The role of reinfection and partner notification in the efficacy of Chlamydia screening programs

Repeated Chlamydia trachomatis infections after treatment are common. One reason is reinfection from untreated partners in ongoing sexual partnerships. Mathematical models that are used to predict the impact of screening on reducing chlamydia prevalence often do not incorporate reinfection and might overestimate the expected impact. We describe a pair compartmental model that explicitly incorporates sexual partnership duration and reinfection. The pair model predicts a weaker impact of screening when compared directly with a model that does not accommodate partnerships. Effective management of sex partners to prevent reinfection might need to be strengthened in chlamydia control programs.

Io volcano observer (IVO) integrated approach to optimizing system design for radiation challenges

One of the major challenges for a mission to the Jovian system is the radiation tolerance of the spacecraft (S/C) and the payload. Moreover, being able to achieve science observations with high signal to noise ratios (SNR), while passing through the high flux radiation zones, requires additional ingenuity on the part of the instrument provider. Consequently, the radiation mitigation is closely intertwined with the payload, spacecraft and trajectory design, and requires a systems-level approach. This paper presents a design for the Io Volcano Observer (IVO), a Discovery mission concept that makes multiple close encounters with Io while orbiting Jupiter. The mission aims to answer key outstanding questions about Io, especially the nature of its intense active volcanism and the internal processes that drive it. The payload includes narrow-angle and wide-angle cameras (NAC and WAC), dual fluxgate magnetometers (FGM), a thermal mapper (ThM), dual ion and neutral mass spectrometers (INMS), and dual plasma ion analyzers (PIA). The radiation mitigation is implemented by drawing upon experiences from designs and studies for missions such as the Radiation Belt Storm Probes (RBSP) and Jupiter Europa Orbiter (JEO). At the core of the radiation mitigation is IVO's inclined and highly elliptical orbit, which leads to rapid passes through the most intense radiation near Io, minimizing the total ionizing dose (177 krads behind 100 mils of Aluminum with radiation design margin (RDM) of 2 after 7 encounters). The payload and the spacecraft are designed specifically to accommodate the fast flyby velocities (e.g. the spacecraft is radioisotope powered, remaining small and agile without any flexible appendages). The science instruments, which collect the majority of the high-priority data when close to Io and thus near the peak flux, also have to mitigate transient noise in their detectors. The cameras use a combination of shielding and CMOS detectors with extremely fast readout to mi- imize noise. INMS microchannel plate detectors and PIA channel electron multipliers require additional shielding. The FGM is not sensitive to noise induced by energetic particles and the ThM microbolometer detector is nearly insensitive. Detailed SNR calculations are presented. To facilitate targeting agility, all of the spacecraft components are shielded separately since this approach is more mass efficient than using a radiation vault. IVO uses proven radiation-hardened parts (rated at 100 krad behind equivalent shielding of 280 mils of Aluminum with RDM of 2) and is expected to have ample mass margin to increase shielding if needed.

Radiological anatomy of the obturator nerve and its articular branches: basis to develop a method of radiofrequency denervation for hip joint pain

OBJECTIVE: A previous study of radiofrequency neurotomy of the articular branches of the obturator nerve for hip joint pain produced modest results. Based on an anatomical and radiological study, we sought to define a potentially more effective radiofrequency method. DESIGN: Ten cadavers were studied, four of them bilaterally. The obturator nerve and its articular branches were marked by wires. Their radiological relationship to the bone structures on fluoroscopy was imaged and analyzed. A magnetic resonance imaging (MRI) study was undertaken on 20 patients to determine the structures that would be encountered by the radiofrequency electrode during different possible percutaneous approaches. RESULTS: The articular branches of the obturator nerve vary in location over a wide area. The previously described method of denervating the hip joint did not take this variation into account. Moreover, it approached the nerves perpendicularly. Because optimal coagulation requires electrodes to lie parallel to the nerves, a perpendicular approach probably produced only a minimal lesion. In addition, MRI demonstrated that a perpendicular approach is likely to puncture femoral vessels. Vessel puncture can be avoided if an oblique pass is used. Such an approach minimizes the angle between the target nerves and the electrode, and increases the likelihood of the nerve being captured by the lesion made. Multiple lesions need to be made in order to accommodate the variability in location of the articular nerves. CONCLUSIONS: The method that we described has the potential to produce complete and reliable nerve coagulation. Moreover, it minimizes the risk of penetrating the great vessels. The efficacy of this approach should be tested in clinical trials.

