Chronology of Lake El'gygytgyn sediments – a combined magnetostratigraphic, palaeoclimatic and orbital tuning study based on multi-parameter analyses

A 318-metre-long sedimentary profile drilled by the International Continental Scientific Drilling Program (ICDP) at Site 5011-1 in Lake El’gygytgyn, Far East Russian Arctic, has been analysed for its sedimentologic response to global climate modes by chronostratigraphic methods. The 12 km wide lake is sited off-centre in an 18 km large crater that was created by the impact of a meteorite 3.58 Ma ago. Since then sediments have been continuously deposited. For establishing their chronology, major reversals of the earth’s magnetic field provided initial tie points for the age model, confirming that the impact occurred in the earliest geomagnetic Gauss chron. Various stratigraphic parameters, reflecting redox conditions at the lake floor and climatic conditions in the catchment were tuned synchronously to Northern Hemisphere insolation variations and the marine oxygen isotope stack, respectively. Thus, a robust age model comprising more than 600 tie points could be defined. It could be shown that deposition of sediments in Lake El’gygytgyn occurred in concert with global climatic cycles. The upper �160m of sediments represent the past 3.3 Ma, equivalent to sedimentation rates of 4 to 5 cm ka−1, whereas the lower 160m represent just the first 0.3 Ma after the impact, equivalent to sedimentation rates in the order of 45 cm ka−1. This study also provides orbitally tuned ages for a total of 8 tephras deposited in Lake El’gygytgyn.

Finite element analyses of human vertebral bodies embedded in polymethylmethalcrylate or loaded via the hyperelastic intervertebral disc models provide equivalent predictions of experimental strength

Quantitative computer tomography (QCT)-based finite element (FE) models of vertebral body provide better prediction of vertebral strength than dual energy X-ray absorptiometry. However, most models were validated against compression of vertebral bodies with endplates embedded in polymethylmethalcrylate (PMMA). Yet, loading being as important as bone density, the absence of intervertebral disc (IVD) affects the strength. Accordingly, the aim was to assess the strength predictions of the classic FE models (vertebral body embedded) against the in vitro and in silico strengths of vertebral bodies loaded via IVDs. High resolution peripheral QCT (HR-pQCT) were performed on 13 segments (T11/T12/L1). T11 and L1 were augmented with PMMA and the samples were tested under a 4° wedge compression until failure of T12. Specimen-specific model was generated for each T12 from the HR-pQCT data. Two FE sets were created: FE-PMMA refers to the classical vertebral body embedded model under axial compression; FE-IVD to their loading via hyperelastic IVD model under the wedge compression as conducted experimentally. Results showed that FE-PMMA models overestimated the experimental strength and their strength prediction was satisfactory considering the different experimental set-up. On the other hand, the FE-IVD models did not prove significantly better (Exp/FE-PMMA: R²=0.68; Exp/FE-IVD: R²=0.71, p=0.84). In conclusion, FE-PMMA correlates well with in vitro strength of human vertebral bodies loaded via real IVDs and FE-IVD with hyperelastic IVDs do not significantly improve this correlation. Therefore, it seems not worth adding the IVDs to vertebral body models until fully validated patient-specific IVD models become available.

Comparison of Mixed and Kinematic Uniform Boundary Conditions in Homogenized Elasticity of Femoral Trabecular Bone Using Microfinite Element Analyses

Mechanical properties of human trabecular bone play an important role in age-related bone fragility and implant stability. Micro-finite element (microFE) analysis allows computing the apparent elastic properties of trabecular bone biopsies, but the results depend on the type of applied boundary conditions (BCs). In this study, 167 femoral trabecular cubic biopsies with a side length of 5.3 mm were analyzed using microFE analysis to compare their stiffness systematically with kinematic uniform boundary conditions (KUBCs) and periodicity-compatible mixed uniform boundary conditions (PMUBCs). The obtained elastic constants were then used in the volume fraction and fabric-based orthotropic Zysset-Curnier model to identify their respective model parameters. As expected, PMUBCs lead to more compliant apparent elastic properties than KUBCs, especially in shear. The differences in stiffness decreased with bone volume fraction and mean intercept length. Unlike KUBCs, PMUBCs were sensitive to heterogeneity of the biopsies. The Zysset-Curnier model predicted apparent elastic constants successfully in both cases with adjusted coefficients of determination of 0.986 for KUBCs and 0.975 for PMUBCs. The role of these boundary conditions in finite element analyses of whole bones and bone-implant systems will need to be investigated in future work.

