Population-Based Design of Mandibular Plates Based on Bone Quality and Morphology

In this paper we present a new population-based implant design methodology, which advances the state-of-the-art approaches by combining shape and bone quality information into the design strategy. The method enhances the mechanical stability of the fixation and reduces the intra-operative in-plane bending which might impede the functionality of the locking mechanism. The method is presented for the case of mandibular locking fixation plates, where the mandibular angle and the bone quality at screw locations are taken into account. Using computational anatomy techniques, the method automatically derives, from a set of computed tomography images, the mandibular angle and the bone thickness and intensity values at the path of every screw. An optimisation strategy is then used to optimise the two parameters of plate angle and screw position. Results for the new design are presented along with a comparison with a commercially available mandibular locking fixation plate. A statistically highly significant improvement was observed. Our experiments allowed us to conclude that an angle of 126° and a screw separation of 8mm is a more suitable design than the standard 120° and 9mm.

Population-based design of mandibular fixation plates with bone quality and morphology considerations

In this paper we present a new population-based implant design methodology, which advances the state-of-the-art approaches by combining shape and bone quality information into the design strategy. The method may enhance the mechanical stability of the fixation and reduces the intra-operative in-plane bending which might impede the functionality of the locking mechanism. The computational method is presented for the case of mandibular locking fixation plates, where the mandibular angle and the bone quality at screw locations are taken into account. The method automatically derives the mandibular angle and the bone thickness and intensity values at the path of every screw from a set of computed tomography images. An optimization strategy is then used to optimize the two parameters of plate angle and screw position. The method was applied to two populations of different genders. Results for the new design are presented along with a comparison with a commercially available mandibular locking fixation plate (MODUS(®) TriLock(®) 2.0/2.3/2.5, Medartis AG, Basel, Switzerland). The proposed designs resulted in a statistically significant improvement in the available bone thickness when compared to the standard plate. There is a higher probability that the proposed implants cover areas of thicker cortical bone without compromising the bone mineral density around the screws. The obtained results allowed us to conclude that an angle and screw separation of 129° and 9 mm for females and 121° and 10 mm for males are more suitable designs than the commercially available 120° and 9 mm.

Minimization of Intra-Operative Shaping of Orthopaedic Fixation Plates: A Population-Based Design

In this paper we present a new population-based method for the design of bone fixation plates. Standard pre-contoured plates are designed based on the mean shape of a certain population. We propose a computational process to design implants while reducing the amount of required intra-operative shaping, thus reducing the mechanical stresses applied to the plate. A bending and torsion model was used to measure and minimize the necessary intra-operative deformation. The method was applied and validated on a population of 200 femurs that was further augmented with a statistical shape model. The obtained results showed substantial reduction in the bending and torsion needed to shape the new design into any bone in the population when compared to the standard mean-based plates.

FORA - A Fuzzy Set Based Framework for Online Reputation Management

The Social Web offers increasingly simple ways to publish and disseminate personal or opinionated information, which can rapidly exhibit a disastrous influence on the online reputation of organizations. Based on social Web data, this study describes the building of an ontology based on fuzzy sets. At the end of a recurring harvesting of folksonomies by Web agents, the aggregated tags are purified, linked, and transformed to a so-called fuzzy grassroots ontology by means of a fuzzy clustering algorithm. This self-updating ontology is used for online reputation analysis, a crucial task of reputation management, with the goal to follow the online conversation going on around an organization to discover and monitor its reputation. In addition, an application of the Fuzzy Online Reputation Analysis (FORA) framework, lesson learned, and potential extensions are discussed in this article.

