The Investigation of the Ways in Which Gender Stereotypes are Perpetuated through Questioning and Assessment Strategies in Inquiry-Based Science Classroom

The purpose of this study was to investigate the questioning strategies of preservice teachers whenteaching science as inquiry. The guiding questions for this research were: In what ways do the questioning strategies of preservice teachers differ for male and female elementary students when teaching science as inquiry and how is Bloom’s Taxonomy evident within the questioning strategies of preservice teachers? Examination of the data indicated that participants asked a total of 4,158 questions to their elementary aged students. Of these questions, 974 (23%) were asked to boys, and 991 (24%) were asked to girls. The remaining questions (53%) were asked to the class as a whole, therefore no gender could be assigned to these questions. In relation to Bloom’s Taxonomy, 74% of the questions were basic knowledge, 15% were secondary comprehension, 2% were application, 4% were analysis, 1% were synthesis, and 3% were evaluation.

Secondary collisions revisited: real-world crash data and relationship to crash test criteria

Objectives: Previous research conducted in the late 1980s suggested that vehicle impacts following an initial barrier collision increase severe occupant injury risk. Now over 25years old, the data are no longer representative of the currently installed barriers or the present US vehicle fleet. The purpose of this study is to provide a present-day assessment of secondary collisions and to determine if current full-scale barrier crash testing criteria provide an indication of secondary collision risk for real-world barrier crashes. Methods: To characterize secondary collisions, 1,363 (596,331 weighted) real-world barrier midsection impacts selected from 13years (1997-2009) of in-depth crash data available through the National Automotive Sampling System (NASS) / Crashworthiness Data System (CDS) were analyzed. Scene diagram and available scene photographs were used to determine roadside and barrier specific variables unavailable in NASS/CDS. Binary logistic regression models were developed for second event occurrence and resulting driver injury. To investigate current secondary collision crash test criteria, 24 full-scale crash test reports were obtained for common non-proprietary US barriers, and the risk of secondary collisions was determined using recommended evaluation criteria from National Cooperative Highway Research Program (NCHRP) Report 350. Results: Secondary collisions were found to occur in approximately two thirds of crashes where a barrier is the first object struck. Barrier lateral stiffness, post-impact vehicle trajectory, vehicle type, and pre-impact tracking conditions were found to be statistically significant contributors to secondary event occurrence. The presence of a second event was found to increase the likelihood of a serious driver injury by a factor of 7 compared to cases with no second event present. The NCHRP Report 350 exit angle criterion was found to underestimate the risk of secondary collisions in real-world barrier crashes. Conclusions: Consistent with previous research, collisions following a barrier impact are not an infrequent event and substantially increase driver injury risk. The results suggest that using exit-angle based crash test criteria alone to assess secondary collision risk is not sufficient to predict second collision occurrence for real-world barrier crashes.

Second-Generation Orthopaedic Measurement Device for in-vivo Assessment of Bone Quality

There are two main types of bone in the human body, trabecular and cortical bone. Cortical bone is primarily found on the outer surface of most bones in the body while trabecular bone is found in vertebrae and at the end of long bones (Ross 2007). Osteoporosis is a condition that compromises the structural integrity of trabecular bone, greatly reducing the ability of the bone to absorb energy from falls. The current method for diagnosing osteoporosis and predicting fracture risk is measurement of bone mineral density. Limitations of this method include dependence on the bone density measurement device and dependence on type of test and measurement location (Rubin 2005). Each year there are approximately 250,000 hip fractures in the United States due to osteoporosis (Kleerekoper 2006). Currently, the most common method for repairing a hip fracture is a hip fixation surgery. During surgery, a temporary guide wire is inserted to guide the permanent screw into place and then removed. It is believed that directly measuring this screw pullout force may result in a better assessment of bone quality than current indirect measurement techniques (T. Bowen 2008-2010, pers. comm.). The objective of this project is to design a device that can measure the force required to extract this guide wire. It is believed that this would give the surgeon a direct, quantitative measurement of bone quality at the site of the fixation. A first generation device was designed by a Bucknell Biomedical Engineering Senior Design team during the 2008- 2009 Academic Year. The first step of this project was to examine the device, conduct a thorough design analysis, and brainstorm new concepts. The concept selected uses a translational screw to extract the guide wire. The device was fabricated and underwent validation testing to ensure that the device was functional and met the required engineering specifications. Two tests were conducted, one to test the functionality of the device by testing if the device gave repeatable results, and the other to test the sensitivity of the device to misalignment. Guide wires were extracted from 3 materials, low density polyethylene, ultra high molecular weight polyethylene, and polypropylene and the force of extraction was measured. During testing, it was discovered that the spring in the device did not have a high enough spring constant to reach the high forces necessary for extracting the wires without excessive deflection of the spring. The test procedure was modified slightly so the wires were not fully threaded into the material. The testing results indicate that there is significant variation in the screw pullout force, up to 30% of the average value. This significant variation was attributed to problems in the testing and data collection, and a revised set of tests was proposed to better evaluate the performance of the device. The fabricated device is a fully-functioning prototype and further refinements and testing of the device may lead to a 3rd generation version capable of measuring the screw pullout force during hip fixation surgery.