Exploring Multi-Component Superconducting Compounds by a High-Pressure Method and Ceramic Combinatorial Chemistry

In this short review, we provide some new insights into the material synthesis and characterization of modern multi-component superconducting oxides. Two different approaches such as the high-pressure, high-temperature method and ceramic combinatorial chemistry will be reported with application to several typical examples. First, we highlight the key role of the extreme conditions in the growth of Fe-based superconductors, where a careful control of the composition-structure relation is vital for understanding the microscopic physics. The availability of high-quality LnFeAsO (Ln = lanthanide) single crystals with substitution of O by F, Sm by Th, Fe by Co, and As by P allowed us to measure intrinsic and anisotropic superconducting properties such as Hc2, Jc. Furthermore, we demonstrate that combinatorial ceramic chemistry is an efficient way to search for new superconducting compounds. A single-sample synthesis concept based on multi-element ceramic mixtures can produce a variety of local products. Such a system needs local probe analyses and separation techniques to identify compounds of interest. We present the results obtained from random mixtures of Ca, Sr, Ba, La, Zr, Pb, Tl, Y, Bi, and Cu oxides reacted at different conditions. By adding Zr but removing Tl, Y, and Bi, the bulk state superconductivity got enhanced up to about 122 K.

Is the relation between early post-session reports and treatment outcome an epiphenomenon of intake distress and early response? A multi-predictor analysis in outpatient psychotherapy

The early phase of psychotherapy has been regarded as a sensitive period in the unfolding of psychotherapy leading to positive outcomes. However, there is disagreement about the degree to which early (especially relationship-related) session experiences predict outcome over and above initial levels of distress and early response to treatment. The goal of the present study was to simultaneously examine outcome at post treatment as a function of (a) intake symptom and interpersonal distress as well as early change in well-being and symptoms, (b) the patient's early session-experiences, (c) the therapist's early session-experiences/interventions, and (d) their interactions. The data of 430 psychotherapy completers treated by 151 therapists were analyzed using hierarchical linear models. Results indicate that early positive intra- and interpersonal session experiences as reported by patients and therapists after the sessions explained 58% of variance of a composite outcome measure, taking intake distress and early response into account. All predictors (other than problem-activating therapists' interventions) contributed to later treatment outcomes if entered as single predictors. However, the multi-predictor analyses indicated that interpersonal distress at intake as well as the early interpersonal session experiences by patients and therapists remained robust predictors of outcome. The findings underscore that early in therapy therapists (and their supervisors) need to understand and monitor multiple interconnected components simultaneously

Experimental Validation of Finite Element Analysis of Human Vertebral Collapse Under Large Compressive Strains

Osteoporosis-related vertebral fractures represent a major health problem in elderly populations. Such fractures can often only be diagnosed after a substantial deformation history of the vertebral body. Therefore, it remains a challenge for clinicians to distinguish between stable and progressive potentially harmful fractures. Accordingly, novel criteria for selection of the appropriate conservative or surgical treatment are urgently needed. Computer tomography-based finite element analysis is an increasingly accepted method to predict the quasi-static vertebral strength and to follow up this small strain property longitudinally in time. A recent development in constitutive modeling allows us to simulate strain localization and densification in trabecular bone under large compressive strains without mesh dependence. The aim of this work was to validate this recently developed constitutive model of trabecular bone for the prediction of strain localization and densification in the human vertebral body subjected to large compressive deformation. A custom-made stepwise loading device mounted in a high resolution peripheral computer tomography system was used to describe the progressive collapse of 13 human vertebrae under axial compression. Continuum finite element analyses of the 13 compression tests were realized and the zones of high volumetric strain were compared with the experiments. A fair qualitative correspondence of the strain localization zone between the experiment and finite element analysis was achieved in 9 out of 13 tests and significant correlations of the volumetric strains were obtained throughout the range of applied axial compression. Interestingly, the stepwise propagating localization zones in trabecular bone converged to the buckling locations in the cortical shell. While the adopted continuum finite element approach still suffers from several limitations, these encouraging preliminary results towardsthe prediction of extended vertebral collapse may help in assessing fracture stability in future work.