The course of chronic and recurrent low back pain in the general population

Using latent class analysis (LCA), a previous study on patients attending primary care identified four courses of low back pain (LBP) over the subsequent 6 months. To date, no studies have used longitudinal pain recordings to examine the "natural" course of recurrent and chronic LBP in a population-based sample of individuals. This study examines the course of LBP in the general population and elaborates on the stability and criterion-related validity of the clusters derived. A random sample of 400 individuals reporting LBP in a population-based study was asked to complete a comprehensive questionnaire at the start and end of the year's survey, and 52 weekly pain diaries in between. The latter were analyzed using LCA. 305 individuals returned more than 50% of the diaries. Four clusters were identified (severe persistent, moderate persistent, mild persistent, and fluctuating). The clusters differed significantly with regards to pain and disability. Assessment of cluster stability showed that a considerable proportion of patients in the "fluctuating" group changed their classification over time. Three of the four clusters describing the typical course of pain matched the clusters described previously for patients in primary care. Due to the population-based design, this study achieves, for the first time, a close insight into the "natural" course of chronic and recurrent low back pain, including individuals that did not necessarily visit the general practitioner. The findings will help to understand better the nature of this pain in the general population.

Dicto: A Unified DSL for Testing Architectural Rules

Software architecture consists of a set of design choices that can be partially expressed in form of rules that the implementation must conform to. Architectural rules are intended to ensure properties that fulfill fundamental non-functional requirements. Verifying architectural rules is often a non- trivial activity: available tools are often not very usable and support only a narrow subset of the rules that are commonly specified by practitioners. In this paper we present a new highly-readable declarative language for specifying architectural rules. With our approach, users can specify a wide variety of rules using a single uniform notation. Rules can get tested by third-party tools by conforming to pre-defined specification templates. Practitioners can take advantage of the capabilities of a growing number of testing tools without dealing with them directly.

How specific is apprenticeship training? Evidence from inter-firm and occupational mobility after graduation

Do apprenticeships convey mainly general or also firm- and occupation-specific human capital? Specific human capital may allow for specialization gains, but may also lead to allocative inefficiency due to mobility barriers. We analyse the case of Switzerland, which combines a comprehensive, high-quality apprenticeship system with a lightly regulated labour market. To assess human capital transferability after standardized firm-based apprenticeship training, we analyse inter-firm and occupational mobility and their effects on post-training wages. Using a longitudinal data set based on the PISA 2000 survey, we find high inter-firm and low occupational mobility within one year after graduation. Accounting for endogenous changes, we find a negative effect of occupation changes on wages, but no significant wage effect for firm changes. This indicates that occupation-specific human capital is an important component of apprenticeship training and that skills are highly transferable within an occupational field.

A navigation system for percutaneous needle interventions based on PET/CT images: design, workflow and error analysis of soft tissue and bone punctures

Percutaneous needle intervention based on PET/CT images is effective, but exposes the patient to unnecessary radiation due to the increased number of CT scans required. Computer assisted intervention can reduce the number of scans, but requires handling, matching and visualization of two different datasets. While one dataset is used for target definition according to metabolism, the other is used for instrument guidance according to anatomical structures. No navigation systems capable of handling such data and performing PET/CT image-based procedures while following clinically approved protocols for oncologic percutaneous interventions are available. The need for such systems is emphasized in scenarios where the target can be located in different types of tissue such as bone and soft tissue. These two tissues require different clinical protocols for puncturing and may therefore give rise to different problems during the navigated intervention. Studies comparing the performance of navigated needle interventions targeting lesions located in these two types of tissue are not often found in the literature. Hence, this paper presents an optical navigation system for percutaneous needle interventions based on PET/CT images. The system provides viewers for guiding the physician to the target with real-time visualization of PET/CT datasets, and is able to handle targets located in both bone and soft tissue. The navigation system and the required clinical workflow were designed taking into consideration clinical protocols and requirements, and the system is thus operable by a single person, even during transition to the sterile phase. Both the system and the workflow were evaluated in an initial set of experiments simulating 41 lesions (23 located in bone tissue and 18 in soft tissue) in swine cadavers. We also measured and decomposed the overall system error into distinct error sources, which allowed for the identification of particularities involved in the process as well as highlighting the differences between bone and soft tissue punctures. An overall average error of 4.23 mm and 3.07 mm for bone and soft tissue punctures, respectively, demonstrated the feasibility of using this system for such interventions. The proposed system workflow was shown to be effective in separating the preparation from the sterile phase, as well as in keeping the system manageable by a single operator. Among the distinct sources of error, the user error based on the system accuracy (defined as the distance from the planned target to the actual needle tip) appeared to be the most significant. Bone punctures showed higher user error, whereas soft tissue punctures showed higher tissue deformation error.