Synthesis Of Linoleate Analogs With Longer Alkyl Termini To Test For Proposed "Tail-First" Binding In SBLO-1

Lipoxygenases are nonheme-iron proteins that catalyze the oxygenation of polyunsaturated fatty acids to give conjugated diene hydroperoxides. For example, soybean lipoxygenase-1 (SBLO-1) converts linoleate into 13-(S)-hydroperoxy-9(Z),11(E)-octadecadienoate (13(S)-HPOD). Although the crystal structure of SBLO-1 has been determined, it is still unclear how the substrate binds at the active site. This absence of knowledge makes it difficult to understand the role of the enzyme during catalysis of the reaction. We hypothesize that SBLO-1 binds linoleate ¿tail-first¿, so that the methyl terminus is within a hydrophobic pocket deep within the enzyme. It is believed that the hydrophobic residue phenylalanine-557 at this site has stabilizing interactions with the terminal methyl group on linoleate. To test this hypothesis, we have developed a synthetic pathway that will yield linoleate analogs with longer fatty acid chains by 1 and 2 more carbons at the alkyl terminus. These substrates will be analyzed through kinetic assays done in combination with wild type SBLO-1 and mutants in which we have replaced phenylalanine-557 with valine.

An Investigation On The Use Of Microalgae For Biogas Enrichment

There is a need for biomethane capture and carbon dioxide sequestration to mitigate evident global climate change. This research work investigated the potential for microalgae to remove CO2 from biogas as a biotechnical method for upgrading the thermal value for subsequent compression, liquification, or introduction to natural gas pipelines. Because biogas is largely methane, the effect of high methane environments on mixed microalgae was explored and found that specific carbon utilization rates were not statistically different when microalgae were exposed to biogas environments (70% v/v CH4) , relative to high CO2 environment. The uses of conventional bubbled column photobioreactors (PBR) were assessed for CO2 removal and subsequent CH4 enrichment. A continuously-bubbled biogas PBR (cB-PBR5) and intermittently-bubbled biogas PBR (iB-PBR) experienced CO2 loading rates of about 1664 and 832 mg C/L*day and showed 30.0 and 60.1 % carbon removal, respectively. However, a lack of biogas enrichment and issues associated growth inhibition due to high CO2 environments as well as stripping the dissolved gases, namely oxygen and nitrogen, from the bulk liquid and introduction to the outlet gas prompted the consideration for gas/liquid separation using nonporous hollow-fiber (HF) membranes for CO2 transfer. The potential for two non-porous HF membrane materials [polydimethylsiloxane (PDMS) and composite polyurethane (PU)] were modeled along fiber length using a mechanistic model based on polymeric material transport properties (Gilmore et al., 2009). Based on a high CO2:CH4 permeability selectivity for PU of 76.2 the model predicted gas enrichment along an 8.5 cm fiber length. Because PDMS permeability selectivity is low (3.5), evident gas transfer was not predicated along a 34.3 cm length. Both of these HF materials were implemented in hollow-fiber membrane-carbonated biofilm (HFMcB) PBRs for microalgal-mediated biogas enrichment. Phototrophic biofilm colonization occurred on the membrane, where CO2 concentration was greatest. The presence of a biofilm demonstrated greater resiliency to high CO2 environments, compared to the conventional PBRs. However, as the PDMS model predicted, the PDMS HFMcBs did not demonstrate gas enrichment. These reactors received CO2 loading rates of 200 mg C/L*day based on PDMS permeability flux and showed approximately 65% removal of the total C transferred across the membrane. Thus, the HFMcBs demonstrated controlled carbonation of the bulk liquid via a nonporous HF membrane. Likewise, the experimental PU HFMcB did not show gas enrichment yet this result should be further explored due to the high permeability selectivity of the polymeric material. Chemical stratifications, namely pH and dissolved O2, present in a PDMS membrane-carbonated biofilm were analyzed using electrochemical microsensors. Results indicated that high DO (20 mg L-1) exists at surface of the biofilm where light availability is greatest and low pH microenvironments (pH=5.40) exist deep in the biofilm where the diffusive flux of CO2 drives transfer through the biofilm. The presence of a 400-600 ¿m liquid phase boundary layer was evident from microsensor profiles. Cryosectioning of the biofilm samples showed the biofilm to be approximately 1.17 ± 0.07 mm thick, suggesting that the high localized concentration of biomass associated with the phototrophic biofilm aided in overcoming inhibition in a microenvironment dominated by CO2(aq). Challenges of biofilm detachment and PBR fouling as well as microalgal growth inhibition in the presence of high CO2 content remain for applications of microalgae for biogas enrichment.