Implementation of MET/CBT 5 for adolescents

Implementation of effective substance abuse treatment programs in community settings is a high priority. The selection of a proven cost-effective model is a first step; however, difficulty arises when the model is imported into a community setting. The Center on Substance Abuse Treatment selected a brief substance abuse treatment program for adolescents, the MET/CBT-5 program, determined to be the most cost-effective protocol in the Cannabis Youth Treatment trial, for implementation in two cohorts of Effective Adolescent Treatment grantees. A qualitative investigation of the protocol implementation with nine sites in the second cohort chronicled adaptations made by grantees and prospects for sustainability. The study found that agencies introduced adaptations without seeming to be aware of potential effects on validity. In most sites, sessions were lengthened or added to accommodate individual client needs, address barriers to client participation, and provide consistency with current norms of treatment. Implications for fidelity of future implementation projects are addressed.

The state of in vitro science for use in bioaccumulation assessments for fish

Through the concerted evaluations of thousands of commercial substances for the qualities of persistence, bioaccumulation, and toxicity as a result of the United Nations Environment Program's Stockholm Convention, it has become apparent that fewer empirical data are available on bioaccumulation than other endpoints and that bioaccumulation models were not designed to accommodate all chemical classes. Due to the number of chemicals that may require further assessment, in vivo testing is cost prohibitive and discouraged due to the large number of animals needed. Although in vitro systems are less developed and characterized for fish, multiple high-throughput in vitro assays have been used to explore the dietary uptake and elimination of pharmaceuticals and other xenobiotics by mammals. While similar processes determine bioaccumulation in mammalian species, a review of methods to measure chemical bioavailability in fish screening systems, such as chemical biotransformation or metabolism in tissue slices, perfused tissues, fish embryos, primary and immortalized cell lines, and subcellular fractions, suggest quantitative and qualitative differences between fish and mammals exist. Using in vitro data in assessments for whole organisms or populations requires certain considerations and assumptions to scale data from a test tube to a fish, and across fish species. Also, different models may incorporate the predominant site of metabolism, such as the liver, and significant presystemic metabolism by the gill or gastrointestinal system to help accurately convert in vitro data into representative whole-animal metabolism and subsequent bioaccumulation potential. The development of animal alternative tests for fish bioaccumulation assessment is framed in the context of in vitro data requirements for regulatory assessments in Europe and Canada.

The Effect of Open-Irrigated Radiofrequency Catheter Ablation of Atrial Fibrillation on Left Atrial Pressure and B-Type Natriuretic Peptide

Background Open-irrigated radiofrequency catheter ablation (oiRFA) of atrial fibrillation (AF) imposes a volume load and risk of pulmonary edema. We sought to assess the effect of volume administration during ablation on left atrial (LA) pressure and B-type natriuretic peptide (BNP). Methods LA pressure was measured via transseptal sheath at the beginning and end of 44 LA ablation procedures in 42 patients. BNP plasma levels were measured before and after 10 procedures. Results A median of 3,255 (interquartile range [IQR], 2,014)-mL saline was administered during the procedure. During LA ablation, the median fluid balance was +1,438 (IQR, 1,109) mL and LA pressure increased by median 3.7 (IQR, 5.9) mm Hg (P < 0.001). LA pressure did not change in the 19 procedures with furosemide administration (median ΔP = −0.3 [IQR, 7.1] mm Hg, P = 0.334). The correlation of LA pressure and fluid balance was weak (rs = 0.383, P = 0.021). BNP decreased in all four procedures starting in AF or atrial tachycardia and then converting to sinus rhythm (P = 0.068), and increased in all six procedures starting and finishing in sinus rhythm (P = 0.028). After ablation, symptomatic volume overload responding to diuresis occurred in three patients. Conclusions A substantial intravascular volume load during oiRFA can be absorbed with little change in LA pressure, such that LA pressure is not a reliable indicator of the fluid balance. Subsequent redistribution of the volume load imposes a risk after the procedure. Conversion to sinus rhythm may improve ability to acutely accommodate the volume load.

