Initial clinical experience with the 4-F self-expanding XPERT stent system for infrapopliteal treatment of patients with severe claudication and critical limb ischemia

PURPOSE: To evaluate the primary success and short-term patency associated with a new 4-F sheath-compatible self-expanding nitinol stent after failed conventional angioplasty of distal popliteal and infrapopliteal lesions in severe lifestyle-limiting claudication (LLC) and chronic critical limb ischemia (CLI). MATERIALS AND METHODS: Between May 2003 and July 2005, 35 patients with Rutherford category 3-5 disease (16 patients with CLI, 19 patients with LLC) underwent percutaneous transluminal angioplasty (PTA) and stent implantation. Indications for stent placement were residual stenosis, flow-limiting dissections, or elastic recoil after PTA. Before and after the intervention and during the 6-month follow-up, clinical investigation, color-flow and duplex Doppler ultrasonography, and digital subtraction angiography were performed. Technical success, primary patency at 6 months, clinical improvement as defined by Rutherford with clinical and hemodynamic measures, and complications were evaluated. RESULTS: A total of 22 patients underwent distal popliteal artery stent placement and 13 underwent tibioperoneal artery stent placement. Stent implantation was successfully performed in all patients. After stent placement, the primary cumulative patency rate for the study group at 6 months was 82%. The mean resting ankle-brachial index at baseline was 0.50 +/- 0.16 and significantly increased to 0.90 +/- 0.17 at 12-24 hours after intervention and 0.82 +/- 0.24 at latest follow-up (P < .001 for both). The sustained clinical improvement rate was 80% at the 6-month follow-up. The 6-month limb salvage rate regarding major amputation was 100%. The rate of major complications was 17%. CONCLUSIONS: Infrapopliteal application of the new nitinol stent is a safe, feasible, and effective method with good short-term patency rate in the treatment of severe LLC and chronic CLI.

Terminal short arm domains of basement membrane laminin are critical for its self-assembly

Laminin self-assembles into large polymers by a cooperative two-step calcium-dependent mechanism (Yurchenco, P. D., E. C. Tsilibary, A. S. Charonis, and H. Furthmayr. 1985. J. Biol. Chem. 260:7636-7644). The domain specificity of this process was investigated using defined proteolytically generated fragments corresponding to the NH2-terminal globule and adjacent stem of the short arm of the B1 chain (E4), a complex of the two short arms of the A and B2 chains attached to the proximal stem of a third short arm (E1'), a similar complex lacking the globular domains (P1'), and the distal half of the long arm attached to the adjacent portion of the large globule (E8). Polymerization, followed by an increase of turbidity at 360 nm in neutral isotonic TBS containing CaCl2 at 35 degrees C, was quantitatively inhibited in a concentration-dependent manner with laminin fragments E4 and E1' but not with fragments E8 and P1'. Affinity retardation chromatography was used for further characterization of the binding of laminin domains. The migration of fragment E4, but not of fragments E8 and P1', was retarded in a temperature- and calcium-dependent fashion on a laminin affinity column but not on a similar BSA column. These data are evidence that laminin fragments E4 and E1' possess essential terminal binding domains for the self-aggregation of laminin, while fragments E8 and P1' do not. Furthermore, the individual domain-specific interactions that contribute to assembly are calcium dependent and of low affinity.

From supramolecular sheets to fibers and back: establishing the critical parameters that govern the morphology of pyrene-based self-assembled materials