Mother-Child Spiritual Discourse: A Mixed Methods Study

Parents and children, starting at very young ages, discuss religious and spiritual issues¿where we come from, what happens to us after we die, is there a God, and so on. Unfortunately, few studies have analyzed the content and structure of parent-child conversation about religion and spirituality (Boyatzis & Janicki, 2003; Dollahite & Thatcher, 2009), and most studies have relied on self-report with no direct observation. The current study examined mother-child (M-C) spiritual discourse to learn about its content, structure, and frequency through a survey inventory in combination with direct video observation using a novel structured task. We also analyzed how mothers¿ religiosity along several major dimensions related to their communication behaviors within both methods. Mothers (N = 39, M age = 40) of children aged 3-12 completed a survey packet on M-C spiritual discourse and standard measures of mothers¿ religious fundamentalism, intrinsic religiosity, sanctification of parenting (how much the mother saw herself as doing God¿s work as a parent), and a new measure of parental openness to children¿s spirituality. Then, in a structured task in our lab, mothers (N = 33) and children (M age = 7.33) watched a short film or read a short book that explored death in an age-appropriate manner and then engaged in a videotaped conversation about the movie or book and their religious or spiritual beliefs. Frequency of M-C spiritual discourse was positively related to mothers¿ religious fundamentalism (r = .71, p = .00), intrinsic religiosity (r = .77, p = .00), and sanctification of parenting (r = .79, p = .00), but, surprisingly, was inversely related to mothers¿ v openness to child¿s spirituality (r = -.52, p = .00). Survey data showed that the two most common topics discussed were God (once a week) and religion as it relates to moral issues (once a week). According to mothers their children¿s most common method of initiating spiritual discourse was to repeat what he or she has heard parents or family say about religious issues (M = 2.97; once a week); mothers¿ most common method was to describe their own religious/spiritual beliefs (M = 2.92). Spiritual discourse most commonly occurred either at bedtime or mealtime as reported by 26% of mothers, with the most common triggers reported as daily routine/random thoughts (once a week) and observations of nature (once a week). Mothers¿ most important goals for spiritual discourse were to let their children know that they love them (M = 3.72; very important) and to help them become a good and moral person (M = 3.67; very important). A regression model showed that significant variance in frequency of mother-child spiritual discourse (R2 = .84, p = .00) was predicted by the mothers¿ importance of goals during discourse (ß = 0.46, p = .00), frequency that the mother¿s spirituality was deepened through spiritual discourse (ß = 0.39, p = .00), and the mother¿s fundamentalism (ß = 0.20, p = .05). In a separate regression, the mother¿s comfort in the structured task (ß = 0.70, p = .00), and the number of open-ended questions she asked (ß = -0.26, p = .03) predicted the reciprocity between mother and child (R2 = .62, p = .00). In addition, the mother¿s age (ß = 0.22, p = .059) and comfort during the task (ß = 0.73, p = .00) predicted the child¿s engagement within the structured task. Other findings and theoretical and methodological implications will be discussed.

Product Distributions Following Hyperthermal Collisions Between C2H4 And O(3P)

Transient Diode Laser Absorption Spectroscopy (TDLAS) was used to perform vibrational state population studies of the CO2 product from the hyperthermal reaction between C2H4 and O(3P) at room temperature using O3 as the O-atom precursor. Photodissociation of O3 using a frequency quadrupled Q-switch Nd:YAG laser pulse at 266 nm produced O(3P) atoms at high velocities which subsequently reacted with C2H4, producing several primary and secondary products including CO2. The CO2 product was detected using high-resolution TDLAS under five unique sets of reaction conditions. The vibrational distribution of the CO2 product did not follow a Boltzmann distribution at all five sets of conditions. The experiments showed a distribution in which there was a surprisingly high population in the (1000) (symmetric stretching) state compared with the other states probed, all of which contained bend excitation. In general, the CO2 population in the (1000) state was about 15-20% more populated than the Boltzmann distribution predicts. A possible explanation for this result may lie in the mechanism of CO2 evolution from the C2H4 + O(3P) reaction.