Bone Volume Fraction and Fabric Anisotropy Are Better Determinants of Trabecular Bone Stiffness than Other Morphological Variables

As our population ages, more individuals suffer from osteoporosis. This disease leads to impaired trabecular architecture and increased fracture risk. It is essential to understand how morphological and mechanical properties of the cancellous bone are related. Morphologyelasticity relationships based on bone volume fraction (BV/TV) and fabric anisotropy explain up to 98% of the variation in elastic properties. Yet, other morphological variables such as individual trabeculae segmentation (ITS) and trabecular bone score (TBS) could improve the stiffness predictions. A total of 743 micro-computed tomography reconstructions of cubic trabecular bone samples extracted from femur, radius, vertebrae and iliac crest were analysed. Their morphology was assessed via 25 variables and their stiffness tensor (inline image) was computed from six independent load cases using micro finite element analyses. Variance inflation factors were calculated to evaluate collinearity between morphological variables and decide upon their inclusion in morphology-elasticity relationships. The statistically admissible morphological variables were included in a multi-linear regression modelling the dependent variable inline image. The contribution of each independent variable was evaluated (ANOVA). Our results show that BV/TV is the best determinant of inline image (inline image=0.889), especially in combination with fabric (inline image=0.968). Including the other independent predictors hardly affected the amount of variance explained by the model (inline image=0.975). Across all anatomical sites, BV/TV explained 87% of the variance of the bone elastic properties. Fabric further described 10% of the bone stiffness, but the improvement in variance explanation by adding other independent factors was marginal (<1%). These findings confirm that BV/TV and fabric are the best determinants of trabecular bone stiffness and show, against common belief, that other morphological variables do not bring any further contribution. These overall conclusions remain to be confirmed for specific bone diseases and post-elastic properties.

Nonlinear quasi-static finite element simulations predict in vitro strength of human proximal femora assessed in a dynamic sideways fall setup

Osteoporotic proximal femur fractures are caused by low energy trauma, typically when falling on the hip from standing height. Finite element simulations, widely used to predict the fracture load of femora in fall, usually include neither mass-related inertial effects, nor the viscous part of bone's material behavior. The aim of this study was to elucidate if quasi-static non-linear homogenized finite element analyses can predict in vitro mechanical properties of proximal femora assessed in dynamic drop tower experiments. The case-specific numerical models of thirteen femora predicted the strength (R2=0.84, SEE=540 N, 16.2%), stiffness (R2=0.82, SEE=233 N/mm, 18.0%) and fracture energy (R2=0.72, SEE=3.85 J, 39.6%); and provided fair qualitative matches with the fracture patterns. The influence of material anisotropy was negligible for all predictions. These results suggest that quasi-static homogenized finite element analysis may be used to predict mechanical properties of proximal femora in the dynamic sideways fall situation.

Individual and structural factors of member commitment in sports clubs

This article analyses the conditions influencing the commitment of members of sports clubs. It focuses not only on individual characteristics of members, but also on the corresponding structural conditions of sports clubs related to the individual decision to quit or continue their membership. The influences of both the individual and context levels on the commitment of members are estimated in different multi-level models. Results of these multi-level analyses indicate that commitment of members is not just an outcome of individual characteristics such as strong commitment to the club, positively perceived communication and cooperation, satisfaction with sports clubsʼ offers, or voluntary engagement. It is also influenced by club-specific structural conditions: commitment is more probable in rural sports clubs, and clubs who explicitly support sociability, whereas success-oriented sporting goals in clubs have a destabilizing effect.

K-feldspar hygrochronology

The significance of the multi-isotopic record preserved in K-feldspars is assessed on samples from the Aar metagranite, Central Alps, Switzerland having very tight independent geological constraints. Stepwise leaching reveals that two diachronically grown K-feldspar generations coexist: Kfs-1 (≥ 35 Ma old, Ca-poor, Rb-Cl-rich, with low 87Sr/86Sr and high 206Pb/204Pb) and Kfs-2 (≤ 10 Ma old, antithetic isotopic signatures deriving from external fluids). Microtextures imaged by cathodoluminescence, backscattered electrons, and electron probe microanalysis are patchy and chemically heterogeneous, with pronounced enrichments in Ba in the retrogressed regions. This confirms the simultaneous presence of fluid-dominated retrogression and recrystallization and isotopic inheritance. The staircase-shaped 40Ar/39Ar age spectrum correlates with the Ca/K and Cl/K signatures. This reflects a mixture of heterochemical K-feldspar generations, and not an intracrystalline Ar gradient caused by diffusion. The shape of the age spectrum and the in vacuo release kinetics proceed from entirely different physical and geological phenomena. What K-feldspars can be effectively used for is to constrain the timing of the fluids that interacted with them by multi-isotopic analyses, rather than to model a “cooling history” from 39Ar release alone. The identification of multiple mineral generations by imaging combined with multi-isotopic analysis enables the accurate dating of the events of a multistage evolution after the initial crystallization of the rock in which the minerals occur.

