Modeling Small Molecule Elution From a Hydrogel using a Microfluidic Technique

Drug release from a fluid-contacting biomaterial is simulated using a microfluidic device with channels defined by solute-loaded hydrogel. In order to mimic a drug delivery device, a solution of poly(ethylene glycol) diacrylate (PEG-DA), solute, and photoinitiator is cured inside a microfluidic device with a channel through the center ofthe hydrogel. As water is pumped through the channel, solute diffuses out of the hydrogel and into the water. Channel sizes within the devices range from 300 µm to 1000 µm to simulate vessels within the body. The properties of the PEG hydrogel were characterizedby the extent of crosslinking, the swelling ratio, and the mesh size of the gel. The structure of the hydrogel was related to the UV exposure dosage and the initial water and solute content in the PEG-DA solution.

A Study of Alumni Engagement and Its Relationship to Giving Behaviors

This paper examines the relationship between alumni engagement and two categories of variables, alumni characteristics and alumni giving behavior. The Valley University engagement score was developed using the entire alumni population and information available from the institutional database. The study found that, with the exception ofgeneration, there was no difference in engagement scores based on alumni characteristics. The study also found that the engagement score has a positive correlation to a variety of giving behaviors, including donor status, recent donor status,annual giving behavior (RFM), and adjusted lifetime giving.

The Effects of Pi-Pi Stacking on the Controlled Radical Polymerization of Vinyl Aromatics

The atom transfer radical polymerization (ATRP) of styrene (St) was conducted in the presence of varying equivalence (eq) of hexafluorobenzene (HFB) and octafluorotoluene (OFT) to probe the effects of pi-pi stacking on the rate of the polymerization and on the tacticity of the resulting polystyrene (PSt). The extent of the pi-pi stacking interaction between HFB/OFT and the terminal polystyrenic phenyl group was also investigated as a function of solvent, both non-aromatic solvents (THF and hexanes) and aromatic solvents (benzene and toluene). In all cases the presence of HFB or OFT resulted in a decrease in monomer conversion indicating a reduction in the rate of the polymerization with greater retardation of the rate with increase eq of HFB or OFT (0.5 eq to 1 eq HFB/OFT compared to St). Additionally, when aromatic solvents were used instead of non-aromatic solvents the effect of the HFB/OFT on the rate was minimized, consistent with the aromatic solvent competitively interacting with the HFB/OFT. The effects of temperature and ligand strength on the ATRP of St in the presence of HFB were also probed. It was found that when using N,N,N’,N’,N’’-pentamethyldiethylenetriamine (PMDETA) as the ligand the effects of HFB at 38o were the same as at 86oC. When tris[2-(dimethylamino)ethyl]-amine (Me6TREN) was used as the ligand at 38o there was a decrease in monomer conversion similar to the analogous PMDETA reaction. When the polymerization was conducted at 86oC there was no effect on the monomer conversion with HFB present compared to when HFB was absent. To investigate the pi-pi stacking effect even further, the reverse pi-pi stacking system was observed by conducting the ATRP of pentafluorostyrene (PFSt) in the presence of varying eq of benzene and toluene, which in both cases resulted in an increase in monomer conversion compared to when benzene or toluene were absent; in summary the rate of the ATRP of PFSt increases when benzene or toluene waas present in the reaction. The pi-pi stacking interaction between the HFB/OFT and the dormant alkyl bromide of the polymer chain was verified by 1H-NMR with 1-bromoethylbenzene as the alkyl bromide. Also verified by 1H-NMR was the interaction between HFB/OFT and St and the interaction between PFSt and benzene. In all 1H-NMR spectra a perturbation in the aromatic and/or vinyl peaks was observed when the pi-pi stacking agent was present compared to when it was absent. The tacticity of the PSt formed in the presence of 1 eq of HFB was compared to the PSt formed in the absence of HFB by observing the C1 signal in their 13C-NMR spectra, but no change in shape or chemical shift of the signal was observed indicating that there was no change in tacticity.

