Cost of low back pain in Switzerland in 2005

Low back pain (LBP) is the most prevalent health problem in Switzerland and a leading cause of reduced work performance and disability. This study estimated the total cost of LBP in Switzerland in 2005 from a societal perspective using a bottom-up prevalence-based cost-of-illness approach. The study considers more cost categories than are typically investigated and includes the costs associated with a multitude of LBP sufferers who are not under medical care. The findings are based on a questionnaire completed by a sample of 2,507 German-speaking respondents, of whom 1,253 suffered from LBP in the last 4 weeks; 346 of them were receiving medical treatment for their LBP. Direct costs of LBP were estimated at 2.6 billion and direct medical costs at 6.1% of the total healthcare expenditure in Switzerland. Productivity losses were estimated at 4.1 billion with the human capital approach and 2.2 billion with the friction cost approach. Presenteeism was the single most prominent cost category. The total economic burden of LBP to Swiss society was between 1.6 and 2.3% of GDP.

Geographic variation in the cost of ambulatory care in Switzerland

Swiss health care is relatively costly. In order better to understand the drivers of spending, this study analyses geographic variation in per capita consultation costs for ambulatory care.

Microhardness and marginal adaptation of pre-warmed composites

Objectives: The aim of this study was to examine the effect of pre-warmed composite on the microhardness and marginal adaptation. Methods: Ninety six identical class II cavities were prepared in extracted human molars and filled/cured in three 2 mm increments using a metal matrix. Two composites (Tetric Evo Ceram (IvoclarVivadent) and ELS(Saremco)) were cured with a LED curing unit (Bluephase (IvoclarVivadent)) using curing cycles of 20 and 40 seconds. The composite was used at room temperature or pre-warmed at 54.5ºC (Calset(AdDent)). Twelve teeth were filled for every composite-curing time-composite temperature combination. The teeth were thermocycled (1000 cycles at 5º and 55ºC) and then stored at 37° C for seven days . Dye penetration (basic fuchsine 5% for 8 hours) was measured using a score scale. Knoop microhardness was determined 100, 200, 500, 1000, 1500, 2500, 3500, 4500 and 5500µm from the occlusal surface at a distance of 150 and 1000µm from the metal matrix. The total degree of polymerization of a composite specimen was determined by calculating the area under the hardness curve. Results: Statistical analyses showed no difference in marginal adaptation (p>0.05). Hardness values at 150µm from the matrix were lower than those at 1000µm. There was an increase of the microhardness at the top of each increment and decrease towards the bottom of each increment. Longer curing times resulted in harder composite samples. Multiple linear regression showed that only the curing time (p<0.001) and composite material (p<0.001) had a significant association with the degree of polymerization. The degree of polymerization was not influenced by pre-warming the composite at a temperature of 54.5ºC (p=4.86). Conclusion: Polymerization time can not be reduced by pre-warming the composite on a temperature of 54.5ºC. The marginal adaptation is not compromised by pre-warming the composite.

Influence of beveling and ultrasound application on marginal adaptation of box-only Class II (slot) resin composite restorations

A laboratory study was performed to assess the influence of beveling the margins of cavities and the effects on marginal adaptation of the application of ultrasound during setting and initial light curing. After minimal access cavities had been prepared with an 80 microm diamond bur, 80 box-only Class II cavities were prepared mesially and distally in 40 extracted human molars using four different oscillating diamond coated instruments: (A) a U-shaped PCS insert as the non-beveled control (EMS), (B) Bevelshape (Intensiv), (C) SonicSys (KaVo) and (D) SuperPrep (KaVo). In groups B-D, the time taken for additional bevel finishing was measured. The cavities were filled with a hybrid composite material in three increments. Ultrasound was also applied to one cavity per tooth before and during initial light curing (10 seconds). The specimens were subjected to thermomechanical stress in a computer-controlled masticator device. Marginal quality was assessed by scanning electron microscopy and the results were compared statistically. The additional time required for finishing was B > D > C (p < or = 0.05). In all groups, thermomechanical loading resulted in a decrease in marginal quality. Beveling resulted in higher values for "continuous" margins compared with that of the unbeveled controls. The latter showed better marginal quality at the axial walls when ultrasound was used. Beveling seems essential for good marginal adaptation but requires more preparation time. The use of ultrasonic vibrations may improve the marginal quality of unbeveled fillings and warrants further investigation.

