Processing and Composition Effects on the Fracture Behavior of Spray-Formed 7XXX Series Al Alloys

The fracture properties of high-strength spray-formed Al alloys were investigated, with consideration of the effects of elemental additions such as zinc,manganese, and chromium and the influence of the addition of SiC particulate. Fracture resistance values between 13.6 and 25.6 MPa (m)1/2 were obtained for the monolithic alloys in the T6 and T7 conditions, respectively. The alloys with SiC particulate compared well and achieved fracture resistance values between 18.7 and 25.6 MPa (m)1/2. The spray-formed materials exhibited a loss in fracture resistance (KI) compared to ingot metallurgy 7075 alloys but had an improvedperformance compared to high-solute powder metallurgy alloys of similar composition. Characterization of the fracture surfaces indicated a predominantly intergranular decohesion, possibly facilitated by the presence of incoherent particles at the grain boundary regions and by the large strength differentialbetween the matrix and precipitate zone. It is believed that at the slip band-grain boundary intersection, particularly in the presence of large dispersoids and/or inclusions, microvoid nucleation would be significantly enhanced. Differences in fracture surfaces between the alloys in the T6 and T7 condition were observed and are attributed to inhomogeneous slip distribution, which results in strain localization at grain boundaries. The best overall combination of fracture resistance properties were obtained for alloys with minimum amounts of chromium and manganese additions.

Risk Judgment in Obsessive-Compulsive Disorder: Testing a Dual-Systems Account

Dual-systems theorists posit distinct modes of reasoning. The intuition system reasons automatically and its processes are unavailable to conscious introspection. The deliberation system reasons effortfully while its processes recruit working memory. The current paper extends the application of such theories to the study of Obsessive-Compulsive Disorder (OCD). Patients with OCD often retain insight into their irrationality, implying dissociable systems of thought: intuition produces obsessions and fears that deliberation observes and attempts (vainly) to inhibit. To test the notion that dual-systems theory can adequately describe OCD, we obtained speeded and unspeeded risk judgments from OCD patients and non-anxious controls in order to quantify the differential effects of intuitive and deliberative reasoning. As predicted, patients deemed negative events to be more likely than controls. Patients also took more time in producing judgments than controls. Furthermore, when forced to respond quickly patients' judgments were more affected than controls'. Although patients did attenuate judgments when given additional time, their estimates never reached the levels of controls'. We infer from these data that patients have genuine difficulty inhibiting their intuitive cognitive system. Our dual-systems perspective is compatible with current theories of the disorder. Similar behavioral tests may prove helpful in better understanding related anxiety disorders. (C) 2013 Elsevier Ltd. All rights reserved.

Audience Effects in COgnitive Task Performance in Capuchin Monkeys (Cebus apella)

Primates as a taxonomic Order have the largest brains corrected for body size in the animal kingdom. These large brains have allowed primates to evolve the capacity to demonstrate advanced cognitive processes across a wide array of abilities. Nonhuman primates are particularly adept at social learning, defined as the modification of behavior by observing the actions of others. Additionally, primates often exploit resources differently depending on their social context. In this study, capuchin monkeys (Cebus apella) were tested on a cognitive task in three social contexts to determine if social context influenced their performance on the task. The three social contexts included: alone, having a dominant individual in an adjacent compartment, and having a subordinate individual in the adjacent compartment. The benefits to this design were thatthe social context was the only variable influencing performance, whereas in previous studies investigating audience effects other animals could physically and directly influence a subject's performance in an open testing situation. Based on past studies, Ipredicted that the presence of a dominant individual would reduce cognitive task performance compared to the other conditions. The cognitive test used was a match-tosample discrimination task in which animals matched combinations of eight geometric shapes. Animals were trained on this task in an isolated context until they reached a baseline level of proficiency and were then tested in the three social contexts in a random order multiple times. Two subjects (Mt and Dv) have successfully completed trials under all conditions. Results indicated that there were no significant difference in taskperformance across the three conditions (Dv x^2 (1) = 0.42, p=0.58; Mt x^2 (1) = 0.02, p=0.88). In all conditions, subjects performed significantly above chance (i.e., 39/60 trials determined by a binomial distribution). Results are contrary to previous studies thatreport low status monkeys 'play dumb' when testing in a mixed social context, possibly because other studies did not account for aggressive interference by dominants while testing. Results of this study suggest that the mere presence of a dominant individualdoes not necessarily affect performance on a cognitive task, but rather the imminence of physical aggression is the most important factor influencing testing in a social context.