Statistical model-based segmentation of the proximal femur in digital antero-posterior (AP) pelvic radiographs.

PURPOSE    Segmentation of the proximal femur in digital antero-posterior (AP) pelvic radiographs is required to create a three-dimensional model of the hip joint for use in planning and treatment. However, manually extracting the femoral contour is tedious and prone to subjective bias, while automatic segmentation must accommodate poor image quality, anatomical structure overlap, and femur deformity. A new method was developed for femur segmentation in AP pelvic radiographs. METHODS    Using manual annotations on 100 AP pelvic radiographs, a statistical shape model (SSM) and a statistical appearance model (SAM) of the femur contour were constructed. The SSM and SAM were used to segment new AP pelvic radiographs with a three-stage approach. At initialization, the mean SSM model is coarsely registered to the femur in the AP radiograph through a scaled rigid registration. Mahalanobis distance defined on the SAM is employed as the search criteria for each annotated suggested landmark location. Dynamic programming was used to eliminate ambiguities. After all landmarks are assigned, a regularized non-rigid registration method deforms the current mean shape of SSM to produce a new segmentation of proximal femur. The second and third stages are iteratively executed to convergence. RESULTS    A set of 100 clinical AP pelvic radiographs (not used for training) were evaluated. The mean segmentation error was [Formula: see text], requiring [Formula: see text] s per case when implemented with Matlab. The influence of the initialization on segmentation results was tested by six clinicians, demonstrating no significance difference. CONCLUSIONS    A fast, robust and accurate method for femur segmentation in digital AP pelvic radiographs was developed by combining SSM and SAM with dynamic programming. This method can be extended to segmentation of other bony structures such as the pelvis.

Trade Governance in the Digital Age (Preface)

The development of new digital technologies has resulted in significant transformations in daily life, from the arrival of online shopping to more fundamental changes in the ways we work and communicate. Many of these changes raise questions that transcend market access and liberalisation and demand cooperation and coherent regulatory design. International trade regulation has hitherto not reacted in a forward-looking manner to the digital revolution; particularly at the multilateral level, legal engineering has yielded few tangible results. This book examines whether WTO laws possess the necessary flexibility and resilience to accommodate the changes brought about by burgeoning digital trade. By revealing both the potential and the limitations of the WTO framework, it provides a broad picture of the interaction between digital technologies and trade regulation, links the often disconnected discourses of international trade law, intellectual property and cyberlaw, and explores discrete problems in different domains of global trade regulation.

Diagnosis and Treatment of Venous Malformations Consensus Document of the International Union of Phlebology (IUP): updated 2013