Investigating The Fate Of Positively Charged Nanoparticles In A Soil Environment

The recent increase in the amount of nanoparticles incorporated into commercial products is accompanied by a rising concern of the fate of these nanoparticles. Once released into the environment, it is inevitable that the nanoparticles will come into contact with the soil, introducing them to various routes of environmental contamination. One route that was explored in this research was the interaction between nanoparticles and clay minerals. In order to better define the interactions between clay minerals and positively charged nanoparticles, in situ atomic force microscopy (AFM) was utilized. In situ AFM experiments allowed interactions between clay minerals and positively charged nanoparticles to be observed in real time. The preliminary results demonstrated that in situ AFM was a reliable technique for studying the interactions between clay minerals and positively charged nanoparticles and showed that the nanoparticles affected the swelling (height) of the clay quasi-crystals upon exposure. The preliminary AFM data were complemented by batch study experiments which measured the absorbance of the nanoparticle filtrate after introduction to clay minerals in an effort to better determine the mobility of the positively charged nanoparticles in an environment with significant clay contribution. The results of the batch study indicated that the interactions between clay minerals and positively charged nanoparticles were size dependent and that the interactions of the different size nanoparticles with the clay may be occurring to different degrees. The degree to which the different size nanoparticles were interacting with the clay was further probed using FTIR (Fourier transform infrared) spectroscopy experiments. The results of these experiments showed that interactions between clay minerals and positively charged nanoparticles were size dependent as indicated by a change in the FTIR spectra of the nanoparticles upon introduction to clay.

Quantifying The Diffusion And Erosion Of Degradable Hydrogels Using A Microfluidic Technique

Hydrogels are composed of cross-linked networks of hydrophilic polymers that are biocompatible due to their high water content. Mass transfer through hydrogels has been suggested as an effective method of drug delivery, specifically in degradable polymers to minimize lasting effects within the body. Diffusion of small molecules in poly (ethylene glycol) diacrylate (PEG-DA) and dextran methacrylate (dex-MA) hydrogels was characterized in a microfluidic device and by complementary techniques. Microfluidic devices were prepared by crosslinking a formulation of hydrogel and photo-initiator, with and without visible dye, using photolithography to define a central microchannel. Channel sizes within the devices were approximately 600 ¿m to simulate vessels within the body. The microfluidic technique allows for both image and effluent analyses. To visualize the diffusive behavior within the dextran hydrogel, methylene blue and sulforhodamine 101 dyes were used in both elution and uptake experiments. Three analysis techniques for measuring diffusion coefficients were used to quantify the diffusion of solute in the hydrogel, including optical microscopy, characterization of device effluent, and NMR analyses. The optical microscopy technique analyzes images of the dye diffusion captured by a stereomicroscope to generate dye concentration v. position profiles. The data was fit to a diffusion model to determine diffusion coefficients and the dye release profile. In a typical elution experiment, aqueous solution is pumped through the microchannel and dye diffuses out of the hydrogel and into the aqueous phase. During elution, images are taken at regular time intervals and the effluent was collected. Analysis of the device effluent was performed using ultraviolet-visible (UV/Vis) spectroscopy to determine the effluent dye concentration and thus a short-time diffusion coefficient. Nuclear magnetic resonance (NMR) was used to determine a free diffusion coefficient of molecules in hydrogel without the effect of a concentration gradient. Diffusion coefficients for methylene blue and sulforhodamine 101 dyes in dex-MA hydrogel calculated using the three analysis methods all agree well. It was determined that utilizing a combination of the three techniques offers greater insight into molecular diffusion in hydrogels than employing each technique individually. The use of the same microfluidic devices used to measure diffusion is explored in the use of studying the degradation of dex-MA hydrogels. By combining what is known about the degradation rate in regards to the effect of pH and crosslinking and the ability to use a dye solution in contrast to establish the hydrogel boundaries could be a novel approach to studying hydrogel degradation.