The precise arraying of functional entities in morphologically well-defined shapes remains one of the key challenges in the processing of organic molecules1. Among various π-conjugated species, pyrene exhibits a set of unique properties, which make it an attractive compound for the utilization in materials science2. In this contribution we report on properties of self-assembled structures prepared from amphiphilic pyrene trimers (Py3) consisting of phosphodiester-linked pyrenes. Depending on the geometry of a pyrene core substitution (1.6-, 1.8-, or 2.7- type, see Scheme), the thermally-controlled self-assembly allows the preparation of supramolecular architectures of different morphologies in a bottom-up approach: two-dimensional (2D) nanosheets3 are formed in case of 1.6- and 2.7-substitution4 whereas one-dimensional (1D) fibers are built from 1.8- substituted isomers. The morphologies of the assemblies are established by AFM and TEM, and the results are further correlated with spectroscopic and scattering data. Two-dimensional assemblies consist of an inner layer of hydrophobic pyrenes, sandwiched between a net of phosphates. Due to the repulsion of the negative charges, the 2D assemblies exist mostly as free-standing sheets. An internal alignment of pyrenes leads to strong exciton coupling with an unprecedented observation (simultaneous development of J- and H-bands from two different electronic transitions). Despite the similarity in spectroscopic properties, the structural parameters of the 2D aggregates drastically depend on the preparation procedure. Under certain conditions extra-large sheets (thickness of 2 nm, aspect ratio area/thickness ~107) in aqueous solution are formed4B. Finally, one-dimensional assemblies are formed as micrometer-long and nanometer-thick fibers. Both, planar and linear structures are intriguing objects for the creation of conductive nanowires that may find interest for applications in supramolecular electronics.

From supramolecular sheets to fibers and back: establishing the critical parameters that govern the morphology of pyrene-based self-assembled materials

The precise arraying of functional entities in morphologically well-defined shapes remains one of the key challenges in the processing of organic molecules1. Among various π-conjugated species, pyrene exhibits a set of unique properties, which make it an attractive compound for the utilization in materials science2. In this contribution we report on properties of self-assembled structures prepared from amphiphilic pyrene trimers (Py3) consisting of phosphodiester-linked pyrenes. Depending on the geometry of a pyrene core substitution (1.6-, 1.8-, or 2.7- type, see Scheme), the thermally-controlled self-assembly allows the preparation of supramolecular architectures of different morphologies in a bottom-up approach: two-dimensional (2D) nanosheets3 are formed in case of 1.6- and 2.7-substitution4 whereas one-dimensional (1D) fibers are built from 1.8- substituted isomers. The morphologies of the assemblies are established by AFM and TEM, and the results are further correlated with spectroscopic and scattering data. Two-dimensional assemblies consist of an inner layer of hydrophobic pyrenes, sandwiched between a net of phosphates. Due to the repulsion of the negative charges, the 2D assemblies exist mostly as free-standing sheets. An internal alignment of pyrenes leads to strong exciton coupling with an unprecedented observation (simultaneous development of J- and H-bands from two different electronic transitions). Despite the similarity in spectroscopic properties, the structural parameters of the 2D aggregates drastically depend on the preparation procedure. Under certain conditions extra-large sheets (thickness of 2 nm, aspect ratio area/thickness ~107) in aqueous solution are formed4B. Finally, one-dimensional assemblies are formed as micrometer-long and nanometer-thick fibers. Both, planar and linear structures are intriguing objects for the creation of conductive nanowires that may find interest for applications in supramolecular electronics.

Amygdala response to self-critical stimuli and symptom improvement in psychotherapy for depression

Background: Cognitive–behavioural therapy is efficacious in the treatment of major depressive disorder but response rates are still far from satisfactory. Aims: To better understand brain responses to individualised emotional stimuli and their association with outcome, to enhance treatment. Method: Functional magnetic resonance imaging data were collected prior to individual psychotherapy. Differences in brain activity during passive viewing of individualised self-critical material in 23 unmedicated out-patients with depression and 28 healthy controls were assessed. The associations between brain activity, cognitive and emotional change, and outcome were analysed in 21 patients. Results: Patients showed enhanced activity in the amygdala and ventral striatum compared with the control group. Non-response to therapy was associated with enhanced activity in the right amygdala compared with those who responded, and activity in this region was negatively associated with outcome. Emotional but not cognitive changes mediated this association. Conclusions: Amygdala hyperactivity may lessen symptom improvement in psychotherapy for depression through attenuating emotional skill acquisition.