Assessment Of Dynamic Properties Of A Crowd Model For Human-Structure Interaction Modeling

As lightweight and slender structural elements are more frequently used in the design, large scale structures become more flexible and susceptible to excessive vibrations. To ensure the functionality of the structure, dynamic properties of the occupied structure need to be estimated during the design phase. Traditional analysis method models occupants simply as an additional mass; however, research has shown that human occupants could be better modeled as an additional degree-of- freedom. In the United Kingdom, active and passive crowd models are proposed by the Joint Working Group as a result of a series of analytical and experimental research. It is expected that the crowd models would yield a more accurate estimation to the dynamic response of the occupied structure. However, experimental testing recently conducted through a graduate student project at Bucknell University indicated that the proposed passive crowd model might be inaccurate in representing the impact on the structure from the occupants. The objective of this study is to provide an assessment of the validity of the crowd models proposed by JWG through comparing the dynamic properties obtained from experimental testing data and analytical modeling results. The experimental data used in this study was collected by Firman in 2010. The analytical results were obtained by performing a time-history analysis on a finite element model of the occupied structure. The crowd models were created based on the recommendations from the JWG combined with the physical properties of the occupants during the experimental study. During this study, SAP2000 was used to create the finite element models and to implement the analysis; Matlab and ME¿scope were used to obtain the dynamic properties of the structure through processing the time-history analysis results from SAP2000. The result of this study indicates that the active crowd model could quite accurately represent the impact on the structure from occupants standing with bent knees while the passive crowd model could not properly simulate the dynamic response of the structure when occupants were standing straight or sitting on the structure. Future work related to this study involves improving the passive crowd model and evaluating the crowd models with full-scale structure models and operating data.

Assessment of Alcohol Reward in Prairie Voles (Microtus ochrogaster)

The purpose of our study was to assess whether prairie voles find alcohol rewarding. Prairie voles have recently become a species of interest for alcohol studies, which have traditionally used other rodent model species including several different strains of mice and rats. The prairie vole is one of only two known rodent species that readily administers high levels of unsweetened alcohol, implicating it as a potentially effective animal model for studying alcohol abuse. However, voluntary consumption does not necessarily imply that prairie voles find it rewarding. Therefore the purpose of our study was to investigate if alcohol has rewarding properties for prairie voles using three different approaches: place conditioning, flavor conditioning, and immunohistochemistry. Furthermore, we sought to characterize their reward profile and compare it to other commonly used rodent models ¿ C57BL/6 mice, DBA/2J mice, and Sprague-Dawley rats. Place and flavor conditioning are behavioral methods that rely on the learned association between a stimulus and the effects of a drug; the drug of interest in these studies is alcohol. To assess whether prairie voles will demonstrate a conditioned preference for alcohol-paired stimuli, seven place conditioning studies were run that investigated a range of different doses, individual conditioning session durations, and trial durations. Video analysis revealed no difference in the amount of time spent on the alcohol-paired floor, suggesting no conditioned place preference for alcohol. Two flavor conditioning tests were conducted to assess whether voles would demonstrate a preference for an alcohol-paired flavored saccharin solution. Voles demonstrated reduced consumption of the alcohol-paired flavored saccharin solution, regardless of dose or flavor, when alcohol administration occurred after conditioning sessions (p=<0.001). When alcohol was administered before conditioning sessions, no difference in consumption of the alcohol-paired and saline-paired flavored saccharin solutions was seen (p=0.545). Previous studies that have documented similar behavior have hypothesized that this is an example of an anticipatory contrast effect. This theory proposes that prairie voles reduce their intake of a hedonic solution (flavored saccharin solution) in anticipation of later drug administration (alcohol). However, conditioning-based behavioral methods of studying alcohol reward are highly sensitive to the parameters of the conditioned stimulus, thus it is possible that voles will not show preference for alcohol-related stimuli, even if they do find alcohol rewarding. Immunohistochemical analysis supplemented this behavioral data by allowing us to identify specific neural regions that were directly activated in response to the acute administration of alcohol. No difference in the number of activated c-Fos neurons in the Nucleus Accumbens (NAc) core or shell was seen (p=0.3364; p=0.6698) in animals that received an acute injection of alcohol or saline. There was a significant increase in the number of activated c-Fos neurons in the Paraventricular Nucleus of the Hypothalamus (PVN) in alcohol-treated animals compared to saline-treated animals (p=0.0034). There was no difference in the pixel count of activated c-Fos neurons or in the % area activated in the Arcuate Nucleus between alcohol and saline-treated animals (p=0.4523; p=0.3304). In conclusion, the place conditioning studies that were conducted in this thesis suggest that prairie voles do not demonstrate preference or aversion towards alcohol-paired stimuli. The flavor conditioning studies suggest that prairie voles do not demonstrate aversion but rather avoidance of the alcohol-paired flavor in anticipation of future alcohol administration. The preliminary immunohistochemical data collected is inconclusive but cannot rule out the possibility of neuronal activation patterns indicative of reward. Taken together, our data indicate that prairie voles hav

Validation of Two Methods of Data Collection of Self-Reported Medicine Use Among the Elderly

The accuracy of medicine use information was compared for a telephone interview and mail questionnaire, using an in-home medicine check as the standard of assessment The validity of medicine use information varied by data source, level of specificity of data, and respondent characteristics. The mail questionnaire was the more valid source of overall medicine use information. Implications for both service providers and researchers are provided.

Competence of Long-Term Care Residence to Participate in Decisions About Their Medical Care: A Brief, Objective Assessment

Data from 50 residents of a long-term care facility were used to examine the extent to which performance on a brief, objective inventory could predict a clinical psychologist's evaluation of competence to participate in decisions about medical care. Results indicate that the competence to participate in medical decisions of two-thirds of the residents could be accurately assessed using scores on a mental status instrument and two vignette-based measures of medical decision-making. These procedures could enable nursing home staff to objectively assess the competence of residents to participate in important decisions about their medical care.