Migrant Background and Higher Education Participation in Europe. The Effect of the Educational Systems

The main aim of this article is to shed light on the extent to which differences in higher education participation between people with and without a migrant background of low/higher social origin can be explained by two macro-level characteristics of national educational institutions: stratification of the secondary school system and provision of alternative access to higher education. General assumptions are that people with a migrant background of low social origin benefit in low-stratified secondary school systems and in systems that provide alternative access to institutions of higher education more than their native peers in the same social stratum, owing to primary and secondary effects of migrant background. Database is a pooled dataset of the five waves of the European Social Survey. Results of logistic multi-level analyses indicate that a low-stratified secondary school system improves the probability of people with a migrant background/low social origin attaining a higher education degree. On the other hand, a stratified secondary school system reduces their chances regarding this educational stage. The provision of alternative access to an institution of higher education improves their likelihood of becoming higher education graduates.

Elemental and Lead Isotopic Data of Copper Finds from the Singen Cemetery, Germany – a Methodological Approach to Investigate Early Bronze Age Trade Networks

We report a trace element - Pb isotope analytical (LIA) database on the "Singen Copper", a peculiar type of copper found in the North Alpine realm, from its type locality, the Early Bronze Age Singen Cemetery (Germany). What distinguishes “Singen Copper” from other coeval copper types? (i) is it a discrete metal lot with a uniform provenance (if so, can its provenance be constrained)? (ii) was it manufactured by a special, unique metallurgical process that can be discriminated from others? Trace element concentrations can give clues on the ore types that were mined, but they can be modified (more or less intentionally) by metallurgical operations. A more robust indicator are the ratios of chemically similar elements (e.g. Co/Ni, Bi/Sb, etc.), since they should remain nearly constant during metallurgical operations, and are expected to behave homogeneously in each mineral of a given mining area, but their partition amongst the different mineral species is known to cause strong inter-element fractionations. We tested the trace element ratio pattern predicted by geochemical arguments on the Brixlegg mining area. Brixlegg itself is not compatible with the Singen Copper objects, and we only report it because it is a rare instance of a mining area for which sufficient trace element analyses are available in the literature. We observe that As/Sb in fahlerz varies by a factor 1.8 above/below median; As/Sb in enargite varies by a factor of 2.5 with a 10 times higher median. Most of the 102 analyzed metal objects from Singen are Sb-Ni-rich, corresponding to “antimony-nickel copper” of the literature. Other trace element concentrations vary by > 100 times, ratios by factors > 50. Pb isotopic compositions are all significantly different from each other. They do not form a single linear array and require > 3 ore batches that certainly do not derive from one single mining area. Our data suggest a heterogeneous provenance of “Singen copper”. Archaeological information limits the scope to Central European sources. LIA requires a diverse supply network from many mining localities, including possibly Brittany. Trace element ratios show more heterogeneity than LIA; this can be explained either by deliberate selection of one particular ore mineral (from very many sources) or by processing of assorted ore minerals from a smaller number of sources, with the unintentional effect that the quality of the copper would not be constant, as the metallurgical properties of alloys would vary with trace element concentrations.

Challenge stressors: longitudinal effects on self attitudes, work attitudes, and health.

