A Compensating Anastigmatic Submillimeter Array Imaging System for STEAMR

In this paper, we present a novel technique for the removal of astigmatism in submillimeter-wave optical systems through employment of a specific combination of so-called astigmatic off-axis reflectors. This technique treats an orthogonally astigmatic beam using skew Gaussian beam analysis, from which an anastigmatic imaging network is derived. The resultant beam is considered truly stigmatic, with all Gaussian beam parameters in the orthogonal directions being matched. This is thus considered an improvement over previous techniques wherein a beam corrected for astigmatism has only the orthogonal beam amplitude radii matched, with phase shift and phase radius of curvature not considered. This technique is computationally efficient, negating the requirement for computationally intensive numerical analysis of shaped reflector surfaces. The required optical surfaces are also relatively simple to implement compared to such numerically optimized shaped surfaces. This technique is implemented in this work as part of the complete optics train for the STEAMR antenna. The STEAMR instrument is envisaged as a mutli-beam limb sounding instrument operating at submillimeter wavelengths. The antenna optics arrangement for this instrument uses multiple off-axis reflectors to control the incident radiation and couple them to their corresponding receiver feeds. An anastigmatic imaging network is successfully implemented into an optical model of this antenna, and the resultant design ensures optimal imaging of the beams to the corresponding feed horns. This example also addresses the challenges of imaging in multi-beam antenna systems.

Fine-tuning of substrate architecture and surface chemistry promotes muscle tissue development

Tissue engineering has been increasingly brought to the scientific spotlight in response to the tremendous demand for regeneration, restoration or substitution of skeletal or cardiac muscle after traumatic injury, tumour ablation or myocardial infarction. In vitro generation of a highly organized and contractile muscle tissue, however, crucially depends on an appropriate design of the cell culture substrate. The present work evaluated the impact of substrate properties, in particular morphology, chemical surface composition and mechanical properties, on muscle cell fate. To this end, aligned and randomly oriented micron (3.3±0.8 μm) or nano (237±98 nm) scaled fibrous poly(ε-caprolactone) non-wovens were processed by electrospinning. A nanometer-thick oxygen functional hydrocarbon coating was deposited by a radio frequency plasma process. C2C12 muscle cells were grown on pure and as-functionalized substrates and analysed for viability, proliferation, spatial orientation, differentiation and contractility. Cell orientation has been shown to depend strongly on substrate architecture, being most pronounced on micron-scaled parallel-oriented fibres. Oxygen functional hydrocarbons, representing stable, non-immunogenic surface groups, were identified as strong triggers for myotube differentiation. Accordingly, the highest myotube density (28±15% of total substrate area), sarcomeric striation and contractility were found on plasma-coated substrates. The current study highlights the manifold material characteristics to be addressed during the substrate design process and provides insight into processes to improve bio-interfaces.

CT scan based determination of optimal bone corridor for atlantoaxial ventral screw fixation in miniature breed dogs

OBJECTIVE: To describe the most reliable insertion angle, corridor length and width to place a ventral transarticular atlantoaxial screw in miniature breed dogs. STUDY DESIGN: Retrospective CT imaging study. SAMPLE POPULATION: Cervical CT scans of toy breed dogs (n = 21). METHODS: Dogs were divided into 2 groups--group 1: no atlantoaxial abnormalities; group 2: atlantoaxial instability. Insertion angle in medial to lateral and ventral to dorsal direction was measured in group 1. Corridor length and width were measured in groups 1 and 2. Corridor width was measured at 3 points of the corridor. Each variable was measured 3 times and the mean used for statistical analysis. RESULTS: Mean +/- SD optimal transarticular atlantoaxial insertion angle was determined to be 40 +/- 1 degrees in medial to lateral direction from the midline and 20 +/- 1 degrees in ventral to dorsal direction from the floor of the neural canal of C2. Mean corridor length was 7 mm (range, 4.5-8.0 mm). Significant correlation was found between corridor length, body weight, and age. Mean bone corridor width ranged from 3 to 5 mm. Statistically significant differences were found between individuals, gender and measured side. CONCLUSIONS: Optimal placement of a transarticular screw for atlantoaxial joint stabilization is very demanding because the screw path corridor is very narrow.

