Revision of a Liquid Fuel Airblast Atomizer and Installation of a Laser Extinction System for Measurement of Soot Produced During Liquid Fuel Combustion

Studying liquid fuel combustion is necessary to better design combustion systems. Through more efficient combustors and alternative fuels, it is possible to reduce greenhouse gases and harmful emissions. In particular, coal-derived and Fischer-Tropsch liquid fuels are of interest because, in addition to producing fewer emissions, they have the potential to drastically reduce the United States' dependence on foreign oil. Major academic research institutions like the Pennsylvania State University perform cutting-edge research in many areas of combustion. The Combustion Research Laboratory (CRL) at Bucknell University is striving to develop the necessary equipment to be capable of both independent and collaborative research efforts with Penn State and in the process, advance the CRL to the forefront of combustion studies. The focus of this thesis is to advance the capabilities of the Combustion Research Lab at Bucknell. Specifically, this was accomplished through a revision to a previously designed liquid fuel injector, and through the design and installation of a laser extinction system for the measurement of soot produced during combustion. The previous liquid fuel injector with a 0.005" hole did not behave as expected. Through spray testing the 0.005" injector with water, it was determined that experimental errors were made in the original pressure testing of the injector. Using data from the spray testing experiment, new theoretical hole sizes of the injector were calculated. New injectors with 0.007" and 0.0085" orifices were fabricated and subsequently tested to qualitatively validate their behavior. The injectors were installed in the combustion rig in the CRL and hot-fire tested with liquid heptane. The 0.0085" injector yielded a manageable fuel pressure and produced a broad flame. A laser extinction system was designed and installed in the CRL. This involved the fabrication of a number of custom-designed parts and the specification of laser extinction equipment for purchase. A standard operating procedure for the laser extinction system was developed to provide a consistent, safe method for measuring soot formation during combustion.

Life on the Edge: Patterns of Formal and Informal Help to Older Adults in the United States and Sweden

Objectives Our objective in this study was to compare assistance received by individuals in the United States and Sweden with characteristics associated with low, moderate, or high 1-year placement risk in the United States. Methods We used longitudinal nationally representative data from 4,579 participants aged 75 years and older in the 1992 and 1993 waves of the Medicare Current Beneficiary Survey (MCBS) and cross-sectional data from 1,379 individuals aged 75 years and older in the Swedish Aging at Home (AH) national survey for comparative purposes. We developed a logistic regression equation using U.S. data to identify individuals with 3 levels (low, moderate, or high) of predicted 1-year institutional placement risk. Groups with the same characteristics were identified in the Swedish sample and compared on formal and informal assistance received. Results Formal service utilization was higher in Swedish sample, whereas informal service use is lower overall. Individuals with characteristics associated with high placement risk received more formal and less informal assistance in Sweden relative to the United States. Discussion Differences suggest formal services supplement informal support in the United States and that formal and informal services are complementary in Sweden.