Aortic arch morphometry in living humans

Anatomical features of the aortic arch such as its steepness, the take-off angles and the distances between its supra-aortic branches can influence the feasibility and difficulty of interventional and/or surgical maneuvers. These anatomical characteristics were assessed by means of 3D multiplanar reconstruction of thoracic angio-computed tomography scans of 92 living patients (79 males, 13 females, mean age 69.4 ± 9.9 years) carried out for various indications (gross pathology of the thoracic aorta excluded). There was a significant variation of all measured parameters between the subjects - a standard aortic arch (i.e. with all measured parameters within 2 SD) does not seem to exist. There were no significant differences between genders but some of the parameters correlated significantly to age.

Liulin silicon semiconductor spectrometers as cosmic ray monitors at the high mountain observatories Jungfraujoch and Lomnický stit

Currently, most cosmic ray data are obtained by detectors on satellites, aircraft, high-altitude balloons and ground (neutron monitors). In our work, we examined whether Liulin semiconductor spectrometers (simple silicon planar diode detectors with spectrometric properties) located at high mountain observatories could contribute new information to the monitoring of cosmic rays by analyzing data from selected solar events between 2005 and 2013. The decision thresholds and detection limits of these detectors placed at Jungfraujoch (Switzerland; 3475 m a.s.l.; vertical cut-off rigidity 4.5 GV) and Lomnicky stıt (Slovakia; 2633 m a.s.l.; vertical cut-off rigidity 3.84 GV) highmountain observatories were determined. The data showed that only the strongest variations of the cosmic ray flux in this period were detectable. The main limitation in the performance of these detectors is their small sensitive volume and low sensitivity of the PIN photodiode to neutrons.

Temporal association between childhood leukaemia and population growth in Swiss municipalities.

The population mixing hypothesis proposes that childhood leukaemia (CL) might be a rare complication of a yet unidentified subclinical infection. Large population influxes into previously isolated rural areas may foster localised epidemics of the postulated infection causing a subsequent increase of CL. While marked population growth after a period of stability was central to the formulation of the hypothesis and to the early studies on population mixing, there is a lack of objective criteria to define such growth patterns. We aimed to determine whether periods of marked population growth coincided with increases in the risk of CL in Swiss municipalities. We identified incident cases of CL aged 0-15 years for the period 1985-2010 from the Swiss Childhood Cancer Registry. Annual data on population counts in Swiss municipalities were obtained for 1980-2010. As exposures, we defined (1) cumulative population growth during a 5-year moving time window centred on each year (1985-2010) and (2) periods of 'take-off growth' identified by segmented linear regression. We compared CL incidence across exposure categories using Poisson regression and tested for effect modification by degree of urbanisation. Our study included 1500 incident cases and 2561 municipalities. The incident rate ratio (IRR) comparing the highest to the lowest quintile of 5-year population growth was 1.18 (95 % CI 0.96, 1.46) in all municipalities and 1.33 (95 % CI 0.93, 1.92) in rural municipalities (p value interaction 0.36). In municipalities with take-off growth, the IRR comparing the take-off period (>6 % annual population growth) with the initial period of low or negative growth (<2 %) was 2.07 (95 % CI 0.95, 4.51) overall and 2.99 (1.11, 8.05) in rural areas (p interaction 0.52). Our study provides further support for the population mixing hypothesis and underlines the need to distinguish take-off growth from other growth patterns in future research.

The Long-Run Phillips Curve: A Structural VAR Investigation

Both cointegration methods, and non-cointegrated structural VARs identified based on either long-run restrictions, or a combination of long-run and sign restrictions, are used in order to explore the long-run trade-off between inflation and the unemployment rate in the post-WWII U.S., U.K., Euro area, Canada, and Australia. Overall, neither approach produces clear evidence of a non-vertical trade-off. The extent of uncertainty surrounding the estimates is however substantial, thus implying that a researcher holding alternative priors about what a reasonable slope of the long-run trade-off might be will likely not see her views falsified

Development and validation of GT3X accelerometer cut-off points in 5- to 9-year-old children based on indirect calorimetry measurements