Recent research suggests that some stressors (i.e. hindrance stressors) have mainly negative consequences, whereas others (i.e. challenge stressors) can simultaneously have positive and negative consequences (e.g., LePine et al., 2005). Although a number of studies have dealt with potential outcomes of challenge stressors, some criteria have received only limited attention (e.g., positive self-attitudes; cf. Widmer et al., 2012), and some have been neglected altogether (i.e., physical health outcomes). Furthermore, while sophisticated methods – such as meta-analyses (e.g., LePine et al., 2005), diary studies (Ohly & Fritz, 2010), and multi-source analyses (Wallace et al., 2009) – have been applied to the framework, there are no longitudinal studies. We report results from a longitudinal study containing three waves, with two time-lags of one month each (N = 393). We analyzed relationships between challenge stressors and work attitudes (e.g. job satisfaction), self attitudes (e.g. self-esteem), and health indicators (e.g. sleep quality) using cross-lagged SEM. We expected positive effects of challenge stressors to appear only when their negative variance is controlled (e.g. by including hindrance stressors as a suppressor variable; cf. Cavanaugh et al., 2000). As the positive aspects of challenge stressors relate to self-affirming experiences, we also expected positive effects to be especially strong for self attitudes. Regarding work attitudes, the only significant paths found were from work attitudes to challenge stressors over both time lags. Regarding health, there was a significant cross-sectional association at time 1, which was negative, as expected. Longitudinally, a positive path from challenge stressors to health for both time lags was found only when hindrances stressors were controlled, confirming the expected suppressor effect. Hindrance stressors had a negative effect on health. For self-attitudes, there was a positive cross-sectional association at time one. In addition, a positive effect on self attitudes was found longitudinally for both time lags, but only when hindrance stressors were controlled. Additional analyses showed that the positive longitudinal effect on health was mediated by self attitudes. Although the lack of associations with work attitudes was surprising, our results indicate that challenge stressors contain aspects that provide an opportunity to develop self-esteem through demanding work situations, thereby contributing to personal growth and thriving at the workplace. They also confirm the ambiguous nature of challenge stressors, as, with one exception, positive effects were found only when hindrance stressors were controlled (cf. Widmer et al., 2012). Finally, our results confirm the importance of self-related attitudes in the stress process.

Does the (structural) context matter? Analysing individual and structural factors of members’ commitment to sports clubs

Introduction: Over the last decades, Swiss sports clubs have lost their "monopoly" in the market for sports-related services and increasingly are in competition with other sports providers. For many sport clubs long-term membership cannot be seen as a matter of course. Current research on sports clubs in Switzerland – as well as for other European countries – confirms the increasing difficulties in achieving long-term member commitment. Looking at recent findings of the Swiss sport clubs report (Lamprecht, Fischer & Stamm, 2012), it can be noted, that a decrease in memberships does not equally affect all clubs. There are sports clubs – because of their specific situational and structural conditions – that have few problems with member fluctuation, while other clubs show considerable declines in membership. Therefore, a clear understanding of individual and structural factors that trigger and sustain member commitment would help sports clubs to tackle this problem more effectively. This situation poses the question: What are the individual and structural determinants that influence the tendency to continue or to quit the membership? Methods: Existing research has extensively investigated the drivers of members’ commitment at an individual level. As commitment of members usually occurs within an organizational context, the characteristics of the organisation should be also considered. However, this context has been largely neglected in current research. This presentation addresses both the individual characteristics of members and the corresponding structural conditions of sports clubs resulting in a multi-level framework for the investigation of the factors of members’ commitment in sports clubs. The multilevel analysis grant a adequate handling of hierarchically structured data (e.g., Hox, 2002). The influences of both the individual and context level on the stability of memberships are estimated in multi-level models based on a sample of n = 1,434 sport club members from 36 sports clubs. Results: Results of these multi-level analyses indicate that commitment of members is not just an outcome of individual characteristics, such as strong identification with the club, positively perceived communication and cooperation, satisfaction with sports clubs’ offers, or voluntary engagement. It is also influenced by club-specific structural conditions: stable memberships are more probable in rural sports clubs, and in clubs that explicitly support sociability, whereas sporting-success oriented goals in clubs have a destabilizing effect. Discussion/Conclusion: The proposed multi-level framework and the multi-level analysis can open new perspectives for research concerning commitment of members to sports clubs and other topics and problems of sport organisation research, especially in assisting to understand individual behavior within organizational contexts. References: Hox, J. J. (2002). Multilevel analysis: Techniques and applications. Mahwah: Lawrence Erlbaum. Lamprecht, M., Fischer, A., & Stamm, H.-P. (2012). Die Schweizer Sportvereine – Strukturen, Leistungen, Herausforderungen. Zurich: Seismo.