Use Of Conspecific Gestural Cues To Solve An Object-Choice Task In Tufted Capuchin Monkeys (Cebus Apella)

Capuchin monkeys, Cebus sp., utilize a wide array of gestural displays in the wild, including facial displays such as lip-smacking and bare-teeth displays. In captivity, they have been shown to respond to the head orientation of humans, show sensitivity to human attentional states, as well as follow human gazes behind barriers. In this study, I investigated whether tufted capuchin monkeys (Cebus apella) would attend to and utilize the gestural cues of a conspecific to obtain a hidden reward. Two capuchins faced each other in separate compartments of an apparatus with an open field in between. The open field contained two cups with holes on one side such that only one monkey, a so-called cuing monkey, could see the reward inside one of the cups. I then moved the cups toward the other signal-receiving monkey and assessed whether it would utilize untrained cues provided by the cuing monkey to select the cup containing the reward. Two of four female capuchin monkeys learned to select the cup containing the reward significantly more often than chance. Neither of these two monkeys performed over chance spontaneously, however, and the other two monkeys never performed above chance despite many blocks of trials. Successful choices by two monkeys to obtain hidden rewards provided experimental evidence that capuchin monkeys attend to and utilize the gestural cues of conspecifics.

The Behavior Rating Inventory Of Executive Function - Self-Report Version (Brief-Sr) And The Delis-Kaplan Executive Function Sys

The assessment of executive functions is an area of study that has seen considerable development in recent years. Despite much research examining the validity of various measures of executive functions from both a direct and indirect format, little evidence exists in the extant literature evaluating the correspondence between these types of measures. The current study examined the extent of correspondence, comprising concurrent validity, between the Delis-Kaplan Executive Function System (D-KEFS) and the Behavior Rating Inventory of Executive Function ¿ Self-Report Version (BRIEF-SR). Participants included 30 undergraduate and high school students 18 years of age. Results indicated mixed evidence of concurrent validity between the two measures of executive functions. The findings obtained suggest both expected significant, negative correlation as well as lack of expected correlation between the measures. Suggestions for future research in the assessment of executive functions are discussed.

Collision-Induced Dissociation Of Dipeptides In Negative Ion Electrospray Ionization Tandem Mass Spectrometry

This purpose of this project was to investigate the collision-induced dissociation of dipeptides in negative ion electrospray ionization tandem mass spectrometry, with a focus on the mechanism of the production of imidazole-type fragments not previously reported from the fragmentation of the dipeptides being studied. The majority of the dipeptides studied were alanine N-terminal or serine C-terminal dipeptides. All dipeptides were dissolved in 50:50 methanol:water, 3 mM ammonium formate. Collision-induced dissociation in the collision cell of a triple quadrupole mass spectrometer was used to fragment [M-H]- precursor ions. Accurate mass measurements confirmed the molecular formula of the imidazole-type fragments. Further MS/MS studies were performed to provide information about the fragmentation mechanism for the formation of the imidazole-type fragments. The m/z values of intermediate ions in the formation of the imidazole-type fragments were confirmed through second-generation product ion scans and precursor ion scans. More sophisticated instrumentation will be required to further probe the structure of the intermediate ions.

Effective Length K-Factors For Flexural Buckling Strengths Of Web Members In Open Web Steel Joists