Development of Measurement Methods for Testing of Hydrokinetic Devices to Evaluate the Environmental Effect on Local Substrate

Modifications and upgrades to the hydraulic flume facility in the Environmental Fluid Mechanics and Hydraulics Laboratory (EFM&H) at Bucknell University are described. These changes enable small-scale testing of model marine hydrokinetic(MHK) devices. The design of the experimental platform provides a controlled environment for testing of model MHK devices to determine their effect on localsubstrate. Specifically, the effects being studied are scour and erosion around a cylindrical support structure and deposition of sediment downstream from the device.

The Effects of Prenatal Exposure to Altered Melatonin Levels on Hippocampal Gene Expression in the Male Rat

The stability of the circadian rhythm for mammals depends on the levels of serotonin and melatonin, neurohormones that signal for lightness and darkness, respectively. Disruption in the stability of neurohormones has been shown to be a critical factor in psychopathological disorders in humans. For example, altering levels of melatonin in utero through administration of melatonin or the melatonin receptor antagonist, luzindole, has been shown to cause changes in developmental growth and adult behavior in the male rat. Analysis of relative adult hippocampal gene expression with RT-PCR revealed differences in ARNTL expression that suggested abnormality in clock gene expression of the rats that were prenatally exposed to altered levels of melatonin. Differences in the degree of plasticity as suggested by previous behavior testing did not result in differences in gene expression for GABA receptors or NMDA receptors. Morevoer, growth associated protein 43, GAP-43, a protein that is necessary for neuronal growth cones as well as long term learning has been found to be critical for axon and presynaptic terminal formation and retention in other studies, but hippocampal gene expression in our study showed no significant alteration after exposure to various maternal melatonin levels. However, ARNTL is a key regulatory component of clock genes and the circadian cycle so that alterations in the expression of thi critical gene may lead to critical changes in neuronal growth and plasticity. Our data support the conclusion that the manipulation of maternal melatonin levels alters the brain development and the circadian cycles that may lead to physiological and behavioral abnormalities in adult offspring.

Effects Of The Flash Welding Process On Mechanical And Microstructural Properties Of Structural Steel Joints Assessed Using Dest

ASTM A529 carbon¿manganese steel angle specimens were joined by flash butt welding and the effects of varying process parameter settings on the resulting welds were investigated. The weld metal and heat affected zones were examined and tested using tensile testing, ultrasonic scanning, Rockwell hardness testing, optical microscopy, and scanning electron microscopy with energy dispersive spectroscopy in order to quantify the effect of process variables on weld quality. Statistical analysis of experimental tensile and ultrasonic scanning data highlighted the sensitivity of weld strength and the presence of weld zone inclusions and interfacial defects to the process factors of upset current, flashing time duration, and upset dimension. Subsequent microstructural analysis revealed various phases within the weld and heat affected zone, including acicular ferrite, Widmanstätten or side-plate ferrite, and grain boundary ferrite. Inspection of the fracture surfaces of multiple tensile specimens, with scanning electron microscopy, displayed evidence of brittle cleavage fracture within the weld zone for certain factor combinations. Test results also indicated that hardness was increased in the weld zone for all specimens, which can be attributed to the extensive deformation of the upset operation. The significance of weld process factor levels on microstructure, fracture characteristics, and weld zone strength was analyzed. The relationships between significant flash welding process variables and weld quality metrics as applied to ASTM A529-Grade 50 steel angle were formalized in empirical process models.