Continuous Formation and Separation of Calcium-Alginate Capsules Containing Viable Mammalian Cells in Microfluidic Devices

Microfluidic devices can be used for many applications, including the formation of well-controlled emulsions. In this study, the capability to continuously create monodisperse droplets in a microfluidic device was used to form calcium-alginate capsules.Calcium-alginate capsules have many potential uses, such as immunoisolation of cells and microencapsulation of active drug ingredients or bitter agents in food or beverage products. The gelation of calcium-alginate capsules is achieved by crosslinking sodiumalginate with calcium ions. Calcium ions dissociated from calcium carbonate due to diffusion of acetic acid from a sunflower oil phase into an aqueous droplet containing sodium-alginate and calcium carbonate. After gelation, the capsules were separated from the continuous oil phase into an aqueous solution for use in biological applications. Typically, capsules are separated bycentrifugation, which can damage both the capsules and the encapsulated material. A passive method achieves separation without exposing the encapsulated material or the capsules to large mechanical forces, thereby preventing damage. To achieve passiveseparation, the use of a microfluidic device with opposing channel wa hydrophobicity was used to stabilize co-laminar flow of im of hydrophobicity is accomplished by defining one length of the channel with a hydrogel. The chosen hydrogel was poly (ethylene glycol) diacrylate, which adheres to the glass surface through the use of self-assembled monolayer of 3-(trichlorosilyl)-propyl methacrylate. Due to the difference in surface energy within the channel, the aqueous stream is stabilized near a hydrogel and the oil stream is stabilized near the thiolene based optical adhesive defining the opposing length of the channel. Passive separation with co-laminar flow has shown success in continuously separating calcium-alginatecapsules from an oil phase into an aqueous phase. In addition to successful formation and separation of calcium alginate capsules,encapsulation of Latex micro-beads and viable mammalian cells has been achieved. The viability of encapsulated mammalian cells was determined using a live/dead stain. The co-laminar flow device has also been demonstrated as a means of separating liquid-liquidemulsions.

Perceptions of Social Mobility in Community College Scholars at Bucknell University

While national leaders have joined the discussion more recently, scholars in the fields of education, psychology, and sociology, have been exploring the ways in which students? socioeconomic background affects the outcomes they experience as a result of their education (Lareau, Unequal Childhoods: Class, Race, and Family Life, 2003).Furthermore, the role played by the education system in creating or diminishing socioeconomic disparity has also been studied in depth (Bourdieu, 1977; Boudon, 1977). However, the journeys of students from low-income families that begin their education at community colleges and continue it, through careful planning or chance, at elite four-year institutions, has not been the subject of much attention. This thesis explores these students? perceptions of social mobility as they have been shaped by their experiences so far in life. This includes the exploration of changes in their perceptions as the contexts for their lives have been changed. Quantitative analysis of survey results and qualitative analysis of participant interviews serve as the data set for this study. The implications ofthe findings for student affairs practitioners are also explored.

The Effects of Apomorphine on Sexual Behavior and Aggression in Male Golden Hamsters

The general dopamine agonist apomorphine has been shown to have mostly facilitative effects on sexual behavior in rodents (Domingues & Hull, 2005; Bitran & Hull, 1987). A study looking at the effectsof apomorphine on sexual behavior in male golden hamsters observed that after systemic injections of apomorphine the males became aggressive towards the estrous females (Floody, unpublished). Studies on aggressive behavior have shown that apomorphine has facilitative effects on aggression in rodents (Nelson & Trainor, 2007; van Erp & Miczek, 2000; Ferrari, van Erp, Tornatzky, & Miczek, 2003). The studies presented here attempt to unravel the effects that apomorphine has on sexual and aggressive behavior in male golden hamsters. Studies 1, 2, 3, and 4 focused on the effects of apomorphine on aggression and Study 5 focused on the effects of apomorphine on sexual behavior. It was important for the purposes ofthis study to have separate, specific measures of aggression and sexual behavior that did not involve a social context that would involve multiple behaviors and motivations. The measure used to assessaggression was flank marking behavior. The measure used to assess sexual behavior was the number of vocalizations in response to sexual stimuli. The results from Studies 1, 2, and 3 suggested thatapomorphine increased aggressive motivation in a dose-dependent manner. In Studies 1 and 2 there was a high occurrence of stereotyped cheek pouching that interfered with the flank marking behavior. In Study 3 the procedure was modified to prevent cheek pouching and flank marking was observed uninhibited. Study 5 suggested a decrease in vocalizations after apomorphine treatment. However, this decrease may have been a result of the increase in stereotyped licking behavior. Results suggested that systemic apomorphine treatments increase aggressive motivation in hamsters. The increase in aggressive motivation may confuse the perception of the sensory signals that the males receive from the estrous females. They may haveperceived the estrous female as a nonestrous female which they would normally associate with an aggressive interaction (Lehman, Powers, & Winans, 1983).