Marginal fit of cemented and screw-retained crowns incorporated on the Straumann (ITI) Dental Implant System: an in vitro study

AIM: The aim of this study was to assess the marginal fit of crowns on the Straumann (ITI) Dental Implant System with special consideration of different casting dental materials. MATERIAL AND METHODS: Sixty porcelain-fused-to-metal crowns were fabricated: 18 crowns on standard cone abutments with an impression cylinder, partially prefabricated analogs, no coping and screw-retained (A); 18 crowns on solid abutments without an impression device, no analogs, no coping and cemented (B); and 18 crowns on solid abutments using an impression transfer cap, an analog with a shoulder, no coping and cemented (C). In each group, six crowns were made on epoxy mastercasts (Bluestar), six on synthetic plaster (Moldasynt) and six on super hard stone (Fujirock). Six additional crowns were fabricated with the transversal screw retention system onto the Octa system with impression transfer caps, metal analogs, gold copings and screw-retained (D). Impregum was used as impression material. Crowns of B and C were cemented with KetacCem. Crowns of A and D were fixed with an occlusal screw torqued at 15 N cm. Crowns were embedded, cut and polished. Under a light microscope using a magnification of x 100, the distance between the crown margin (CM) and the shoulder (marginal gap, MG) and the distance between the CM and the end of the shoulder (crown length, CL) was measured. RESULTS: MGs were 15.4+/-13.2 microm (A), 21.2+/-23.1 microm (B), 11+/-12.1 microm (C) and 10.4+/-9.3 microm (D). No statistically significantly differences using either of the casting materials were observed. CLs were -21.3+/-24.8 microm (A), 3+/-28.9 microm (B), 0.5+/-22 microm (C) and 0.1+/-15.8 microm (D). Crowns were shorter on synthetic casting materials compared with stone casts (P<0.005). CONCLUSIONS: CMs fit precisely with both cemented and screw-retained versions as well as when using no, partial or full analogs.

A Foraging Cost of Migration for a Partially Migratory Cyprinid Fish

Migration has evolved as a strategy to maximise individual fitness in response to seasonally changing ecological and environmental conditions. However, migration can also incur costs, and quantifying these costs can provide important clues to the ultimate ecological forces that underpin migratory behaviour. A key emerging model to explain migration in many systems posits that migration is driven by seasonal changes to a predation/growth potential (p/g) trade-off that a wide range of animals face. In this study we assess a key assumption of this model for a common cyprinid partial migrant, the roach Rutilus rutilus, which migrates from shallow lakes to streams during winter. By sampling fish from stream and lake habitats in the autumn and spring and measuring their stomach fullness and diet composition, we tested if migrating roach pay a cost of reduced foraging when migrating. Resident fish had fuller stomachs containing more high quality prey items than migrant fish. Hence, we document a feeding cost to migration in roach, which adds additional support for the validity of the p/g model of migration in freshwater systems.

Prehistoric genomes reveal the genetic foundation and cost of horse domestication

The domestication of the horse revolutionized warfare, trade, and the exchange of people and ideas. This at least 5,500-y-long process, which ultimately transformed wild horses into the hundreds of breeds living today, is difficult to reconstruct from archeological data and modern genetics alone. We therefore sequenced two complete horse genomes, predating domestication by thousands of years, to characterize the genetic footprint of domestication. These ancient genomes reveal predomestic population structure and a significant fraction of genetic variation shared with the domestic breeds but absent from Przewalski’s horses. We find positive selection on genes involved in various aspects of locomotion, physiology, and cognition. Finally, we show that modern horse genomes contain an excess of deleterious mutations, likely representing the genetic cost of domestication.

The Marginal Impact of ENGOs in Different Types of Democratic Systems

Conventional wisdom suggests that environmental non-governmental organizations (ENGOs) play a major role in pushing states towards more ambitious environmental policies. However, demonstrating that this presumption is in fact true is rather difficult, because the same system structures of democracies that may create more opportunities for ENGO activities are also, on their own, conducive to better environmental policies. This leaves open the possibility that the additional (marginal) impact of ENGOs on policy making is smaller than presumed. In trying to disentangle these effects, this paper examines the influence of ENGOs contingent on key structural characteristics of democratic systems. We develop the argument that presidential systems with a plurality electoral rule per se tend to provide more environmental public goods, which induces a smaller marginal impact of ENGOs. Conversely, parliamentary systems with a proportional representation electoral rule are likely to provide fewer environmental public goods, which allows for a larger marginal impact of ENGOs. We find robust empirical support for these hypotheses in analyses that focus on the ratification behavior of 75 democracies vis-à-vis 250 international environmental agreements in 1973–2002.

