A nonlinear QCT-based finite element model validation study for the human femur tested in two configurations in vitro

Purpose Femoral fracture is a common medical problem in osteoporotic individuals. Bone mineral density (BMD) is the gold standard measure to evaluate fracture risk in vivo. Quantitative computed tomography (QCT)-based homogenized voxel finite element (hvFE) models have been proved to be more accurate predictors of femoral strength than BMD by adding geometrical and material properties. The aim of this study was to evaluate the ability of hvFE models in predicting femoral stiffness, strength and failure location for a large number of pairs of human femora tested in two different loading scenarios. Methods Thirty-six pairs of femora were scanned with QCT and total proximal BMD and BMC were evaluated. For each pair, one femur was positioned in one-legged stance configuration (STANCE) and the other in a sideways configuration (SIDE). Nonlinear hvFE models were generated from QCT images by reproducing the same loading configurations imposed in the experiments. For experiments and models, the structural properties (stiffness and ultimate load), the failure location and the motion of the femoral head were computed and compared. Results In both configurations, hvFE models predicted both stiffness (R2=0.82 for STANCE and R2=0.74 for SIDE) and femoral ultimate load (R2=0.80 for STANCE and R2=0.85 for SIDE) better than BMD and BMC. Moreover, the models predicted qualitatively well the failure location (66% of cases) and the motion of the femoral head. Conclusions The subject specific QCT-based nonlinear hvFE model cannot only predict femoral apparent mechanical properties better than densitometric measures, but can additionally provide useful qualitative information about failure location.

A patient-specific finite element methodology to predict damage accumulation in vertebral bodies under axial compression, sagittal flexion and combined loads

Due to the inherent limitations of DXA, assessment of the biomechanical properties of vertebral bodies relies increasingly on CT-based finite element (FE) models, but these often use simplistic material behaviour and/or single loading cases. In this study, we applied a novel constitutive law for bone elasticity, plasticity and damage to FE models created from coarsened pQCT images of human vertebrae, and compared vertebral stiffness, strength and damage accumulation for axial compression, anterior flexion and a combination of these two cases. FE axial stiffness and strength correlated with experiments and were linearly related to flexion properties. In all loading modes, damage localised preferentially in the trabecular compartment. Damage for the combined loading was higher than cumulated damage produced by individual compression and flexion. In conclusion, this FE method predicts stiffness and strength of vertebral bodies from CT images with clinical resolution and provides insight into damage accumulation in various loading modes.

Specific and Nonspecific Psychological Interventions for PTSD Symptoms: A Meta-Analysis With Problem Complexity as a Moderator

CONTEXT The necessity of specific intervention components for the successful treatment of patients with posttraumatic stress disorder is the subject of controversy. OBJECTIVE To investigate the complexity of clinical problems as a moderator of relative effects between specific and nonspecific psychological interventions. METHODS We included 18 randomized controlled trials, directly comparing specific and nonspecific psychological interventions. We conducted moderator analyses, including the complexity of clinical problems as predictor. RESULTS Our results have confirmed the moderate superiority of specific over nonspecific psychological interventions; however, the superiority was small in studies with complex clinical problems and large in studies with noncomplex clinical problems. CONCLUSIONS For patients with complex clinical problems, our results suggest that particular nonspecific psychological interventions may be offered as an alternative to specific psychological interventions. In contrast, for patients with noncomplex clinical problems, specific psychological interventions are the best treatment option.

Controlling for culture-specific response bias using ipsatization and response style indicators: Family orientation in seventeen cultures and two generations

Within-subject standardization (ipsatization) has been advocated as a possible means to control for culture-specific responding (e.g., Fisher, 2004). However, the consequences of different kinds of ipsatization procedures for the interpretation of mean differences remain unclear. The current study compared several ipsatization procedures with ANCOVA-style procedures using response style indicators for the construct of family orientation with data from 14 cultures and two generations from the Value-of-Children-(VOC)-Study (4135 dyads). Results showed that within-subject centering/standardizing across all Likert-scale items of the comprehensive VOC-questionnaire removed most of the original cross-cultural variation in family orientation and lead to a non-interpretable pattern of means in both generations. Within-subject centering/standardizing using a subset of 19 unrelated items lead to a decrease to about half of the original effect size and produced a theoretically meaningful pattern of means. A similar effect size and similar mean differences were obtained when using a measure of acquiescent responding based on the same set of items in an ANCOVA-style analysis. Additional models controlling for extremity and modesty performed worse, and combinations did not differ from the acquiescence-only model. The usefulness of different approaches to control for uniform response styles (scalar equivalence not given) in cross- cultural comparisons is discussed.