The ActiGraph accelerometer is commonly used to measure physical activity in children. Count cut-off points are needed when using accelerometer data to determine the time a person spent in moderate or vigorous physical activity. For the GT3X accelerometer no cut-off points for young children have been published yet. The aim of the current study was thus to develop and validate count cut-off points for young children. Thirty-two children aged 5 to 9 years performed four locomotor and four play activities. Activity classification into the light-, moderate- or vigorous-intensity category was based on energy expenditure measurements with indirect calorimetry. Vertical axis as well as vector magnitude cut-off points were determined through receiver operating characteristic curve analyses with the data of two thirds of the study group and validated with the data of the remaining third. The vertical axis cut-off points were 133 counts per 5 sec for moderate to vigorous physical activity (MVPA), 193 counts for vigorous activity (VPA) corresponding to a metabolic threshold of 5 MET and 233 for VPA corresponding to 6 MET. The vector magnitude cut-off points were 246 counts per 5 sec for MVPA, 316 counts for VPA - 5 MET and 381 counts for VPA - 6 MET. When validated, the current cut-off points generally showed high recognition rates for each category, high sensitivity and specificity values and moderate agreement in terms of the Kappa statistic. These results were similar for vertical axis and vector magnitude cut-off points. The current cut-off points adequately reflect MVPA and VPA in young children. Cut-off points based on vector magnitude counts did not appear to reflect the intensity categories better than cut-off points based on vertical axis counts alone.

Local Perceptions and Vertical Perspectives of a Large Scale Land Acquisition Project in Northern Sierra Leone

Despite increased scientific interest in the phenomenon of large-scale land acquisitions (LSLA), accurate data on implementation processes remain sparse. This paper aims at filling this gap by providing empirical in-depth knowledge on the case of the Swiss-based Addax Bioenergy Ltd. in Sierra Leone. Extensive fieldwork allowed the interdisciplinary research team 1) the identification of different actors that are necessary for the implementation on a vertical level and 2) the documentation of the heterogeneous group of project affected people’s perceptions and strategies on a horizontal level. Findings reveal that even a project labeled as best-practice example by UN agencies triggers a number of problematic processes for affected communities. The loss of natural resources that comes along with the land lease and the lack of employment possibilities mostly affects already vulnerable groups. On the other hand, strategies and resistance of local people also affect the project implementation. This shows that the horizontal and vertical levels are not separate entities. They are linked by social networks, social interactions, and means of communication and both levels take part in shaping the project’s impacts.

Benchmarking analogue models of brittle thrust wedges

We performed a quantitative comparison of brittle thrust wedge experiments to evaluate the variability among analogue models and to appraise the reproducibility and limits of model interpretation. Fifteen analogue modeling laboratories participated in this benchmark initiative. Each laboratory received a shipment of the same type of quartz and corundum sand and all laboratories adhered to a stringent model building protocol and used the same type of foil to cover base and sidewalls of the sandbox. Sieve structure, sifting height, filling rate, and details on off-scraping of excess sand followed prescribed procedures. Our analogue benchmark shows that even for simple plane-strain experiments with prescribed stringent model construction techniques, quantitative model results show variability, most notably for surface slope, thrust spacing and number of forward and backthrusts. One of the sources of the variability in model results is related to slight variations in how sand is deposited in the sandbox. Small changes in sifting height, sifting rate, and scraping will result in slightly heterogeneous material bulk densities, which will affect the mechanical properties of the sand, and will result in lateral and vertical differences in peak and boundary friction angles, as well as cohesion values once the model is constructed. Initial variations in basal friction are inferred to play the most important role in causing model variability. Our comparison shows that the human factor plays a decisive role, and even when one modeler repeats the same experiment, quantitative model results still show variability. Our observations highlight the limits of up-scaling quantitative analogue model results to nature or for making comparisons with numerical models. The frictional behavior of sand is highly sensitive to small variations in material state or experimental set-up, and hence, it will remain difficult to scale quantitative results such as number of thrusts, thrust spacing, and pop-up width from model to nature.