Curing capability of halogen and LED light curing units in deep class II cavities in extracted human molars

Class II cavities were prepared in extracted lower molars filled and cured in three 2-mm increments using a metal matrix. Three composites (Spectrum TPH A4, Ceram X mono M7 and Tetric Ceram A4) were cured with both the SmartLite PS LED LCU and the Spectrum 800 continuous cure halogen LCU using curing cycles of 10, 20 and 40 seconds. Each increment was cured before adding the next. After a seven-day incubation period, the composite specimens were removed from the teeth, embedded in self-curing resin and ground to half the orofacial width. Knoop microhardness was determined 100, 200, 500, 1000, 1500, 2500, 3500, 4500 and 5500 microm from the occlusal surface at a distance of 150 microm and 1000 microm from the metal matrix. The total degree of polymerization of a composite specimen for any given curing time and curing light was determined by calculating the area under the hardness curve. Hardness values 150 microm from the metal matrix never reached maximum values and were generally lower than those 1000 microm from the matrix. The hardest composite was usually encountered between 200 microm and 1000 microm from the occlusal surface. For every composite-curing time combination, there was an increase in microhardness at the top of each increment (measurements at 500, 2500 and 4500 microm) and a decrease towards the bottom of each increment (measurements at 1500, 3500 and 5500 microm). Longer curing times were usually combined with harder composite samples. Spectrum TPH composite was the only composite showing a satisfactory degree of polymerization for all three curing times and both LCUs. Multiple linear regression showed that only the curing time (p < 0.001) and composite material (p < 0.001) had a significant association with the degree of polymerization. The degree of polymerization achieved by the LED LCU was not significantly different from that achieved by the halogen LCU (p = 0.54).

Der Capability-Ansatz in der Gesundheitsförderung: Ansatzpunkte für eine Neuausrichtung der Ungleichheitsforschung

Gesundheitliches Wohlergehen geht unmittelbar auf das aktive Zutun von Personen und Kollektiven zurück. Zugleich wird gesundheitsrelevantes Handeln nur unter der Berücksichtigung der jeweiligen physischen und sozialen Kontexte zu verstehen und zu beeinflussen sein. Dementsprechend wird hier eine Ausrichtung der modernen Gesundheitsforderung auf die gesundheitsrelevanten Ressourcen und Handlungsspielräume der Menschen vorgeschlagen. Hierfür sind theoretische Grundlagen erforderlich, die die Fragen der sozialen Ungleichheit mit den praktischen Zugängen des Empowerment und der Partizipation schlüssig verbinden. Die Autoren stellen dazu den Capability-Approach (CA) von Amartya Sen vor und ergänzsa diesen mit Erkenntnissen aus der Kapital-Interaktionstheorie von Pierre Bourdieu. Beide Ansätze beleuchten Grundfragen der sozialen Ungleichheit und können mit den Leitkonzepten der Ottawa-Charta fruchtbar verbunden werden. Sie liefern damit auch Anleitungen für neue Forschungsrichtungen zur Untersuchung der komplexen Wechselwirkungen von sozialen Kontexten und gesundheitsrelevantem Handeln.

Capability of a space-based space surveillance system to detect and track objects in GEO, MEO and LEO orbits

In this paper we present the results from the coverage and the orbit determination accuracy simulations performed within the recently completed ESA study “Assessment Study for Space Based Space Surveillance (SBSS) Demonstration System” (Airbus Defence and Space consortium). This study consisted in investigating the capability of a space based optical sensor (SBSS) orbiting in low Earth orbit (LEO) to detect and track objects in GEO (geosynchronous orbit), MEO (medium Earth orbit) and LEO and to determinate and improve initial orbits from such observations. Space based systems may achieve better observation conditions than ground based sensors in terms of astrometric accuracy, detection coverage, and timeliness. The primary observation mode of the proposed SBSS demonstrator is GEO surveillance, i.e. the systematic search and detection of unknown and known objects. GEO orbits are specific and unique orbits from dynamical point of view. A space-based sensor may scan the whole GEO ring within one sidereal day if the orbit and pointing directions are chosen properly. For an efficient survey, our goal was to develop a leak-proof GEO fence strategy. Collaterally, we show that also MEO, LEO and other (GTO,Molniya, etc.) objects would be possible to observe by the system and for a considerable number of LEO objects to down to size of 1 cm we can obtain meaningful statistical data for improvement and validation of space debris environment models

