The moderating role of personal mastery on the relationship between caregiving status and multiple dimensions of fatigue

OBJECTIVE: A substantial proportion of chronically-stressed spousal dementia caregivers report fatigue. The objective of this study was to examine whether personal mastery moderates the relationship between caregiving status (caregiver/non-caregiver) and multiple dimensions of fatigue. METHODS: Seventy-three elderly Alzheimer's caregivers and 41 elderly non-caregivers completed the Multidimensional Fatigue Symptom Inventory-Short Form (MFSI-SF) and questionnaires assessing mastery. RESULTS: Regression analyses indicated that global fatigue was significantly higher for caregivers (M = 38.0 +/- 21.0) compared to non-caregivers (M = 18.2 +/- 10.4). However, personal mastery moderated the relation between caregiving status and global fatigue (t = -2.03, df = 107, p = 0.045), such that for those with low mastery, caregivers' fatigue scores were 18.1 points higher than non-caregivers, and for those with high mastery, this difference was only 7.5 points. For specific dimensions of fatigue, mastery moderated the relations between caregiving status and both emotional (t = -2.01, df = 107, p = 0.047) and physical (t = -2.51, df = 107, p = 0.014) fatigue. Specifically, association between caregiving status and emotional fatigue was greater when mastery was low than when mastery was high. Caregiving status was significantly associated with physical fatigue when mastery was low, but not when mastery was high. Significant main effects were found between mastery and general fatigue and vigor. CONCLUSION: Given the proportion of fatigued caregivers and the impact fatigue has on health; these findings provide important information regarding mastery's relationship with fatigue and may inform interventions aiming to alleviate fatigue in caregivers. Copyright (c) 2009 John Wiley ; Sons, Ltd.

The effect of a tin-containing fluoride mouth rinse on the bond between resin composite and erosively demineralised dentin

OBJECTIVES To evaluate the effect of a tin-containing fluoride (Sn/F) mouth rinse on microtensile bond strength (μTBS) between resin composite and erosively demineralised dentin. MATERIALS AND METHODS Dentin of 120 human molars was erosively demineralised using a 10-day cyclic de- and remineralisation model. For 40 molars, the model comprised erosive demineralisation only; for another 40, the model included treatment with a NaF solution; and for yet another 40, the model included treatment with a Sn/F mouth rinse. In half of these molars (n = 20), the demineralised organic matrix was continuously removed by collagenase. Silicon carbide paper-ground, non-erosively demineralised molars served as control (n = 20). Subsequently, μTBS of Clearfil SE/Filtek Z250 to the dentin was measured, and failure mode was determined. Additionally, surfaces were evaluated using SEM and EDX. RESULTS Compared to the non-erosively demineralised control, erosive demineralisation resulted in significantly lower μTBS regardless of the removal of demineralised organic matrix. Treatment with NaF increased μTBS, but the level of μTBS obtained by the non-erosively demineralised control was only reached when the demineralised organic matrix had been removed. The Sn/F mouth rinse together with removal of demineralised organic matrix led to significantly higher µTBS than did the non-erosively demineralised control. The Sn/F mouth rinse yielded higher μTBS than did the NaF solution. CONCLUSIONS Treatment of erosively demineralised dentin with a NaF solution or a Sn/F mouth rinse increased the bond strength of resin composite. CLINICAL RELEVANCE Bond strength of resin composite to eroded dentin was not negatively influenced by treatment with a tin-containing fluoride mouth rinse.

Cohort Study on the Association Between Helmet Use and Traumatic Brain Injury in Snowboarders From a Swiss Tertiary Trauma Center.

BACKGROUND Since the introduction of helmets in winter sports there is on-going debate on whether they decrease traumatic brain injuries (TBI). METHODS This cohort study included 117 adult (≥ 16 years) snowboarders with TBI admitted to a level I alpine trauma center in Switzerland between 2000/2001 and 2010/2011. The primary objective was to examine the association between helmet use and moderate-to-severe TBI. Secondary objectives were to describe the epidemiology of TBI during the past decade in relation to increased helmet use. RESULTS Of 691 injured snowboarders evaluated, 117 (17%) suffered TBI. Sixty-six percent were men (median age, 23 years). Two percent of accidents were fatal. Ninety-two percent of patients sustained minor, 1% moderate, and 7% severe TBI according to the Glasgow coma scale. Pathologic computed tomography findings were present in 16% of patients, 26% of which required surgery. Eighty-three percent of TBIs occurred while riding on-slope. There was no trend in the TBI rate during the studied period, although helmet use increased from 10% to 69%. Comparing patients with and without a helmet showed no significant difference in odds ratios for the severity of TBI. However, of the 5 patients requiring surgery only 1 was wearing a helmet. Off-piste compared with on-slope snowboarders showed an odds ratio of 26.5 (P = 0.003) for sustaining a moderate-to-severe TBI. CONCLUSIONS Despite increased helmet use we found no decrease in TBI among snowboarders. The possibility of TBI despite helmet use and the dangers of riding off-piste should be a focus of future prevention programs.

