Planning of a make-to-order production process in the printing industry

Offset printing is a common method to produce large amounts of printed matter. We consider a real-world offset printing process that is used to imprint customer-specific designs on napkin pouches. The production equipment used gives rise to various technological constraints. The planning problem consists of allocating designs to printing-plate slots such that the given customer demand for each design is fulfilled, all technological and organizational constraints are met and the total overproduction and setup costs are minimized. We formulate this planning problem as a mixed-binary linear program, and we develop a multi-pass matching-based savings heuristic. We report computational results for a set of problem instances devised from real-world data.

Vulnerability to risk among small farmers in Tajikistan: results of a 2011 survey

Tajikistan is judged to be highly vulnerable to risk, including food insecurity risks and climate change risks. By some vulnerability measures it is the most vulnerable among all 28 countries in the World Bank’s Europe and Central Asia Region – ECA (World Bank 2009). The rural population, with its relatively high incidence of poverty, is particularly vulnerable. The Pilot Program for Climate Resilience (PPCR) in Tajikistan (2011) provided an opportunity to conduct a farm-level survey with the objective of assessing various dimensions of rural population’s vulnerability to risk and their perception of constraints to farming operations and livelihoods. The survey should be accordingly referred to as the 2011 PPCR survey. The rural population in Tajikistan is highly agrarian, with about 50% of family income deriving from agriculture (see Figure 4.1; also LSMS 2007 – own calculations). Tajikistan’s agriculture basically consists of two groups of producers: small household plots – the successors of Soviet “private agriculture” – and dehkan (or “peasant”) farms – new family farming structures that began to be created under relevant legislation passed after 1992 (Lerman and Sedik, 2008). The household plots manage 20% of arable land and produce 65% of gross agricultural output (GAO). Dehkan farms manage 65% of arable land and produce close to 30% of GAO. The remaining 15% of arable land is held in agricultural enterprises – the rapidly shrinking sector of corporate farms that succeeded the Soviet kolkhozes and sovkhozes and today produces less than 10% of GAO (TajStat 2011) The survey conducted in May 2011 focused on dehkan farms, as budgetary constraints precluded the inclusion of household plots. A total of 142 dehkan farms were surveyed in face-to-face interviews. They were sampled from 17 districts across all four regions – Sughd, Khatlon, RRP, and GBAO. The districts were selected so as to represent different agro-climatic zones, different vulnerability zones (based on the World Bank (2011) vulnerability assessment), and different food-insecurity zones (based on WFP/IPC assessments). Within each district, 3-4 jamoats were chosen at random and 2-3 farms were selected in each jamoat from lists provided by jamoat administration so as to maximize the variability by farm characteristics. The sample design by region/district is presented in Table A, which also shows the agro-climatic zone and the food security phase for each district. The sample districts are superimposed on a map of food security phases based on IPC April 2011.

Methodological approach to the first and second lactate threshold in incremental cardiopulmonary exercise testing

Determination of an 'anaerobic threshold' plays an important role in the appreciation of an incremental cardiopulmonary exercise test and describes prominent changes of blood lactate accumulation with increasing workload. Two lactate thresholds are discerned during cardiopulmonary exercise testing and used for physical fitness estimation or training prescription. A multitude of different terms are, however, found in the literature describing the two thresholds. Furthermore, the term 'anaerobic threshold' is synonymously used for both, the 'first' and the 'second' lactate threshold, bearing a great potential of confusion. The aim of this review is therefore to order terms, present threshold concepts, and describe methods for lactate threshold determination using a three-phase model with reference to the historical and physiological background to facilitate the practical application of the term 'anaerobic threshold'.

A review identifies and classifies reasons for ordering diagnostic tests

OBJECTIVE: To consider the reasons and context for test ordering by doctors when faced with an undiagnosed complaint in primary or secondary care. STUDY DESIGN AND SETTING: We reviewed any study of any design that discussed factors that may affect a doctor's decision to order a test. Articles were located through searches of electronic databases, authors' files on diagnostic methodology, and reference lists of relevant studies. We extracted data on: study design, type of analysis, setting, topic area, and any factors reported to influence test ordering. RESULTS: We included 37 studies. We carried out a thematic analysis to synthesize data. Five key groupings arose from this process: diagnostic factors, therapeutic and prognostic factors, patient-related factors, doctor-related factors, and policy and organization-related factors. To illustrate how the various factors identified may influence test ordering we considered the symptom low back pain and the diagnosis multiple sclerosis as examples. CONCLUSIONS: A wide variety of factors influence a doctor's decision to order a test. These are integral to understanding diagnosis in clinical practice. Traditional diagnostic accuracy studies should be supplemented with research into the broader context in which doctors perform their work.