Venous malformations (VMs) are the most common vascular developmental anomalies (birth defects) . These defects are caused by developmental arrest of the venous system during various stages of embryogenesis. VMs remain a difficult diagnostic and therapeutic challenge due to the wide range of clinical presentations, unpredictable clinical course, erratic response to the treatment with high recurrence/persistence rates, high morbidity following non-specific conventional treatment, and confusing terminology. The Consensus Panel reviewed the recent scientific literature up to the year 2013 to update a previous IUP Consensus (2009) on the same subject. ISSVA Classification with special merits for the differentiation between the congenital vascular malformation (CVM) and vascular tumors was reinforced with an additional review on syndrome-based classification. A "modified" Hamburg classification was adopted to emphasize the importance of extratruncular vs. truncular sub-types of VMs. This incorporated the embryological origin, morphological differences, unique characteristics, prognosis and recurrence rates of VMs based on this embryological classification. The definition and classification of VMs were strengthened with the addition of angiographic data that determines the hemodynamic characteristics, the anatomical pattern of draining veins and hence the risk of complication following sclerotherapy. The hemolymphatic malformations, a combined condition incorporating LMs and other CVMs, were illustrated as a separate topic to differentiate from isolated VMs and to rectify the existing confusion with name-based eponyms such as Klippel-Trenaunay syndrome. Contemporary concepts on VMs were updated with new data including genetic findings linked to the etiology of CVMs and chronic cerebrospinal venous insufficiency. Besides, newly established information on coagulopathy including the role of D-Dimer was thoroughly reviewed to provide guidelines on investigations and anticoagulation therapy in the management of VMs. Congenital vascular bone syndrome resulting in angio-osteo-hyper/hypotrophy and (lateral) marginal vein was separately reviewed. Background data on arterio-venous malformations was included to differentiate this anomaly from syndrome-based VMs. For the treatment, a new section on laser therapy and also a practical guideline for follow up assessment were added to strengthen the management principle of the multidisciplinary approach. All other therapeutic modalities were thoroughly updated to accommodate a changing concept through the years.

Should There Be New Multilateral Rules for Digital Trade?

The Internet revolution and the digital environment have spurred a significant amount of innovative activity that has had spillover effects on many sectors of the economy. For a growing group of countries – both developed and developing – digital goods and services have become an important engine of economic growth and a clear priority in their future-oriented economic strategies. Neither the rapid technological developments associated with digitization, nor their increased societal significance have so far been reflected in international economic law in a comprehensive manner. The law of the World Trade Organization (WTO) in particular, has not reacted in any proactive manner. A pertinent question that arises is whether the WTO rules are still useful and able to accommodate the new digital economy or whether they have been rendered outdated and incapable of dealing with this important development? The present think-piece seeks answers to these questions and maps the key issues and challenges which the WTO faces. In appraisal of the current state of affairs, developments in venues other than the WTO, and proposals tabled by stakeholders, some recommendations for the ways forward are made.

The Forensic Reference Phantom-a new tool for quality assurance of attenuation measurements in forensic radiology

Introduction The purpose of this paper is to present the technical specifications of the Forensic Reference Phantom (FRP), to test its behavior relative to organic test materials, and discuss potential applications of the phantom in forensic radiology. Materials and method The FRP prototype is made of synthetic materials designed to simulate the computed tomography (CT) attenuation of water. It has six bore holes that accommodate multiuse containers. These containers were filled with test materials and scanned at 80 kVp, 120 kVp, and 140 kVp. X-ray attenuation was measured by two readers. Intra- and inter-reader reliability was assessed using the intra-class correlation coefficient (ICC). Significance levels between mean CT numbers at 80 kVp, 120 kVp, and 140 kVp were assessed with the Friedman-test. The T-test was used to assess significance levels between the FRP and water. Results Overall mean CT numbers ranged from −3.0–3.7HU for the FRP; −1000.3–−993.5HU for air; −157.7– −108.1HU for oil; 35.5–42.0HU for musle tissue; and 1301.5–2354.8HU for cortical bone. Inter-reader and intra-reader reliability were excellent (ICC>0.994; and ICC=0.999 respectively). CT numbers were significantly different at different energy levels. There was no significant difference between the attenuation of the FRP and water. Conclusions The FRP is a new tool for quality assurance and research in forensic radiology. The mean CT attenuation of the FRP is equivalent to water. The phantom can be scanned during routine post-mortem CT to assess the composition of unidentified objects. In addition, the FRP may be used to investigate new imaging algorithms and scan protocols in forensic radiology.