The role of brand marketing in snowboarding: A comparative study of Switzerland and New Zealand

Introduction: Brands play an essential role in the organizational structure of snowboarding by sponsoring athletes, arranging events, contributing to product development and developing long-term partnerships with other key actors. However, the specialities of their role in scene sports, such as creating identities, networking and brand marketing strategies, have not been extensively researched. This study aims to provide an analysis of the function of brands within the snowboarding subculture by comparing how the sport is organized in Switzerland and New Zealand. Sociological theories of subcultures (Hitzler & Niederbacher, 2010) and social networks (Stegbauer, 2008) are used to defi ne the structures of the sport, whereas marketing and branding theories (Adjouri & Stastny, 2006) help to understand the role of the brands. Snowboarding will be defi ned as an alternative sports subculture based on characteristics such as aesthetics, adventure and new resources of performance (Schwier, 2006). Such a defi nition also begs for a novel form of analyzing its organization. Unlike more conventional structures, the organization of snowboarding allows a variety of actors to get involved in leading the sport. By portraying and encouraging differentiated identities and lifestyles, athletes provide a space for other actors to fi nd their place within the sport (Wheaton, 2005). According to Stegbauers network theory, individual actors are able to obtain high positions and defi ne their identity depending on their ties to actors and networks within the subculture (Stegbauer, 2008). For example, social capital, contacts within the sport and insider knowledge on subculture-related information enable actors to get closer to the core (Hitzler & Niederbacher, 2010). Actors who do not have close networks and allies within the subculture are less likely to engage successfully in the culture, whether as an individual or as a commercial actor (Thorpe, 2011). This study focuses on the organizational structure of snowboarding by comparing the development of the sport in Switzerland and New Zealand. An analysis of snowboarding in two nations with diverse cultures and economic systems allows a further defi nition of the structural organization of the sport and explains how brands play an important role in the sport. Methods: The structural organization of the sport will be analyzed through an ethnographic approach, using participant observation at various leading events in Switzerland (Freestyle.ch, European Open) and New Zealand (World Heli Challenge, New Zealand Open, New Zealand Winter Games). The data is analyzed using grounded theory (Glaser & Strauss 1967) and gives an overview of the actors that are playing an important role in the local development of snowboarding. Participant observation was also used as a tool to get inside the sport culture and opened up the possibility to make over 40 semi-structured qualitative expert interviews with international core actors from 11 countries. Obtaining access to one actor as a partner early on helped to get inside the local sport culture. The ‘snowball effect’ allowed the researcher to acquire access, build trust and conduct interviews with experts within the core scene. All the interviewed actors have a direct infl uence on the sport in one or both countries, which permit a cross-analysis. The data of the interviews was evaluated through content analysis (Mayring 2010). The two methods together provided suffi cient data to analyze the organizational structure and discuss the role of brand marketing within snowboarding. Results: An actors mapping by means of a center-periphery framework has identifi ed fi ve main core groups: athletes, media representatives, brand-marketing managers, resort managers and event organizers. In both countries the same grouping of actors were found. Despite possessing different and frequently multiple roles and responsibilities, core actors appear to have a strong common identifi cation as ‘snowboarders’, are considered to be part of the organizational elite of the sport and tend to advocate similar goals. The author has found that brands in Switzerland tend to have a larger impact on the broader snowboarding culture due to a number of factors discussed below. Due to a larger amount of snowboarders and stronger economic power in Europe, snowboarders are making attempts to differentiate themselves from other winter sports, while competing with each other to develop niche markets. In New Zealand, on the other hand, the smaller market enables more cooperation and mutual respect within snowboarders. Further they are more closely linked to other winter sports and are satisfi ed with being lumped together. In both countries, brands have taken up the role of supporting young athletes, organizing competitions and feeding media with subculture-related content. Brands build their image and identity through the collaboration with particular athletes who can represent the values of the brand. Local and global communities with similar lifestyles and interests are being built around brands that share a common vision of the sport. The dominance of brands in snowboarding has enabled them