) is used in conjunction with short end injection to improve the in-capillary Jaffé assay for creatinine. Key advances over prior work include (i) using simulation to ensure intimate overlap of reagent plugs, (ii) using OH- to drive the reaction, (iii) using short-end injection to minimize analysis time and in-line product degradation. The potential-driven overlapping time with the EMMA approach, as well as the borate buffer background electrolyte (BGE) concentration and pH are optimized with the short end approach. The best conditions for short-end analyses would not have been predicted by the prior long end work, owing to a complex interplay of separation time and product degradation rates. Raw peak areas and flow-adjusted peak areas for the Jaffé reaction product (at 505 nm) are used to assess the sensitivity of the short-end EMMA approach. Optimal overlap conditions depend heavily on local conductivity differences within the reagent zone(s), as these differences cause dramatic voltage field differences, which effect reagent overlap dynamics. Simul 5.0, a dynamic simulation program for capillary electrophoresis (CE) systems, is used to understand the ionic boundaries and profiles that give rise to the experimentally obtained data for EMMA analysis. Overall, fast migration of hydroxide ions from the picrate zone makes difficult reagent overlap. In addition, the challenges associated with the simultaneous overlapping of three reagent zones are considered, and experimental results validate the predictions made by the simulation. With one set of “optimized” conditions including OH- (253 mM) as the third reagent zone the response was linear with creatinine concentration (R2 = 0.998) and reproducible over the clinically relevant range (0.08 to 0.1 mM) of standard creatinine concentrations. An LOD (S/N = 3) of 0.02 mM and LOQ (S/N=10) of 0.08 mM were determined. A significant improvement (43%) in assay sensitivity was obtained compared to prior work that considered only two reagents in the overlap.

How Much Is Enough? an Analysis of the 5' Nontranslated Region of the Deformed Wing Virus in Honeybees

Honeybees are an essential component of today¿s agricultural system because of their role as pollinators. However, viruses, including a member of the Picornavirales order known commonly as Deformed Wing Virus (DWV), are compromising the health of honeybee colonies. Many picornaviruses, such as poliovirus, have been studied in depth because of their relation to human disease, but also because of their use of an Internal Ribosome Entry Site (IRES) to initiate translation. The primary goal of this thesis was to determine if the 5¿ Non-Translated Region (NTR) of Deformed Wing Virus (DWV) functions as an IRES. A secondary goal was to determine if there are specific parts of that 5¿ NTR that are important to IRES function. Six plasmids were constructed by inserting three different sections of the 5¿ NTR of DWV, in both sense and antisense directions, between two reporter genes. These plasmids, along with several control plasmids, were transfected into Sf9 cells, and post-transfection luciferase assays were conducted. Results were inconclusive. This could have been due to an inability of the plasmids to be expressed in Sf9 cells, an error in the construction of the plasmids, or a mechanical error in the assay procedure. At this time it appears most likely that the 5¿ NTR of DWV may be cell-type or species specific, and the next step would be to transfect the plasmids into a recently developed cultured honeybee cell line.