International standards for programmes of training in intensive care medicine in Europe.

PURPOSE To develop internationally harmonised standards for programmes of training in intensive care medicine (ICM). METHODS Standards were developed by using consensus techniques. A nine-member nominal group of European intensive care experts developed a preliminary set of standards. These were revised and refined through a modified Delphi process involving 28 European national coordinators representing national training organisations using a combination of moderated discussion meetings, email, and a Web-based tool for determining the level of agreement with each proposed standard, and whether the standard could be achieved in the respondent's country. RESULTS The nominal group developed an initial set of 52 possible standards which underwent four iterations to achieve maximal consensus. All national coordinators approved a final set of 29 standards in four domains: training centres, training programmes, selection of trainees, and trainers' profiles. Only three standards were considered immediately achievable by all countries, demonstrating a willingness to aspire to quality rather than merely setting a minimum level. Nine proposed standards which did not achieve full consensus were identified as potential candidates for future review. CONCLUSIONS This preliminary set of clearly defined and agreed standards provides a transparent framework for assuring the quality of training programmes, and a foundation for international harmonisation and quality improvement of training in ICM.

Estimation of the risks of thermal stress due to the microclimate for manual fruit and vegetable harvesters in central Italy

Agricultural workers are exposed to various risks, including chemical agents, noise, and many other factors. One of the most characteristic and least known risk factors is constituted by the microclimatic conditions in the different phases of work (in field, in greenhouse, etc). A typical condition is thermal stress due to high temperatures during harvesting operations in open fields or in greenhouses. In Italy, harvesting is carried out for many hours during the day, mainly in the summer, with temperatures often higher than 30 degrees C. According to ISO 7243, these conditions can be considered dangerous for workers' health. The aim of this study is to assess the risks of exposure to microclimatic conditions (heat) for fruit and vegetable harvesters in central Italy by applying methods established by international standards. In order to estimate the risk for workers, the air temperature, radiative temperature, and air speed were measured using instruments in conformity with ISO 7726. Thermodynamic parameters and two more subjective parameters, clothing and the metabolic heat production rate related to the worker's physical activity, were used to calculate the predicted heat strain (PHS) for the exposed workers in conformity with ISO 7933. Environmental and subjective parameters were also measured for greenhouse workers, according to ISO 7243, in order to calculate the wet-bulb globe temperature (WBGT). The results show a slight risk for workers during manual harvesting in the field. On the other hand, the data collected in the greenhouses show that the risk for workers must not be underestimated. The results of the study show that, for manual harvesting work in climates similar to central Italy, it is essential to provide plenty of drinking water and acclimatization for the workers in order to reduce health risks. Moreover, the study emphasizes that the possible health risks for greenhouse workers increase from the month of April through July.

[Autonomic neuropathy in somatization disorders]

AIM: We conducted a study to investigate whether patients with somatization disorder show abnormal values in autonomic testing, especially in the central baroreceptor sensitivity. PATIENTS AND METHODS: Seventy-one patients were included. All had a diagnosis of somatization disorder (ICD-10, F45.0). Psychometric testing was performed by means of validated questionnaires (STAI, STAXI, FPI, GBB, ADS, SOMS, SCL-90-R). Autonomic regulation was analyzed by international standards using frequency spectral calculation by fast Fourier transformation. Thereby 3 different groups were detected: 12 patients with a baroreceptor sensitivity (BRS) of less than 3.0 ms/mm Hg, 20 patients with normal BRS (> 9.0 ms/mm Hg), and an in-between group (n = 39) with intermediate BRS. Controlling for age, a covariance analysis was calculated. RESULTS: The two extreme groups showed no difference in psychometric testing. However, significant differences were discernible in spectral values of mid-frequency-band (p < 0.05) in a covariance analysis with age as covariate. Equally the 24 h blood pressure determination showed significantly higher values for the group with BRS < 3.0 ms/mm Hg (p < 0.05 to 0.001). CONCLUSIONS: In a high percentage (17 %) of patients diagnosed to have somatization disorder autonomic dysregulation becomes apparent and is accompanied by increased blood pressure. Therefore it doesn't seem accurate to overlook concomitant organic lesions in somatization disorders despite patients lacking overtly clinical signs but suffering from various unspecific symptoms.