[Prophylaxis and therapy of postdural puncture headache--a critical evaluation of treatment options]

Since the first description of spinal and epidural anaesthesia, postdural puncture headache (PDPH) is a well known complication. Its prophylaxis and treatment has been studied and discussed for more than 100 years, but the evidence is still limited. Due to relatively low prevalence of PDPH, prospective RCTs are often missing, and the frequently self-limiting character of PDPH impedes an adequate interpretation of results from studies without a control group. Taking side effects and complications into account, a prophylactic treatment of PDPH cannot be recommended. In case of PDPH, non-opioid analgesics are the first choice treatment. The epidural blood patch remains the mainstay of severe PDPH therapy. Noninvasive therapies like theophylline, sumatriptan and ACTH can be an alternative. However, an evidence-based recommendation is lacking. The development of standard operating procedures for accidental dural punctures and PDPH is recommended.

Determinants of sustained viral suppression in HIV-infected patients with self-reported poor adherence to antiretroviral therapy

Background Good adherence to antiretroviral therapy (ART) is critical for successful HIV treatment. However, some patients remain virologically suppressed despite suboptimal adherence. We hypothesized that this could result from host genetic factors influencing drug levels. Methods Eligible individuals were Caucasians treated with efavirenz (EFV) and/or boosted lopinavir (LPV/r) with self-reported poor adherence, defined as missing doses of ART at least weekly for more than 6 months. Participants were genotyped for single nucleotide polymorphisms (SNPs) in candidate genes previously reported to decrease EFV (rs3745274, rs35303484, rs35979566 in CYP2B6) and LPV/r clearance (rs4149056 in SLCO1B1, rs6945984 in CYP3A, rs717620 in ABCC2). Viral suppression was defined as having HIV-1 RNA <400 copies/ml throughout the study period. Results From January 2003 until May 2009, 37 individuals on EFV (28 suppressed and 9 not suppressed) and 69 on LPV/r (38 suppressed and 31 not suppressed) were eligible. The poor adherence period was a median of 32 weeks with 18.9% of EFV and 20.3% of LPV/r patients reporting missed doses on a daily basis. The tested SNPs were not determinant for viral suppression. Reporting missing >1 dose/week was associated with a lower probability of viral suppression compared to missing 1 dose/week (EFV: odds ratio (OR) 0.11, 95% confidence interval (CI): 0.01–0.99; LPV/r: OR 0.29, 95% CI: 0.09–0.94). In both groups, the probability of remaining suppressed increased with the duration of continuous suppression prior to the poor adherence period (EFV: OR 3.40, 95% CI: 0.62–18.75; LPV/r: OR 5.65, 95% CI: 1.82–17.56). Conclusions The investigated genetic variants did not play a significant role in the sustained viral suppression of individuals with suboptimal adherence. Risk of failure decreased with longer duration of viral suppression in this population.

Critical review of the use of erythropoietin in the treatment of anaemia during therapy for chronic hepatitis C

Combined pegylated interferon (PegIFN) and ribavirin represents the standard therapy for patients with chronic hepatitis C (CHC), which allows for sustained viral response (SVR) in up to 90% of patients depending on certain viral and host factors. Clinical studies have demonstrated the importance of adherence to therapy, that is, the ability of patients to tolerate and sustain a fully dosed therapy regimen. Adherence is markedly impaired by treatment-related adverse effects. In particular, haemolytic anaemia often requires dose reduction or termination of ribavirin treatment, which compromises treatment efficacy. Recent evidence points to a beneficial role of recombinant erythropoietin (EPO) in alleviating ribavirin-induced anaemia thereby improving quality of life, enabling higher ribavirin dosage and consequently improving SVR. However, no general consensus exists regarding the use of EPO for specific indications: its optimal dosing, treatment benefits and potential risks or cost efficiency. The Swiss Association for the Study of the Liver (SASL) has therefore organized an expert meeting to critically review and discuss the current evidence and to phrase recommendations for clinical practice. A consensus was reached recommending the use of EPO for patients infected with viral genotype 1 developing significant anaemia below 100 g/L haemoglobin and a haematocrit of <30% during standard therapy to improve quality of life and sustain optimal ribavirin dose. However, the evidence supporting its use in patients with pre-existing anaemia, non-1 viral genotypes, a former relapse or nonresponse, liver transplant recipients and cardiovascular or pulmonary disease is considered insufficient.