THE RELATIONSHIP BETWEEN PARENTING STYLES, LEARNING AUTONOMY, AND SCHOLASTIC ACHIEVEMENT IN UNDERGRADUATE COLLEGE STUDENTS

Throughout the years, the role that parents play with regard to a child’s academic achievement has been the source of considerable research. The type of parenting style employed by parents, whether it is authoritarian, authoritative, or permissive, has and continues to be a major theme in these studies. One area of particular interest that has been overlooked in these studies, however, is the influence that parents may have on a student’s learning autonomy. Learning autonomy is the idea that a student has internal motivation to learn or achieve. The purpose of this study was to investigate therelationship among the three styles of parenting, learning autonomy, perceived parental autonomy support, and scholastic achievement in undergraduate college students. Sixty-one participants were recruited at a small liberal arts college in the northeastern United States to complete questionnaires, which measured perceived parental authority of the participants’ parents, perceived parental autonomy support, and students’ own learning autonomy. The participants were also asked to list their grade point average. The results revealed positive and negative correlations between many of the variables in the study;however, simple regression analyses did not yield any statistically significant relationships between parental authority, learning autonomy, perceived autonomy support, and scholastic achievement.

Solid-State Compatibilization of Immiscible Polymer Blends: Cryogenic Milling and Solid-State Shear Pulverization

The blending of common polymers allows for the rapid and facile synthesis of new materials with highly tunable properties at a fraction of the costs of new monomer development and synthesis. Most blends of polymers, however, are completely immiscible and separate into distinct phases with minimal phase interaction, severelydegrading the performance of the material. Cross-phase interactions and property enhancement can be achieved with these blends through reactive processing or compatibilizer addition. A new class of blend compatibilization relies on the mechanochemical reactions between polymer chains via solid-state, high energy processing. Two contrasting mechanochemical processing techniques are explored in this thesis: cryogenic milling and solid-state shear pulverization (SSSP). Cryogenic milling is a batch process where a milling rod rapidly impacts the blend sample while submerged within a bath of liquid nitrogen. In contrast, SSSP is a continuous process where blend components are subjected to high shear and compressive forces while progressing down a chilled twin-screw barrel. In the cryogenic milling study, through the application of a synthesized labeledpolymer, in situ formation of copolymers was observed for the first time. The microstructures of polystyrene/high-density polyethylene (PS/HDPE) blends fabricated via cryomilling followed by intimate melt-state mixing and static annealing were found to be morphologically stable over time. PS/HDPE blends fabricated via SSSP also showed compatibilization by way of ideal blend morphology through growth mechanisms with slightly different behavior compared to the cryomilled blends. The new Bucknell University SSSP instrument was carefully analyzed and optimized to produce compatibilized polymer blends through a full-factorial experiment. Finally, blends of varying levels of compatibilization were subjected to common material tests to determine alternative means of measuring and quantifying compatibilization,

Chemical compatibility of soil-bentonite cutoff wall backfills containing modified bentonites

This study examined the chemical compatibility of several model soil-bentonite(SB) backfills with an inorganic salt solution (CaCl2). First, bentonite-water slurry was created using a natural sodium-bentonite, as well as two modified bentonites –multiswellable bentonite (MSB) and a “salt-resistant” bentonite (SW101). Once slurries that met typical construction specifications had been created using the various bentonites,the model SB backfills were prepared for each type of bentonite. These backfills werealso designed to meet conventional construction and design requirements. The SB backfills were then subjected to permeation with tap water and/or CaCl2 solutions of various concentrations in order to evaluate the compatibility of the SB backfills with inorganic chemicals. The results indicate that SB backfill experiences only minor compatibility issues (i.e., no large differences between the hydraulic conductivity of the SB backfill to tap water and CaCl2) compared to many other types of clay barriers. In addition, SB backfills show no major change in final hydraulic conductivity to CaCl2 when permeated with tap water before CaCl2 versus being permeated with CaCl2 directly. These results may be due to the ability of the bentonite in the SB backfills to undergo osmotic swelling before permeation begins, and the inability of the CaCl2 solutions to undo the osmotic swelling. Similar results were obtained for all three clays tested, and while MSB did show less compatibility issues than the natural bentonite and SW101, it appears that the differences in performance may generally be negligible. Overall, thisstudy makes a significant addition to the understanding of SB cutoff wall compatibility.