Open web steel joists are designed in the United States following the governing specification published by the Steel Joist Institute. For compression members in joists, this specification employs an effective length factor, or K-factor, in confirming their adequacy. In most cases, these K-factors have been conservatively assumed equal to 1.0 for compression web members, regardless of the fact that intuition and limited experimental work indicate that smaller values could be justified. Given that smaller K-factors could result in more economical designs without a loss in safety, the research presented in this thesis aims to suggest procedures for obtaining more rational values. Three different methods for computing in-plane and out-of-plane K-factors are investigated, including (1) a hand calculation method based on the use of alignment charts, (2) computational critical load (eigenvalue) analyses using uniformly distributed loads, and (3) computational analyses using a compressive strain approach. The latter method is novel and allows for computing the individual buckling load of a specific member within a system, such as a joist. Four different joist configurations are investigated, including an 18K3, 28K10, and two variations of a 32LH06. Based on these methods and the very limited number of joists studied, it appears promising that in-plane and out-of-plane K-factors of 0.75 and 0.85, respectively, could be used in computing the flexural buckling strength of web members in routine steel joist design. Recommendations for future work, which include systematically investigating a wider range of joist configurations and connection restraint, are provided.

Synthesis Of Triblock Copolymers By Radical Trap Assisted-Atom Transfer Radical Coupling

Monobrominated diblock copolymers composed of poly(styrene) (PSt), poly(methylacrylate) (PMA), or poly(methyl methacrylate) (PMMA) were synthesized by consecutive atom transfer radical polymerizations (ATRP). The brominated diblocks were utilized in atom transfer radical coupling (ATRC) and radical trap-assisted ATRC (RTA-ATRC) reactions to form ABA type triblock copolymers. Once PMMA-PStBr and PSt-PMABrBr were produced by ATRP, the synthes of PSt-PMA-PSt and PMMA-PSt- PMMA by ATRC and also by RTA-ATRC were attempted. The coupling methods were compared and it was found that RTA-ATRC succeeded in synthesizing PSt-PMA-PSt where ATRC could not, and that RTA-ATRC improved coupling over ATRC for PMMAPSt- PMMA. Incorporation of the radical trap 2-methyl-2-nitrosopropane (MNP) midchain allowed for simple thermal cleavage of the triblock to confirm the RTA-ATRC pathway occurred in preference over the head to head radical coupling pathway of ATRC. Triblocks made by ATRC did not cleave under our conditions, as no MNP was present and thus no labile C-O bond was incorporated. The RTA-ATRC pathway allowed for lower catalyst amounts (2 molar equivalents of copper(I)bromide and 2 molar equivalents of copper metal) and a high degree of coupling at lower temperatures (40°C). The RTA-ATRC improved upon ATRC because of its ability to generate a persistent radical and proceed by first order kinetics with respect to the chain end radical.

Physiological Consequences Of White-Nose Syndrome

White-nose syndrome (WNS) is a disease that has caused the mass mortality of hibernating bat species. Since its first discovery in the winter of 2006-2007, an estimated five million bats or more have been killed. Although infection with Pseudogymnoascus destructans (Pd, the causative agent of WNS) does not always result in death, bats that survive Pd infection may experience fitness consequences. To understand the physiological consequences of WNS, I measured reproductive rates of free-ranging hibernating bat species of the Northeastern United States. In addition, captive little brown myotis (Myotis lucifugus) bats that were infected by Pd but survived (¿WNS survivors¿) and uninfected bats were studied in order to understand the potential consequences (e.g., lower reproductive rates, decreased ability to heal wounds, degradation of wing tissue, and altered metabolic rates) of surviving WNS. No differences in reproductive rates were found between WNS-survivors and uninfected bats in either the field or in captivity. In addition, wound healing was not affected by Pd infection. However, wing tissue degradation was worse for little brown myotis 19 days post-hibernation, and mass specific metabolic rate (MSMR) was significantly higher for those infected with Pd 22 days post-hibernation. While it is clear that these consequences are a direct result of Pd infection, further research investigating the long-term consequences for both mothers and pups is necessary.

Friendship As A Relationship Infiltration Tactic During Human Mate Poaching: An Experimental Investigation

Previous research has characterized human mate poaching as a prevalent alternative mating strategy that entails risks and costs typically not present during general romantic courtship and attraction. This study is the first to experimentally investigate friendship between a poacher and poachee as a risk mitigation tactic. Participants (N = 382) read a vignette that differed by whether the poacher was male/female and whether the poacher and poachee were friends/acquaintances. Participants assessed the likelihood of the poacher being successful and incurring costs. They also rated the poacher and poachee on several personality and mate characteristics. Results revealed that friendship increased the perceived likelihood of success of a mate poaching attempt and decreased the perceived likelihood of several risks typically associated with mate poaching. However, friend-poachers were rated less favorably than acquaintance-poachers across measures of warmth, nurturance, and friendliness. These findings are interpreted using an evolutionary perspective. This study complements and builds upon previous findings and is the first experimental investigation of tactics mate poachers may use to mitigate risks inherent in mate poaching.