Self-assembling cannabinomimetics: supramolecular structures of N-alkyl amides

Certain fatty acid N-alkyl amides from the medicinal plant Echinacea activate cannabinoid type-2 (CB2) receptors. In this study we show that the CB2-binding Echinacea constituents dodeca-2E,4E-dienoic acid isobutylamide (1) and dodeca-2E,4E,8Z,10Z-tetraenoic acid isobutylamide (2) form micelles in aqueous medium. In contrast, micelle formation is not observed for undeca-2E-ene-8,10-diynoic acid isobutylamide (3), which does not bind to CB2, or structurally related endogenous cannabinoids, such as arachidonoyl ethanolamine (anandamide). The critical micelle concentration (CMC) range of 1 and 2 was determined by fluorescence spectroscopy as 200-300 and 7400-10000 nM, respectively. The size of premicelle aggregates, micelles, and supermicelles was studied by dynamic light scattering. Microscopy images show that compound 1, but not 2, forms globular and rod-like supermicelles with radii of approximately 75 nm. The self-assembling N-alkyl amides partition between themselves and the CB2 receptor, and aggregation of N-alkyl amides thus determines their in vitro pharmacological effects. Molecular mechanics by Monte Carlo simulations of the aggregation process support the experimental data, suggesting that both 1 and 2 can readily aggregate into premicelles, but only 1 spontaneously assembles into larger aggregates. These findings have important implications for biological studies with this class of compounds.

Self-Absorption and Luminescence Quantum Yields of Dye-Zeolite L Composites

Electronic absorption and fluorescence spectra based on transmission measurements of thin layers obtained from new perylene−zeolite L composites and new dye1,dye2−zeolite L sandwich composites, the latter acting as antenna systems, have been investigated and analyzed. The influence of extra- and intraparticle self-absorption on the spectral shape and fluorescence quantum yield is discussed in detail. Due to its intraparticle origin, self-absorption and re-emission can often not be avoided in organized systems such as dye−zeolite L composites where a high density of chromophores is a prerequisite for obtaining the desired photophysical properties. We show, however, that it can be avoided or at least minimized by preparing dye1,dye2−zeolite L sandwich composites where donors are present in a much larger amount than the acceptors because they act as antenna systems.

Two-dimensional supramolecular polymers: controlled formation and visualization on the surface

Self – assembly is a powerful tool for the construction of highly organized nanostructures. Therefore, the possibility to control and predict pathways of molecular ordering on the nanoscale level is a critical issue for the production of materials with tunable and adaptive macroscopic properties. 2D polymers are attractive objects for the field of material sciences due to their exceptional properties. [1] As shown before, amphiphilic oligopyrenotides (produced via automated solid-phase synthesis) form rod–like supramolecular polymers in water. [2] These assemblies form 1D objects. [3] By applying certain changes to the design of the oligopyrenotide units the dimensionality of the formed assemblies can be influenced. Herein, we demonstrate that Py3 (see Figure 1) forms defined supramolecular assemblies under thermodynamic conditions in water. To study Py3 self-assembly, we carried out whole set of spectroscopic (UV/vis, fluorescence, DLS) and microscopic experiments (AFM). The obtained results suggest that oligopyrenotides with the present type of geometry and linker length leads to formation of 2D supramolecular assemblies.