Tackling of unhealthy diets, physical inactivity, and obesity: health effects and cost-effectiveness

The obesity epidemic is spreading to low-income and middle-income countries as a result of new dietary habits and sedentary ways of life, fuelling chronic diseases and premature mortality. In this report we present an assessment of public health strategies designed to tackle behavioural risk factors for chronic diseases that are closely linked with obesity, including aspects of diet and physical inactivity, in Brazil, China, India, Mexico, Russia, and South Africa. England was included for comparative purposes. Several population-based prevention policies can be expected to generate substantial health gains while entirely or largely paying for themselves through future reductions of health-care expenditures. These strategies include health information and communication strategies that improve population awareness about the benefits of healthy eating and physical activity; fiscal measures that increase the price of unhealthy food content or reduce the cost of healthy foods rich in fibre; and regulatory measures that improve nutritional information or restrict the marketing of unhealthy foods to children. A package of measures for the prevention of chronic diseases would deliver substantial health gains, with a very favourable cost-effectiveness profile.

A review of the cost effectiveness of bisphosphonates in the treatment of post-menopausal osteoporosis in Switzerland

The economic burden associated with osteoporosis is considerable. As such, cost-effectiveness analyses are important contributors to the diagnostic and therapeutic decision-making process. The aim of this study was to review the cost effectiveness of treating post-menopausal osteoporosis with bisphosphonates and identify the key factors that influence the cost effectiveness of such treatment in the Swiss setting. A systematic search of databases (MEDLINE, EMBASE and the Cochrane Library) was conducted to identify published literature on the cost effectiveness of bisphosphonates in post-menopausal osteoporosis in the Swiss setting. Outcomes were compared with similar studies in Western European countries. Three cost-effectiveness studies of bisphosphonates in this patient population were identified; all were from a healthcare payer perspective. Outcomes showed that, relative to no treatment, treatment with oral bisphosphonates was predicted to be cost saving for most women aged ≥70 years with osteoporosis or at least one risk factor for fracture, and cost effective for women aged ≥75 years without prior fracture when used as a component of a population-based screen-and-treat programme. Results were most sensitive to changes in fracture risk, cost of fractures, cost of treatment, nursing home admissions and adherence with treatment. Swiss results were generally comparable to those in other European settings. Assuming similar clinical efficacy, lowering treatment cost (through the use of price-reduced brand-name or generic drugs) and/or improving adherence should both contribute to further improving the cost effectiveness of bisphosphonates in women with post-menopausal osteoporosis. Published evidence indicates that bisphosphonates are estimated to be similarly cost effective or cost saving in most treatment scenarios of post-menopausal osteoporosis in Switzerland and in neighbouring European countries.

Cost-effectiveness of percutaneous coronary intervention in patients with stable coronary artery disease and abnormal fractional flow reserve

BACKGROUND The Fractional Flow Reserve Versus Angiography for Multivessel Evaluation (FAME) 2 trial demonstrated a significant reduction in subsequent coronary revascularization among patients with stable angina and at least 1 coronary lesion with a fractional flow reserve ≤0.80 who were randomized to percutaneous coronary intervention (PCI) compared with best medical therapy. The economic and quality-of-life implications of PCI in the setting of an abnormal fractional flow reserve are unknown. METHODS AND RESULTS We calculated the cost of the index hospitalization based on initial resource use and follow-up costs based on Medicare reimbursements. We assessed patient utility using the EQ-5D health survey with US weights at baseline and 1 month and projected quality-adjusted life-years assuming a linear decline over 3 years in the 1-month utility improvements. We calculated the incremental cost-effectiveness ratio based on cumulative costs over 12 months. Initial costs were significantly higher for PCI in the setting of an abnormal fractional flow reserve than with medical therapy ($9927 versus $3900, P<0.001), but the $6027 difference narrowed over 1-year follow-up to $2883 (P<0.001), mostly because of the cost of subsequent revascularization procedures. Patient utility was improved more at 1 month with PCI than with medical therapy (0.054 versus 0.001 units, P<0.001). The incremental cost-effectiveness ratio of PCI was $36 000 per quality-adjusted life-year, which was robust in bootstrap replications and in sensitivity analyses. CONCLUSIONS PCI of coronary lesions with reduced fractional flow reserve improves outcomes and appears economically attractive compared with best medical therapy among patients with stable angina.

Cost-effectiveness of ticagrelor and generic clopidogrel in patients with acute coronary syndrome in Switzerland