with the power to organize and rule the sport through its fan base and supporters. Brands were defi ned by interviewees as independent institutions led by insiders who know the codes and symbols of the sport and were given trust and credibility. The brands identify themselves as the engines of the sport by providing the equipment, opportunities for athletes to get exposure, allowing media to get exclusive information on activities, events and sport-related stories. Differences between the two countries are more related to the economic system. While Switzerland is well integrated in the broader European market, New Zealand’s geographical isolation and close proximity to Australia tends to limit its market. Further, due to different cultural lifestyles, access to resorts and seasonal restrictions, to name a few, the amount of people practicing winter sports in New Zealand is much smaller than in Switzerland. However, this also presents numerous advantages. For example, the short southern hemisphere winter season in New Zealand enables them to attract international sports athletes, brands and representatives in a period when Europe and North America is in summer. Further, the unique snow conditions in New Zealand and majestic landscape is popular for attracting world renowned photo- and cinematographers. Another advantage is the less populated network as it provides the opportunity for individuals to gain easier access to the core of the sport, obtain diverse positions and form a unique identity and market. In Switzerland, on the other hand, the snowboarding network is dense with few positions available for the taking. Homegrown brands with core recognition are found in both countries. It was found that the Swiss brands tend to have a larger impact on the market, whereas in New Zealand, the sport is more dependent on import products by foreign brands. Further, athletes, events and resorts in New Zealand are often dependent on large brand sponsorships from abroad such as from brand headquarters in the Unites States. Thus, due to its location in the centre of Europe, Swiss brands can take advantage of brands which are closer in proximity and culture to sponsor athletes and events. In terms of media coverage, winter sports in New Zealand tend to have a minor coverage and tradition in local mass media, which leads to less exposure, recognition and investment into the sport. This is also related to how snowboarding is more integrated into other winter sports in New Zealand. Another difference is the accessibility of the ski resort by the population. While in Switzerland the resorts are mostly being visited by day-travelers, ‘weekend warriors’ and holiday makers, the location of the resorts in New Zealand make it diffi cult to visit for one day. This is in part due to the fact that Swiss ski resorts and villages are usually the same location and are accessible through public transportation, while the ski resorts in New Zealand have been built separately from the villages. Further, the villages have not been built to accommodate to high tourist arrivals. Thus, accommodation and food facilities are limited and there is a lack of public transportation to the resorts. Discussion: The fi ndings show that networks and social relations combined with specifi c knowledge on scene-related attributes are crucial in obtaining opportunities within the sport. Partnerships as well as competition between these different actors are necessary for core acceptance, peer credibility and successful commercial interests. Brands need to maintain effective marketing strategies and identities which incorporate subcultural forms of behavior and communication. In order to sustain credibility from its fans, athletes and other snowboarding actors, brands need to maintain their insider status through social networks and commercial branding strategies. The interaction between all actors is a reciprocated process, where social capital, networks and identities are being shared. While the overall structure of snowboard subcultures in Europe and New Zealand are similar, there are some distinct characteristics which make each one unique. References Adjouri, N. & Stastny, P. (2006). Sport-Branding: Mit Sport-Sponsoring zum Markenerfolg. Wiesbaden: Gabler. Glaser, B. & Strauss, K. (1967). The discovery of grounded theory: Strategies for qualitative research. Chicago: Aldine. Hebdige, D. (2009). Subculture; The meaning of style. New York: Routledge. Hitzler, R. & Niederbacher, A. (2010). Leben in Szenen: Formen juveniler Vergemeinschaftung heute. Wiesbaden: Verlag für Sozialwissenschaften. Mayring, P. (2010). Qualitative Inhaltsanalyse: Grundlagen und Techniken. Weinheim: Beltz. Schwier, J. (2006). Repräsentationen des Trendsports. Jugendliche Bewegungskulturen, Medien und Marketing. In: Gugutzer, R. (Hrsg.). body turn. Perspektiven der Soziologie des Körpers und des Sports. Bielefeld: transcript (S. 321-340). Stegbauer, C. (2008). Netzwerkanalyse und Netzwerktheorie. Ein neues Paradigma in den Sozialwissenschaften. Wiesbaden: VS Verlag für Sozialwissenschaften. Thorpe, H. (2011). Snowboarding bodies in theory and practice. Basingstoke: Palgrave Macmillan. Wheaton, B. (2005). Understanding lifestyle sports; consumption, identity and difference. New York: Routledge.