Exploration Of Survival Traits In The White-Nose Syndrome-Affected Big Brown Bat (Eptesicus Fuscus)

The widespread mortality of hibernating bats is associated with the emerging infectious disease white-nose syndrome (WNS), and has provoked a strong interest in understanding which bats will survive, and why? The ability of infected bats to resist WNS may depend upon variation in the expression of different characteristics. In a captive colony of big brown bats, I sought to characterize the phenotypic variability, repeatability, and survivability for several key ¿survival¿ traits, including: torpor patterns, microclimate preferences, and wound healing capacity. Torpor patterns were profiled using temperature sensitive dataloggers throughout the hibernation season, while microclimate preferences were quantified by using temperature-graded boxes and thermal imaging. In order to assess wound healing capacity, small wing biopsies were obtained from each bat and healing progress was tracked for one month. Individuals exhibited a wide range of phenotypes that were significantly influenced by sex and body condition. Repeatability estimates suggest that there is not a strong genetic basis for the observed variation in torpor patterns or microclimate preferences. Certain phenotypes (e.g., BMI) were associated with an increased probability of overwinter survivorship, which suggests a basis for intra-species differences in WNS susceptibility. The results from this project provide novel insight into what we know about ¿who will survive,¿ and will influence the direction and implementation of future conservation and mitigation strategies.

The Use Of Amido- And Imido-Functionalized Alpha Hydroxy Acids In The Creation Of Biodegradable Polyesters: An Exploration Of Va

The purpose of this thesis was to synthesize biodegradable polyesters from a wide array of functionalized ¿-hydroxy acids. The initial strategy was to use amido-functionalized ¿-hydroxy acids and 2-bromopropanoyl bromide to form amido-functionalized cyclic diesters. Then, the resulting cyclic diesters would be used in ring opening polymerization to create biodegradable polyesters. However, the spontaneous rapid degradation of the secondary amido-functionalized cyclic diester structure, as seen with 2-benzamido-hydroxyacetic acid, limited ring formation to tertiary amido-functionalized ¿-hydroxy acids. Also, the hydrophilic nature of most ¿-hydroxy acids allowed water into the crystal structure of the ¿-hydroxy acid. Then, when the ¿-hydroxy acid was used in ring forming reactions, the associated water deactivated reactive reagents and limited cyclic diester synthesis. These issues led to the synthesis of hydrophobic and tertiary amido- and imido-functionalized ¿-hydroxy acids, 2-phthalimido-2-hydroxyacetic acid and 2-(1-oxoisoindolin-2-yl) hydroxyacetic acid. The new ¿-hydroxy acids were used in two new polymerization techniques, melt polycondensation and solution polymerization, instead of ring open polymerization. Melt polycondensation and solution polymerization had shown previous success in forming oligomers of amido-functionalized ¿-hydroxy acids. Melt polycondensation was conducted by heating the monomer past its melting temperature under reduced pressure. The uncatalyzed melt polycondensation of 2-(1-oxoisoindolin-2-yl) hydroxyacetic acid created polyesters (¿ 960 g/mol). The scandium(III) trifluoromethanesulfonate enhanced melt polycondensation polymerization created slightly larger oligomers (¿ 1340 g/mol). However, 2-phthalimido-2-hydroxyacetic acid was not compatible with melt polycondensation because thermal degradation occurred. Thus, solution polymerization was conducted via Steglich esterification. Only oligomeric functionalized polyesters were formed (¿ 1060 g/mol). Future work should focus on optimization of the catalyst and the reaction conditions to obtain higher molecular weight polyesters. Also, 2-(1-oxoisoindolin-2-yl) hydroxyacetic acid should be utilized in the cyclic diester synthesis technique.