QUESTION UNDER STUDY The aim of this study was to evaluate the cost-effectiveness of ticagrelor and generic clopidogrel as add-on therapy to acetylsalicylic acid (ASA) in patients with acute coronary syndrome (ACS), from a Swiss perspective. METHODS Based on the PLATelet inhibition and patient Outcomes (PLATO) trial, one-year mean healthcare costs per patient treated with ticagrelor or generic clopidogrel were analysed from a payer perspective in 2011. A two-part decision-analytic model estimated treatment costs, quality-adjusted life years (QALYs), life years and the cost-effectiveness of ticagrelor and generic clopidogrel in patients with ACS up to a lifetime at a discount of 2.5% per annum. Sensitivity analyses were performed. RESULTS Over a patient's lifetime, treatment with ticagrelor generates an additional 0.1694 QALYs and 0.1999 life years at a cost of CHF 260 compared with generic clopidogrel. This results in an Incremental Cost Effectiveness Ratio (ICER) of CHF 1,536 per QALY and CHF 1,301 per life year gained. Ticagrelor dominated generic clopidogrel over the five-year and one-year periods with treatment generating cost savings of CHF 224 and 372 while gaining 0.0461 and 0.0051 QALYs and moreover 0.0517 and 0.0062 life years, respectively. Univariate sensitivity analyses confirmed the dominant position of ticagrelor in the first five years and probabilistic sensitivity analyses showed a high probability of cost-effectiveness over a lifetime. CONCLUSION During the first five years after ACS, treatment with ticagrelor dominates generic clopidogrel in Switzerland. Over a patient's lifetime, ticagrelor is highly cost-effective compared with generic clopidogrel, proven by ICERs significantly below commonly accepted willingness-to-pay thresholds.

Resin composites: Modulus of elasticity and marginal quality

OBJECTIVE To investigate how the modulus of elasticity of resin composites influences marginal quality in restorations submitted to thermocyclic and mechanical loading. METHODS Charisma, Filtek Supreme XTE and Grandio were selected as they were found to possess different moduli of elasticity but quite similar polymerization contraction. MOD cavities (n=30) were prepared in extracted premolars, restored and then subjected to thermocyclic and mechanical loading. Marginal quality of the restorations before and after loading was analyzed on epoxy replicas under a scanning electron microscope. The percentage of gap-free margins and occurrence of paramarginal fractures were registered. Modulus of elasticity and polymerization contraction were analyzed with parametric and margins with nonparametric ANOVA and post hoc Tukey HSD or Wilcoxon rank-sum tests, respectively. The number of paramarginal fractures was analyzed with exact Fisher tests (α=0.05). RESULTS Grandio demonstrated significantly more gap-free enamel margins than Charisma and Filtek Supreme XTE, before and after loading (p<0.01), whereas there was no difference between Charisma and Filtek Supreme XTE (p>0.05). No significant effect of resin composite (p=0.81) on the quality of dentine margins was observed, before or after loading. Deterioration of all margins was evident after loading (p<0.0001). More paramarginal enamel fractures were observed after loading in teeth restored with Grandio when compared to Charisma (p=0.008). CONCLUSIONS The resin composite with the highest modulus of elasticity resulted in the highest number of gap-free enamel margins but with an increased incidence of paramarginal enamel fractures. CLINICAL SIGNIFICANCE The results from this study suggest that the marginal quality of restorations can be improved by the selection of a resin composite with modulus of elasticity close to that of dentine, although an increase in paramarginal enamel fractures can result as a consequence.

Precision of fit and retention force of cast non-precious-crowns on standard titanium implant-abutment with different design and height

OBJECTIVE The cost-effectiveness of cast nonprecious frameworks has increased their prevalence in cemented implant crowns. The purpose of this study was to assess the effect of the design and height of the retentive component of a standard titanium implant abutment on the fit, possible horizontal rotation and retention forces of cast nonprecious alloy crowns prior to cementation. MATERIALS AND METHODS Two abutment designs were examined: Type A with a 6° taper and 8 antirotation planes (Straumann Tissue-Level RN) and Type B with a 7.5° taper and 1 antirotation plane (SICace implant). Both types were analyzed using 60 crowns: 20 with a full abutment height (6 mm), 20 with a medium abutment height (4 mm), and 20 with a minimal (2.5 mm) abutment height. The marginal and internal fit and the degree of possible rotation were evaluated by using polyvinylsiloxane impressions under a light microscope (magnification of ×50). To measure the retention force, a custom force-measuring device was employed. STATISTICAL ANALYSIS one-sided Wilcoxon rank-sum tests with Bonferroni-Holm corrections, Fisher's exact tests, and Spearman's rank correlation coefficient. RESULTS Type A exhibited increased marginal gaps (primary end-point: 55 ± 20 μm vs. 138 ± 59 μm, P < 0.001) but less rotation (P < 0.001) than Type B. The internal fit was also better for Type A than for Type B (P < 0.001). The retention force of Type A (2.49 ± 3.2 N) was higher (P = 0.019) than that of Type B (1.27 ± 0.84 N). Reduction in abutment height did not affect the variables observed. CONCLUSION Less-tapered abutments with more antirotation planes provide an increase in the retention force, which confines the horizontal rotation but widens the marginal gaps of the crowns. Thus, casting of nonprecious crowns with Type A abutments may result in clinically unfavorable marginal gaps.