A g-factor metric for k-t-GRAPPA- and PEAK-GRAPPA-based parallel imaging.

PURPOSE The aim of this work is to derive a theoretical framework for quantitative noise and temporal fidelity analysis of time-resolved k-space-based parallel imaging methods. THEORY An analytical formalism of noise distribution is derived extending the existing g-factor formulation for nontime-resolved generalized autocalibrating partially parallel acquisition (GRAPPA) to time-resolved k-space-based methods. The noise analysis considers temporal noise correlations and is further accompanied by a temporal filtering analysis. METHODS All methods are derived and presented for k-t-GRAPPA and PEAK-GRAPPA. A sliding window reconstruction and nontime-resolved GRAPPA are taken as a reference. Statistical validation is based on series of pseudoreplica images. The analysis is demonstrated on a short-axis cardiac CINE dataset. RESULTS The superior signal-to-noise performance of time-resolved over nontime-resolved parallel imaging methods at the expense of temporal frequency filtering is analytically confirmed. Further, different temporal frequency filter characteristics of k-t-GRAPPA, PEAK-GRAPPA, and sliding window are revealed. CONCLUSION The proposed analysis of noise behavior and temporal fidelity establishes a theoretical basis for a quantitative evaluation of time-resolved reconstruction methods. Therefore, the presented theory allows for comparison between time-resolved parallel imaging methods and also nontime-resolved methods. Magn Reson Med, 2014. © 2014 Wiley Periodicals, Inc.

Usability and Acceptability of ASSESS MS: Assessment of Motor Dysfunction in Multiple Sclerosis Using Depth-Sensing Computer Vision

Background: Sensor-based recordings of human movements are becoming increasingly important for the assessment of motor symptoms in neurological disorders beyond rehabilitative purposes. ASSESS MS is a movement recording and analysis system being developed to automate the classification of motor dysfunction in patients with multiple sclerosis (MS) using depth-sensing computer vision. It aims to provide a more consistent and finer-grained measurement of motor dysfunction than currently possible. Objective: To test the usability and acceptability of ASSESS MS with health professionals and patients with MS. Methods: A prospective, mixed-methods study was carried out at 3 centers. After a 1-hour training session, a convenience sample of 12 health professionals (6 neurologists and 6 nurses) used ASSESS MS to capture recordings of standardized movements performed by 51 volunteer patients. Metrics for effectiveness, efficiency, and acceptability were defined and used to analyze data captured by ASSESS MS, video recordings of each examination, feedback questionnaires, and follow-up interviews. Results: All health professionals were able to complete recordings using ASSESS MS, achieving high levels of standardization on 3 of 4 metrics (movement performance, lateral positioning, and clear camera view but not distance positioning). Results were unaffected by patients’ level of physical or cognitive disability. ASSESS MS was perceived as easy to use by both patients and health professionals with high scores on the Likert-scale questions and positive interview commentary. ASSESS MS was highly acceptable to patients on all dimensions considered, including attitudes to future use, interaction (with health professionals), and overall perceptions of ASSESS MS. Health professionals also accepted ASSESS MS, but with greater ambivalence arising from the need to alter patient interaction styles. There was little variation in results across participating centers, and no differences between neurologists and nurses. Conclusions: In typical clinical settings, ASSESS MS is usable and acceptable to both patients and health professionals, generating data of a quality suitable for clinical analysis. An iterative design process appears to have been successful in accounting for factors that permit ASSESS MS to be used by a range of health professionals in new settings with minimal training. The study shows the potential of shifting ubiquitous sensing technologies from research into the clinic through a design approach that gives appropriate attention to the clinic environment.

Accuracy of conventional radiography and computed tomography in predicting implant position in relation to the vertebral canal in dogs.

OBJECTIVE To compare the accuracy of radiography and computed tomography (CT) in predicting implant position in relation to the vertebral canal in the cervical and thoracolumbar vertebral column. STUDY DESIGN In vitro imaging and anatomic study. ANIMALS Medium-sized canine cadaver vertebral columns (n=12). METHODS Steinmann pins were inserted into cervical and thoracolumbar vertebrae based on established landmarks but without predetermination of vertebral canal violation. Radiographs and CT images were obtained and evaluated by 6 individuals. A random subset of pins was evaluated for ability to distinguish left from right pins on radiographs. The ability to correctly identify vertebral canal penetration for all pins was assessed both on radiographs and CT. Spines were then anatomically prepared and visual examination of pin penetration into the canal served as the gold standard. RESULTS Left/right accuracy was 93.1%. Overall sensitivity of radiographs and CT to detect vertebral canal penetration by an implant were significantly different and estimated as 50.7% and 93.4%, respectively (P<.0001). Sensitivity was significantly higher for complete versus partial penetration and for radiologists compared with nonradiologists for both imaging modalities. Overall specificity of radiographs and CT to detect vertebral canal penetration was 82.9% and 86.4%, respectively (P=.049). CONCLUSIONS CT was superior to radiographic assessment and is the recommended imaging modality to assess penetration into the vertebral canal. CLINICAL RELEVANCE CT is significantly more accurate in identifying vertebral canal violation by Steinmann pins and should be performed postoperatively to assess implant position.