A study of high solids anaerobic digestion of Bucknell University food waste followed by aerobic curing

Anaerobic digestion of food scraps has the potential to accomplish waste minimization, energy production, and compost or humus production. At Bucknell University, removal of food scraps from the waste stream could reduce municipal solid waste transportation costs and landfill tipping fees, and provide methane and humus for use on campus. To determine the suitability of food waste produced at Bucknell for high-solids anaerobic digestion (HSAD), a year-long characterization study was conducted. Physical and chemical properties, waste biodegradability, and annual production of biodegradable waste were assessed. Bucknell University food and landscape waste was digested at pilot-scale for over a year to test performance at low and high loading rates, ease of operation at 20% solids, benefits of codigestion of food and landscape waste, and toprovide digestate for studies to assess the curing needs of HSAD digestate. A laboratory-scale curing study was conducted to assess the curing duration required to reduce microbial activity, phytotoxicity, and odors to acceptable levels for subsequent use ofhumus. The characteristics of Bucknell University food and landscape waste were tested approximately weekly for one year, to determine chemical oxygen demand (COD), total solids (TS), volatile solids (VS), and biodegradability (from batch digestion studies). Fats, oil, and grease and total Kjeldahl nitrogen were also tested for some food waste samples. Based on the characterization and biodegradability studies, Bucknell University dining hall food waste is a good candidate for HSAD. During batch digestion studies Bucknell University food waste produced a mean of 288 mL CH4/g COD with a 95%confidence interval of 0.06 mL CH4/g COD. The addition of landscape waste for digestion increased methane production from both food and landscape waste; however, because the landscape waste biodegradability was extremely low the increase was small.Based on an informal waste audit, Bucknell could collect up to 100 tons of food waste from dining facilities each year. The pilot-scale high-solids anaerobic digestion study confirmed that digestion ofBucknell University food waste combined with landscape waste at a low organic loading rate (OLR) of 2 g COD/L reactor volume-day is feasible. During low OLR operation, stable reactor performance was demonstrated through monitoring of biogas production and composition, reactor total and volatile solids, total and soluble chemical oxygendemand, volatile fatty acid content, pH, and bicarbonate alkalinity. Low OLR HSAD of Bucknell University food waste and landscape waste combined produced 232 L CH4/kg COD and 229 L CH4/kg VS. When OLR was increased to high loading (15 g COD/L reactor volume-day) to assess maximum loading conditions, reactor performance became unstable due to ammonia accumulation and subsequent inhibition. The methaneproduction per unit COD also decreased (to 211 L CH4/kg COD fed), although methane production per unit VS increased (to 272 L CH4/kg VS fed). The degree of ammonia inhibition was investigated through respirometry in which reactor digestate was diluted and exposed to varying concentrations of ammonia. Treatments with low ammoniaconcentrations recovered quickly from ammonia inhibition within the reactor. The post-digestion curing process was studied at laboratory-scale, to provide a preliminary assessment of curing duration. Digestate was mixed with woodchips and incubated in an insulated container at 35 °C to simulate full-scale curing self-heatingconditions. Degree of digestate stabilization was determined through oxygen uptake rates, percent O2, temperature, volatile solids, and Solvita Maturity Index. Phytotoxicity was determined through observation of volatile fatty acid and ammonia concentrations.Stabilization of organics and elimination of phytotoxic compounds (after 10–15 days of curing) preceded significant reductions of volatile sulfur compounds (hydrogen sulfide, methanethiol, and dimethyl sulfide) after 15–20 days of curing. Bucknell University food waste has high biodegradability and is suitable for high-solids anaerobic digestion; however, it has a low C:N ratio which can result in ammonia accumulation under some operating conditions. The low biodegradability of Bucknell University landscape waste limits the amount of bioavailable carbon that it can contribute, making it unsuitable for use as a cosubstrate to increase the C:N ratio of food waste. Additional research is indicated to determine other cosubstrates with higher biodegradabilities that may allow successful HSAD of Bucknell University food waste at high OLRs. Some cosubstrates to investigate are office paper, field residues, or grease trap waste. A brief curing period of less than 3 weeks was sufficient to produce viable humus from digestate produced by low OLR HSAD of food and landscape waste.