The role of the interplay between polymer architecture and bacterial surface properties on the microbial adhesion to polyoxazoline-based ultrathin films

Surface platforms were engineered from poly(L-lysine)-graft-poly(2-methyl-2-oxazoline) (PLL-g-PMOXA) copolymers to study the mechanisms involved in the non-specific adhesion of Escherichia coli (E. coli) bacteria. Copolymers with three different grafting densities (PMOXA chains/Lysine residue of 0.09, 0.33 and 0.56) were synthesized and assembled on niobia (Nb O ) surfaces. PLL-modified and bare niobia surfaces served as controls. To evaluate the impact of fimbriae expression on the bacterial adhesion, the surfaces were exposed to genetically engineered E. coli strains either lacking, or constitutively expressing type 1 fimbriae. The bacterial adhesion was strongly influenced by the presence of bacterial fimbriae. Non-fimbriated bacteria behaved like hard, charged particles whose adhesion was dependent on surface charge and ionic strength of the media. In contrast, bacteria expressing type 1 fimbriae adhered to the substrates independent of surface charge and ionic strength, and adhesion was mediated by non-specific van der Waals and hydrophobic interactions of the proteins at the fimbrial tip. Adsorbed polymer mass, average surface density of the PMOXA chains, and thickness of the copolymer films were quantified by optical waveguide lightmode spectroscopy (OWLS) and variable-angle spectroscopic ellipsometry (VASE), whereas the lateral homogeneity was probed by time-of-flight secondary ion mass spectrometry (ToF-SIMS). Streaming current measurements provided information on the charge formation of the polymer-coated and the bare niobia surfaces. The adhesion of both bacterial strains could be efficiently inhibited by the copolymer film only with a grafting density of 0.33 characterized by the highest PMOXA chain surface density and a surface potential close to zero.

A novel allele of FILAMENTOUS FLOWER reveals new insights on the link between inflorescence and floral meristem organization and flower morphogenesis

Background The Arabidopsis FILAMENTOUS FLOWER (FIL) gene encodes a YABBY (YAB) family putative transcription factor that has been implicated in specifying abaxial cell identities and thus regulating organ polarity of lateral organs. In contrast to double mutants of fil and other YAB genes, fil single mutants display mainly floral and inflorescence morphological defects that do not reflect merely a loss of abaxial identity. Recently, FIL and other YABs have been shown to regulate meristem organization in a non-cell-autonomous manner. In a screen for new mutations affecting floral organ morphology and development, we have identified a novel allele of FIL, fil-9 and characterized its floral and meristem phenotypes. Results The fil-9 mutation results in highly variable disruptions in floral organ numbers and size, partial homeotic transformations, and in defective inflorescence organization. Examination of meristems indicates that both fil-9 inflorescence and floral meristems are enlarged as a result of an increase in cell number, and deformed. Furthermore, primordia emergence from these meristems is disrupted such that several primordia arise simultaneously instead of sequentially. Many of the organs produced by the inflorescence meristems are filamentous, yet they are not considered by the plant as flowers. The severity of both floral organs and meristem phenotypes is increased acropetally and in higher growth temperature. Conclusions Detailed analysis following the development of fil-9 inflorescence and flowers throughout flower development enabled the drawing of a causal link between multiple traits of fil-9 phenotypes. The study reinforces the suggested role of FIL in meristem organization. The loss of spatial and temporal organization of fil-9 inflorescence and floral meristems presumably leads to disrupted cell allocation to developing floral organs and to a blurring of organ whorl boundaries. This disruption is reflected in morphological and organ identity aberrations of fil-9 floral organs and in the production of filamentous organs that are not perceived as flowers. Here, we show the role of FIL in reproductive meristem development and emphasize the potential of using fil mutants to study mersitem organization and the related effects on flower morphogenesis.

Impact of loading displacements on SLR-derived parameters and on the consistency between GNSS and SLR results

Displacements of the Earth’s surface caused by tidal and non-tidal loading forces are relevant in high-precision space geodesy. Some of the corrections are recommended by the international scientific community to be applied at the observation level, e.g., ocean tidal loading (OTL) and atmospheric tidal loading (ATL). Non-tidal displacement corrections are in general recommended not to be applied in the products of the International Earth Rotation and Reference Systems Service, in particular atmospheric non-tidal loading (ANTL), oceanic and hydrological non-tidal corrections. We assess and compare the impact of OTL, ATL and ANTL on SLR-derived parameters by reprocessing 12 years of SLR data considering and ignoring individual corrections. We show that loading displacements have an influence not only on station long-term stability, but also on geocenter coordinates, Earth Rotation Parameters, and satellite orbits. Applying the loading corrections reduces the amplitudes of annual signals in the time series of geocenter and station coordinates. The general improvement of the SLR station 3D coordinate repeatability when applying OTL, ATL and ANTL corrections are 19.5 %, 0.2 % and 3.3 % respectively, w.r.t. the solutions without loading corrections. ANTL corrections play a crucial role in the combination of optical (SLR) and microwave (GNSS, VLBI, DORIS) space geodetic observation techniques, because of the so-called Blue-Sky effect: SLR measurements can be carried out only under cloudless sky conditions—typically during high air pressure conditions, when the Earth’s crust is deformed, whereas microwave observations are weather-independent. Thus, applying the loading corrections at the observation level improves SLR-derived products as well as the consistency with microwave-based results. We assess the Blue-Sky effect on SLR stations and the consistency improvement between GNSS and SLR solutions when ANTL corrections are included. The omission of ANTL corrections may lead to inconsistencies between SLR and GNSS solutions of up to 2.5 mm for inland stations. As a result, the estimated GNSS–SLR coordinate differences correspond better to the local ties at the co-located stations when applying ANTL corrections.