Thoracic endovascular aortic repair: impact of urgency on outcome and quality of life

OBJECTIVES: Endovascular repair of the descending thoracic aorta is a very promising technique in elective and, particularly, emergency situations. This study assessed the impact of urgency of the procedure on outcome and mid-term quality of life in surviving patients. METHODS: Post hoc analysis of prospectively collected data of 58 consecutive patients (January 2001-December 2005) with surgical pathologies of the descending thoracic aorta treated by endovascular means. Six patients were excluded due to recent operations on the ascending aorta before thoracic endovascular repair. The remaining patients (n=52) were 69+/-10 years old, and 43 were men (83%). Twenty-seven had been treated electively, and 25 for emergency indications. Reasons for emergency were acute type B aortic dissections with or without malperfusion syndrome in 14, and aortic ruptures in 11 cases. Follow-up was 29+/-16 months. Endpoints were perioperative and late morbidity and mortality rates and long-term quality of life as assessed by the short form health survey (SF-36) and Hospital Anxiety and Depression Scale questionnaires. RESULTS: Cohorts were comparable regarding age, sex, cardiovascular risk factors, and comorbidities. Perioperative mortality was somewhat higher in emergency cases (12% vs 4%, p=0.34). Paraplegia occurred in one patient in each cohort (4%). Overall quality of life after two and a half years was similar in both treatment cohorts: 72 (58-124) after emergency, and 85 (61-105) after elective endovascular aortic repair (p=0.98). Normal scores range from 85 to 115. Anxiety and depression scores were in the normal range and comparable. CONCLUSIONS: Thoracic endovascular aortic repair is an excellent and safe treatment option for the diseased descending aorta, particularly in emergency situations. Early morbidity and mortality rates can be kept very low. Mid-term quality of life was not affected by the urgency of the procedure. Similarly, mid-term anxiety and depression scores were not increased after emergency situations.

Operationalizing ecosystem services for the mitigation of soil threats: A proposed framework

Despite numerous research efforts over the last decades, integrating the concept of ecosystem servicesinto land management decision-making continues to pose considerable challenges. Researchers havedeveloped many different frameworks to operationalize the concept, but these are often specific to acertain issue and each has their own definitions and understandings of particular terms. Based on acomprehensive review of the current scientific debate, the EU FP7 project RECARE proposes an adaptedframework for soil-related ecosystem services that is suited for practical application in the preventionand remediation of soil degradation across Europe. We have adapted existing frameworks by integratingcomponents from soil science while attempting to introduce a consistent terminology that is understand-able to a variety of stakeholders. RECARE aims to assess how soil threats and prevention and remediationmeasures affect ecosystem services. Changes in the natural capital’s properties influence soil processes,which support the provision of ecosystem services. The benefits produced by these ecosystem servicesare explicitly or implicitly valued by individuals and society. This can influence decision- and policymak-ing at different scales, potentially leading to a societal response, such as improved land management.The proposed ecosystem services framework will be applied by the RECARE project in a transdisciplinaryprocess. It will assist in singling out the most beneficial land management measures and in identifyingtrade-offs and win–win situations resulting from and impacted by European policies. The framework thusreflects the specific contributions soils make to ecosystem services and helps reveal changes in ecosystemservices caused by soil management and policies impacting on soil. At the same time, the framework issimple and robust enough for practical application in assessing soil threats and their management withstakeholders at various levels.

Heuristic decomposition and LP-based scheduling in make-and-pack production

In this paper, we are concerned about the short-term scheduling of industrial make-and-pack production processes. The planning problem consists in minimizing the production makespan while meeting given end-product demands. Sequence-dependent changeover times, multi-purpose storage units with finite capacities, quarantine times, batch splitting, partial equipment connectivity, material transfer times, and a large number of operations contribute to the complexity of the problem. Known MILP formulations cover all technological constraints of such production processes, but only small problem instances can be solved in reasonable CPU times. In this paper, we develop a heuristic in order to tackle large instances. Under this heuristic, groups of batches are scheduled iteratively using a novel MILP formulation; the assignment of the batches to the groups and the scheduling sequence of the groups are determined using a priority rule. We demonstrate the applicability by means of a real-world production process.