Context-Aware Adaptive Opportunistic Routing in Mobile Ad-hoc and Sensor Networks

Mobile ad-hoc networks (MANETs) and wireless sensor networks (WSNs) have been attracting increasing attention for decades due to their broad civilian and military applications. Basically, a MANET or WSN is a network of nodes connected by wireless communication links. Due to the limited transmission range of the radio, many pairs of nodes in MANETs or WSNs may not be able to communicate directly, hence they need other intermediate nodes to forward packets for them. Routing in such types of networks is an important issue and it poses great challenges due to the dynamic nature of MANETs or WSNs. On the one hand, the open-air nature of wireless environments brings many difficulties when an efficient routing solution is required. The wireless channel is unreliable due to fading and interferences, which makes it impossible to maintain a quality path from a source node to a destination node. Additionally, node mobility aggravates network dynamics, which causes frequent topology changes and brings significant overheads for maintaining and recalculating paths. Furthermore, mobile devices and sensors are usually constrained by battery capacity, computing and communication resources, which impose limitations on the functionalities of routing protocols. On the other hand, the wireless medium possesses inherent unique characteristics, which can be exploited to enhance transmission reliability and routing performance. Opportunistic routing (OR) is one promising technique that takes advantage of the spatial diversity and broadcast nature of the wireless medium to improve packet forwarding reliability in multihop wireless communication. OR combats the unreliable wireless links by involving multiple neighboring nodes (forwarding candidates) to choose packet forwarders. In opportunistic routing, a source node does not require an end-to-end path to transmit packets. The packet forwarding decision is made hop-by-hop in a fully distributed fashion. Motivated by the deficiencies of existing opportunistic routing protocols in dynamic environments such as mobile ad-hoc networks or wireless sensor networks, this thesis proposes a novel context-aware adaptive opportunistic routing scheme. Our proposal selects packet forwarders by simultaneously exploiting multiple types of cross-layer context information of nodes and environments. Our approach significantly outperforms other routing protocols that rely solely on a single metric. The adaptivity feature of our proposal enables network nodes to adjust their behaviors at run-time according to network conditions. To accommodate the strict energy constraints in WSNs, this thesis integrates adaptive duty-cycling mechanism to opportunistic routing for wireless sensor nodes. Our approach dynamically adjusts the sleeping intervals of sensor nodes according to the monitored traffic load and the estimated energy consumption rate. Through the integration of duty cycling of sensor nodes and opportunistic routing, our protocol is able to provide a satisfactory balance between good routing performance and energy efficiency for WSNs.

The role of brand marketing in snowboarding: A comparative study of Switzerland and New Zealand

