The Crystallization Kinetics of Polylactic Acid (Pla) Processed Through Solid-State/Melt Extrusion

Polylactic acid (PLA) is a bio-derived, biodegradable polymer with a number of similar mechanical properties to commodity plastics like polyethylene (PE) and polyethylene terephthalate (PETE). There has recently been a great interest in using PLA to replace these typical petroleum-derived polymers because of the developing trend to use more sustainable materials and technologies. However, PLA¿s inherent slow crystallization behavior is not compatible with prototypical polymer processing techniques such as molding and extrusion, and in turn inhibits its widespread use in industrial applications. In order to make PLA into a commercially-viable material, there is a need to process the material in such a way that its tendency to form crystals is enhanced. The industry standard for producing PLA products is via twin screw extrusion (TSE), where polymer pellets are fed into a heated extruder, mixed at a temperature above its melting temperature, and molded into a desired shape. A relatively novel processing technique called solid-state shear pulverization (SSSP) processes the polymer in the solid state so that nucleation sites can develop and fast crystallization can occur. SSSP has also been found to enhance the mechanical properties of a material, but its powder output form is undesirable in industry. A new process called solid-state/melt extrusion (SSME), developed at Bucknell University, combines the TSE and SSSP processes in one instrument. This technique has proven to produce moldable polymer products with increased mechanical strength. This thesis first investigated the effects of the TSE, SSSP, and SSME polymer processing techniques on PLA. The study seeks to determine the process that yields products with the most enhanced thermal and mechanical properties. For characterization, percent crystallinity, crystallization half time, storage modulus, softening temperature, degradation temperature and molecular weight were analyzed for all samples. Through these characterization techniques, it was observed that SSME-processed PLA had enhanced properties relative to TSE- and SSSP-processed PLA. Because of the previous findings, an optimization study for SSME-processed PLA was conducted where throughput and screw design were varied. The optimization study determined PLA processed with a low flow rate and a moderate screw design in an SSME process produced a polymer product with the largest increase in thermal properties and a high retention of polymer structure relative to TSE-, SSSP-, and all other SSME-processed PLA. It was concluded that the SSSP part of processing scissions polymer chains, creating defects within the material, while the TSE part of processing allows these defects to be mixed thoroughly throughout the sample. The study showed that a proper SSME setup allows for both the increase in nucleation sites within the polymer and sufficient mixing, which in turn leads to the development of a large amount of crystals in a short period of time.

The Intersection of Economics and Politics in a Small OPEC Country: the Case of Ecuador, 1990 - March 2014

Today, crude oil remains a vital resource all around the world. This non-renewable resource powers countries worldwide. Besides serving as an energy source, crude oil is also the most important component for different world economies, especially in developing countries. Ecuador, a small member of the OPEC oil cartel, presents a case where its economy is oil dependent. A great percentage of the country¿s GDP and government¿s budget comes from oil revenues. Ecuador has always been a primary exporter of raw materials. In the last centuries, the country experienced three important economic booms: cacao, bananas, and, ultimately, crude oil. In this sense, the country has not been able to fully industrialize and begin to export manufactured goods, i.e., Ecuador suffers from the Dutch disease. The latter has deterred Ecuador from achieving broad-based economic development. Given crude oil¿s importance for the Ecuadorian economy, the government has always tried to influence the oil industry in search of profits and benefits. Therefore, this thesis, explores the question: how and to what extent have political interventions affected the oil industry in Ecuador from 1990 until March 2014? In general, this thesis establishes an economic history context during the last twenty-four years, attempting to research how political interventions have shaped Ecuador¿s oil industry and economy. In the analysis, it covers a period where political instability prevailed, until Rafael Correa became president. The thesis examines Ecuador¿s participation in OPEC, trying to find explanations as to why the country voluntarily left the organization in 1992, only to rejoin in 2007 when Correa rose to power. During the ¿Revolución Ciudadana¿ period, the thesis researches reforms to the Law of Hydrocarbons, variations in the relations with other nations, the controversy surrounding the Yasuní-ITT oil block, and the ¿Refinería del Pacífico¿ construction. The thesis is an Industrial Organization detailed case study that analyzes, updates, and evaluates the intersection of economics and politics in Ecuador¿s crude oil industry during the last 24 years. In this sense I have consulted past theses, newspaper articles, books, and other published data about the petroleum industry, both from a global and Ecuadorian perspective. In addition to published sources, I was able to interview sociologists, public figures, history and economics academics, and other experts, accessing unique unpublished data about Ecuador¿s oil industry. I made an effort to collect information that shows the private and public side of the industry, i.e., from government-related and independent sources. I attempted to remain as objective as possible to make conclusions about the appropriate Industrial Organization policy for Ecuador¿s oil industry, addressing the issue from an economic, social, political, and environmental point of view. I found how Ecuador¿s political instability caused public policy to fail, molding the conduct and market structure of the crude oil industry. Throughout history, developed nations have benefited from low oil prices, but things shifted since oil prices began to rise, which is more beneficial for the developing nations that actually possess and produce the raw material. Nevertheless, Ecuador, a victim of the Dutch disease due to its heavy reliance on crude oil as a primary product, has not achieved broad-based development.