Hibernacula Microclimate and White-nose Syndrome Susceptibility in the Little Brown Myotis (Myotis lucifugus)

The objective of this project was to determine the relationship between hibernacula microclimate and White-nose Syndrome (WNS), an emerging infectious disease in bats. Microclimate was examined on a species scale and at the level of the individual bat to determine if there was a difference in microclimate preference between healthy and WNS-affected little brown myotis (Myotis lucifugus) and to determine the role of microclimate in disease progression. There is anecdotal evidence that colder, drier hibernacula are less affected by WNS. This was tested by placing rugged temperature and humidity dataloggers in field sites throughout the eastern USA, experimentally determining the response to microclimate differences in captive bats, and testing microclimate roosting preference. This study found that microclimate significantly differed from the entrance of a hibernaculum versus where bats traditionally roost. It also found hibernaculum temperature and sex had significant impacts on survival in WNS-affected bats. Male bats with WNS had increased survivability over WNS-affected female bats and WNS bats housed below the ideal growth range of the fungus that causes WNS, Geomyces destructans, had increased survival over those housed at warmer temperatures. The results from this study are immediately applicable to (1) predict which hibernacula are more likely to be infected next winter, (2) further our understanding of WNS, and (3) determine if direct mitigation strategies, such as altering the microclimate of mines, will be effective ways to combat the spread of the fungus.

Investigation of the Hygroscopic and Morphological Properties of Atmospheric Aerosols

The first objective of this thesis was to examine the hygroscopic and morphological nature of various substances through the use of an Environmental Scanning Electron Microscope (ESEM). The hygroscopic growth and changes in morphology for pure-component aerosols were studied for particles greater than 2 µm in size. Hygroscopic growth was observed through changes in relative humidity (RH) and hygroscopic growth curves were created. The second objective of this thesis, the hygroscopic growth of multi-component aerosol mixtures, was studied using Hygroscopic Tandem Differential Mobility Analysis(HTDMA). The size distribution for an aerosol stream was determined before and after the stream was subjected to an increase in relative humidity.

The Clearing Storm: A Re-Assessment of the Climate for Collaboration between Academic and Student Affairs

There is increasing recognition among those in higher education that it is no longer adequate to train students in a specific field or industry. Instead, the push is more towards producing well-rounded students. In order to do so, all of a university’s resources must come together and the climate on campus must be one that supportscollaboration. This report is a re-examination of the climate for collaboration on the campus of a private liberal arts university in the Mid-Atlantic region of the United States. It is a follow up to a similar investigation conducted on the same campus by Victor Arcelus(2008) five years earlier. In the interim, the university had re-configured its organizational structure, combining separate academic and student affairs divisions into a single unit overseen by the Provost. Additionally, the university had experienced turnover in several key leadership positions, including those of the President and the chief academic and student affairs officers. The purpose of this investigation, therefore, was to gauge the immediate impact of these changes on conditions for collaboration, which when present, advance student learning and development. Through interviews with six men and women, information was collected on the perceived climate for collaboration between academic and student affairs personnel.Analysis of the interview transcripts revealed that, depending on the position of the interviewee within the university, conditions on campus were seen as either improved or largely unchanged as a result of the transition in leadership and the structural merger of the two divisions.

Continuous, Passive Liquid-Liquid Extraction and Emulsion Separation Within Microfluidic and Millifluidic Devices

Liquid-liquid extraction (LLE) is a method used to separate compounds based on their relative activity in two immiscible phases. By significantly reducing the scale of liquid-liquid extraction to the micro- and milli-fluidic levels, this separation process can bemade suitable for low volume, high value materials.