Introduction: Brands play an essential role in the organizational structure of snowboarding by sponsoring athletes, arranging events, contributing to product development and developing long-term partnerships with other key actors. However, the specialities of their role in scene sports, such as creating identities, networking and brand marketing strategies, have not been extensively researched. This study aims to provide an analysis of the function of brands within the snowboarding subculture by comparing how the sport is organized in Switzerland and New Zealand. Sociological theories of subcultures (Hitzler & Niederbacher, 2010) and social networks (Stegbauer, 2008) are used to defi ne the structures of the sport, whereas marketing and branding theories (Adjouri & Stastny, 2006) help to understand the role of the brands. Snowboarding will be defi ned as an alternative sports subculture based on characteristics such as aesthetics, adventure and new resources of performance (Schwier, 2006). Such a defi nition also begs for a novel form of analyzing its organization. Unlike more conventional structures, the organization of snowboarding allows a variety of actors to get involved in leading the sport. By portraying and encouraging differentiated identities and lifestyles, athletes provide a space for other actors to fi nd their place within the sport (Wheaton, 2005). According to Stegbauers network theory, individual actors are able to obtain high positions and defi ne their identity depending on their ties to actors and networks within the subculture (Stegbauer, 2008). For example, social capital, contacts within the sport and insider knowledge on subculture-related information enable actors to get closer to the core (Hitzler & Niederbacher, 2010). Actors who do not have close networks and allies within the subculture are less likely to engage successfully in the culture, whether as an individual or as a commercial actor (Thorpe, 2011). This study focuses on the organizational structure of snowboarding by comparing the development of the sport in Switzerland and New Zealand. An analysis of snowboarding in two nations with diverse cultures and economic systems allows a further defi nition of the structural organization of the sport and explains how brands play an important role in the sport. Methods: The structural organization of the sport will be analyzed through an ethnographic approach, using participant observation at various leading events in Switzerland (Freestyle.ch, European Open) and New Zealand (World Heli Challenge, New Zealand Open, New Zealand Winter Games). The data is analyzed using grounded theory (Glaser & Strauss 1967) and gives an overview of the actors that are playing an important role in the local development of snowboarding. Participant observation was also used as a tool to get inside the sport culture and opened up the possibility to make over 40 semi-structured qualitative expert interviews with international core actors from 11 countries. Obtaining access to one actor as a partner early on helped to get inside the local sport culture. The ‘snowball effect’ allowed the researcher to acquire access, build trust and conduct interviews with experts within the core scene. All the interviewed actors have a direct infl uence on the sport in one or both countries, which permit a cross-analysis. The data of the interviews was evaluated through content analysis (Mayring 2010). The two methods together provided suffi cient data to analyze the organizational structure and discuss the role of brand marketing within snowboarding. Results: An actors mapping by means of a center-periphery framework has identifi ed fi ve main core groups: athletes, media representatives, brand-marketing managers, resort managers and event organizers. In both countries the same grouping of actors were found. Despite possessing different and frequently multiple roles and responsibilities, core actors appear to have a strong common identifi cation as ‘snowboarders’, are considered to be part of the organizational elite of the sport and tend to advocate similar goals. The author has found that brands in Switzerland tend to have a larger impact on the broader snowboarding culture due to a number of factors discussed below. Due to a larger amount of snowboarders and stronger economic power in Europe, snowboarders are making attempts to differentiate themselves from other winter sports, while competing with each other to develop niche markets. In New Zealand, on the other hand, the smaller market enables more cooperation and mutual respect within snowboarders. Further they are more closely linked to other winter sports and are satisfi ed with being lumped together. In both countries, brands have taken up the role of supporting young athletes, organizing competitions and feeding media with subculture-related content. Brands build their image and identity through the collaboration with particular athletes who can represent the values of the brand. Local and global communities with similar lifestyles and interests are being built around brands that share a common vision of the sport. The dominance of brands in snowboarding has enabled them with the power to organize and rule the sport through its fan base and supporters. Brands were defi ned by interviewees as independent institutions led by insiders who know the codes and symbols of the sport and were given trust and credibility. The brands identify themselves as the engines of the sport by providing the equipment, opportunities for athletes to get exposure, allowing media to get exclusive information on activities, events and sport-related stories. Differences between the two countries are more related to the economic system. While Switzerland is well integrated in the broader European market, New Zealand’s geographical isolation and close proximity to Australia tends to limit its market. Further, due to different cultural lifestyles, access to resorts and seasonal restrictions, to name a few, the