Capability of E-Bike Tourism in Switzerland

AIM OF PAPER AND RESEARCH QUESTIONS The primary aim of this investigation was to examine, if tourism in Switzerland can be stimulated by focusing on e-bike offers. Switzerland is an attractive and manifold country for bike tourism. However, there are plenty of hilly and steep areas, where the topography is quite demanding and cycling is predestined to ambitious sportsperson. Less performance-oriented bike tourists are possibly discouraged by the challenges of the landscape. E-bikes seem to be a reasonable alterna-tive to enable less trained person to attend bike tours in steeper regions as well as to keep heterogeneous groups together. E-bikes are already popular in Switzerland for daily routes as the journey to work, but they are not very common in the tour-istic context. The presented investigation evaluates the current standing of supply and demand for e-bike tourism and asks for opportunities and threats in the future development. LITERTURE REVIEW The existing frameworks to analyse capability in the field of sport tourism are limited, because of the broad variation of sports and tourism types. Still several conceptions are valuable to evaluate the opportunities of e-bike tourism in Switzer-land. According to Higham and Hinch (2009) the potential of touristic products and destinations always depends on the interaction among the factors place, people and activity. Standeven and de Knop (1999) support this position by identify-ing the experience of place as a key component of the sport tourism experience. Bull (2005) assumes that place not only affects experience. In his opinion, the specific spatially located resources are even crucial for the existence of nature sports. He identifies four factors determining the attraction of touristic products or destination, as physical characteristics, accessibility and infrastructural arrangements, political and economic resources as well as cultural and perceptual aspects. Concerning the demand side (people) the contemporary research is guided by an individual psychological focus delivering mainly results about motives and the decision making process (e.g. Görtz & Hürten, 2011). RESEARCH DESIGN AND DATA ANALYSIS The presented study is based on a between method triangulation, consisting of qualitative interviews with important stake-holders on the supply side and a cross sectional survey on the demand side. Qualitative interviews were conducted with the first provider of touristic e-bike routes and with the manager of the leading e-bike rental company in Switzerland. The interviews were evaluated by qualitative content analysis according to Mayring (2008). The survey covered a randomized sample of 748 adult persons and focused on interests and needs of potential consumers. The concluding potentials analy-sis combined the results of the interviews and the survey with the findings of literature research. As central outcome the strengths, weaknesses, opportunities and threats were evaluated and presented by SWOT-analysis. RESULTS Results showed that the development of e-bike tourism in Switzerland was not initiated by tourism promoter, but by an innovative e-bike producer. However, also for the manufacturer the fit between landscape (place), product (activity) and visitors (people) was the crucial criterion. The first e-bike tours were offered in a demanding and rural region, in order that the experience of place was able to promote a positive overall experience. Due to the success of the first touristic e-bike products, several tourism regions started to extend their portfolio with e-bike offers. To date a nationwide network for signalised e-bike tours, rental stations and changing stations for rechargeable batteries is established. Despite the attractive offer, the demand is only moderate. The obtained results of the consumer survey pointed at a certain barrier to use e-bikes for tourism activities. The most substantial barrier is the missing affinity for bike tourism in general. Another notable group considering themselves as “fit enough for normal bike tourism”. Nevertheless 55% of the respondent are interested in tour-istic e-bike products. Looking only at people with e-bike tourism experience, even 92% are interested in further activities. DISCUSSION AN CONCLUSION The current study findings are encouraging because they suggest a superior suitability and an attractive level of e-bike tourism products in Switzerland. The results of the consumer survey indicate an increasing demand for e-bike tourism. The investigation also points at some risks, as the rivalry for bike tourism or the raised safety hazard because of the increased driving speed. Summing up, the results support the conclusion, that e-bike tourism will become more important in the com-ing years. However, to reach the goal relevant trends as the requirement for customised offers must be considered and marketing activities are supposed to be extended. REFERENCES Bull, C. (2005). Sport tourism resource analysis. In J. Higham (Ed.), Sport tourism destination: Issues, opportunities and analysis (pp. 25-38). Amsterdam: Elsevier Butterworth-Heinemann. Görtz, M., & D. Hürten (2011). Motive der Radurlauber, psychografische Merkmale und Reiseverhalten. In A. Dreyer, E. Miglbauer & R. Mühlnickel (Hrsg.), Radtourismus. Entwicklungen, Potenziale, Perspektiven (S. 36-43). München: Olden-bourg. Higham, J., & Hinch, T. (2009). Sport and Tourism. Globalization, Mobility and Identity. Amsterdam: Butterworth-Heinemann. Mayring, P. (2008). Qualitative Inhaltsanalyse. Grundlagen und Techniken (10. Aufl.). Weinheim: Beltz Verlag. Standeven, J., & De Knop, P. (1999). Sport Tourism. Campaign: Human Kinetics.

Angiopoietin-1 receptor Tie2 distinguishes multipotent differentiation capability in bovine coccygeal nucleus pulposus cells.

BACKGROUND The intervertebral disc (IVD) has limited self-healing potential and disc repair strategies require an appropriate cell source such as progenitor cells that could regenerate the damaged cells and tissues. The objective of this study was to identify nucleus pulposus-derived progenitor cells (NPPC) and examine their potential in regenerative medicine in vitro. METHODS Nucleus pulposus cells (NPC) were obtained from 1-year-old bovine coccygeal discs by enzymatic digestion and were sorted for the angiopoietin-1 receptor Tie2. The obtained Tie2- and Tie2+ fractions of cells were differentiated into osteogenic, adipogenic, and chondrogenic lineages in vitro. Colony-forming units were prepared from both cell populations and the colonies formed were analyzed and quantified after 8 days of culture. In order to improve the preservation of the Tie2+ phenotype of NPPC in monolayer cultures, we tested a selection of growth factors known to have stimulating effects, cocultured NPPC with IVD tissue, and exposed them to hypoxic conditions (2 % O2). RESULTS After 3 weeks of differentiation culture, only the NPC that were positive for Tie2 were able to differentiate into osteocytes, adipocytes, and chondrocytes as characterized by calcium deposition (p < 0.0001), fat droplet formation (p < 0.0001), and glycosaminoglycan content (p = 0.0095 vs. Tie2- NPC), respectively. Sorted Tie2- and Tie2+ subpopulations of cells both formed colonies; however, the colonies formed from Tie2+ cells were spheroid in shape, whereas those from Tie2- cells were spread and fibroblastic. In addition, Tie2+ cells formed more colonies in 3D culture (p = 0.011) than Tie2- cells. During expansion, a fast decline in the fraction of Tie2+ cells was observed (p < 0.0001), which was partially reversed by low oxygen concentration (p = 0.0068) and supplementation of the culture with fibroblast growth factor 2 (FGF2) (p < 0.0001). CONCLUSIONS Our results showed that the bovine nucleus pulposus contains NPPC that are Tie2+. These cells fulfilled formally progenitor criteria that were maintained in subsequent monolayer culture for up to 7 days by addition of FGF2 or hypoxic conditions. We propose that the nucleus pulposus represents a niche of precursor cells for regeneration of the IVD.