amount of people practicing winter sports in New Zealand is much smaller than in Switzerland. However, this also presents numerous advantages. For example, the short southern hemisphere winter season in New Zealand enables them to attract international sports athletes, brands and representatives in a period when Europe and North America is in summer. Further, the unique snow conditions in New Zealand and majestic landscape is popular for attracting world renowned photo- and cinematographers. Another advantage is the less populated network as it provides the opportunity for individuals to gain easier access to the core of the sport, obtain diverse positions and form a unique identity and market. In Switzerland, on the other hand, the snowboarding network is dense with few positions available for the taking. Homegrown brands with core recognition are found in both countries. It was found that the Swiss brands tend to have a larger impact on the market, whereas in New Zealand, the sport is more dependent on import products by foreign brands. Further, athletes, events and resorts in New Zealand are often dependent on large brand sponsorships from abroad such as from brand headquarters in the Unites States. Thus, due to its location in the centre of Europe, Swiss brands can take advantage of brands which are closer in proximity and culture to sponsor athletes and events. In terms of media coverage, winter sports in New Zealand tend to have a minor coverage and tradition in local mass media, which leads to less exposure, recognition and investment into the sport. This is also related to how snowboarding is more integrated into other winter sports in New Zealand. Another difference is the accessibility of the ski resort by the population. While in Switzerland the resorts are mostly being visited by day-travelers, ‘weekend warriors’ and holiday makers, the location of the resorts in New Zealand make it diffi cult to visit for one day. This is in part due to the fact that Swiss ski resorts and villages are usually the same location and are accessible through public transportation, while the ski resorts in New Zealand have been built separately from the villages. Further, the villages have not been built to accommodate to high tourist arrivals. Thus, accommodation and food facilities are limited and there is a lack of public transportation to the resorts. Discussion: The fi ndings show that networks and social relations combined with specifi c knowledge on scene-related attributes are crucial in obtaining opportunities within the sport. Partnerships as well as competition between these different actors are necessary for core acceptance, peer credibility and successful commercial interests. Brands need to maintain effective marketing strategies and identities which incorporate subcultural forms of behavior and communication. In order to sustain credibility from its fans, athletes and other snowboarding actors, brands need to maintain their insider status through social networks and commercial branding strategies. The interaction between all actors is a reciprocated process, where social capital, networks and identities are being shared. While the overall structure of snowboard subcultures in Europe and New Zealand are similar, there are some distinct characteristics which make each one unique. References Adjouri, N. & Stastny, P. (2006). Sport-Branding: Mit Sport-Sponsoring zum Markenerfolg. Wiesbaden: Gabler. Glaser, B. & Strauss, K. (1967). The discovery of grounded theory: Strategies for qualitative research. Chicago: Aldine. Hebdige, D. (2009). Subculture; The meaning of style. New York: Routledge. Hitzler, R. & Niederbacher, A. (2010). Leben in Szenen: Formen juveniler Vergemeinschaftung heute. Wiesbaden: Verlag für Sozialwissenschaften. Mayring, P. (2010). Qualitative Inhaltsanalyse: Grundlagen und Techniken. Weinheim: Beltz. Schwier, J. (2006). Repräsentationen des Trendsports. Jugendliche Bewegungskulturen, Medien und Marketing. In: Gugutzer, R. (Hrsg.). body turn. Perspektiven der Soziologie des Körpers und des Sports. Bielefeld: transcript (S. 321-340). Stegbauer, C. (2008). Netzwerkanalyse und Netzwerktheorie. Ein neues Paradigma in den Sozialwissenschaften. Wiesbaden: VS Verlag für Sozialwissenschaften. Thorpe, H. (2011). Snowboarding bodies in theory and practice. Basingstoke: Palgrave Macmillan. Wheaton, B. (2005). Understanding lifestyle sports; consumption, identity and difference. New York: Routledge.

Experimenting and modeling: sharp distinctions, integration or just a mess?

At first sight, experimenting and modeling form two distinct modes of scientific inquiry. This spurs philosophical debates about how the distinction should be drawn (e.g. Morgan 2005, Winsberg 2009, Parker 2009). But much scientific practice casts serious doubts on the idea that the distinction makes much sense. There are two worries. First, the practices of modeling and experimenting are often intertwined in intricate ways because much modeling involves experimenting, and the interpretation of many experiments relies upon models. Second, there are borderline cases that seem to blur the distinction between experiment and model (if there is any). My talk tries to defend the philosophical project of distinguishing models from experiment and to advance the related philosophical debate. I begin with providing a minimalist framework of conceptualizing experimenting and modeling and their mutual relationships. The methods are conceptualized as different types of activities that are characterized by a primary goal, respectively. The minimalist framwork, which should be uncontroversial, suffices to accommodate the first worry. I address the second worry by suggesting several ways how to conceptualize the distinction in a more flexible way. I make a concrete suggestion of how the distinction may be drawn. I use examples from the history of science to argue my case. The talk concentrates and models and experiments, but I will comment on simulations too.