The new licencing examination for human medicine: from concept to implementation

A new Swiss federal licencing examination for human medicine (FLE) was developed and released in 2011. This paper describes the process from concept design to the first results obtained on implementation of the new examination. The development process was based on the Federal Act on University Medical Professions and involved all national stakeholders in this venture. During this process questions relating to the assessment aims, the assessment formats, the assessment dimensions, the examination content and necessary trade-offs were clarified. The aims were to create a feasible, fair, valid and psychometrically sound examination in accordance with international standards, thereby indicating the expected knowledge and skills level at the end of undergraduate medical education. Finally, a centrally managed and locally administered examination comprising a written multiple-choice element and a practical “clinical skills” test in the objective structured clinical examination (OSCE) format was developed. The first two administrations of the new FLE show that the examination concept could be implemented as intended. The anticipated psychometric indices were achieved and the results support the validity of the examination. Possible changes to the format or content in the future are discussed.

Seals and the Need for more Deference to Vienna by WTO Adjudicators

This paper asks how World Trade Organization (WTO) panels and the Appellate Body (AB) take public international law (PIL) into account when interpreting WTO rules as a part of international economic law (IEL). Splendid isolation of the latter is not new; indeed it is intended by the negotiators of the Understanding on the Settlement of Disputes (DSU). At the same time, the Vienna Convention on the Law of Treaties (VCLT) is quite clear when it provides the general rules and the supplementary means of treaty interpretation. Despite such mandatory guidance, WTO adjudicators (when given a choice and assuming they see the conflict) prefer deference to WTO law over deference to Vienna and take a dogmatic way out of interpretation quandaries. The AB and panels make abundant reference to Vienna, though less so to substantive PIL. Often times, however, they do so simply in order to buttress their findings of violations of WTO rules. Perhaps tellingly, however, none of the reports in EC – Seals contains even a single mention of VCLT, despite numerous references to international standards addressing indigenous rights and animal welfare. In the longer term, and absent a breakthrough on the negotiation front, this pattern of carefully eschewing international treaty law and using PIL just for the sake of convenience could have serious consequences for the credibility and acceptance of the multilateral trading system. Following the adage ‘negotiate or litigate’ recourse to WTO dispute settlement increases when governments are less ready to make treaty commitments commensurate with the challenges of globalisation. This is true even for ‘societal choice’ cases on the margins of classic trade disputes. We will argue here that it is precisely for cases such as these that VCLT and PIL should be used more systematically by panels and the AB. Failing that, instead of building bridges for more coherent international regulation, WTO adjudicators could burn those same bridges which the DSU interpretation margin leaves open for accomplishing their job which is to find a ‘positive solution’. Worse, judicial incoherence could return to WTO dispute settlement like a boomerang and damage the credibility and thus the level of acceptance of the multilateral trading system per se.

Consensus standards for acquisition, measurement, and reporting of intravascular optical coherence tomography studies: a report from the International Working Group for Intravascular Optical Coherence Tomography Standardization and Validation

The purpose of this document is to make the output of the International Working Group for Intravascular Optical Coherence Tomography (IWG-IVOCT) Standardization and Validation available to medical and scientific communities, through a peer-reviewed publication, in the interest of improving the diagnosis and treatment of patients with atherosclerosis, including coronary artery disease.

Proposed minimal standards for the description of genera, species and subspecies of the Pasteurellaceae

Principles and guidelines are presented to ensure a solid scientific standard of papers dealing with the taxonomy of taxa of Pasteurellaceae Pohl 1981. The classification of the Pasteurellaceae is in principle based on a polyphasic approach. DNA sequencing of certain genes is very important for defining the borders of a taxon. However, the characteristics that are common to all members of the taxon and which might be helpful for separating it from related taxa must also be identified. Descriptions have to be based on as many strains as possible (inclusion of at least five strains is highly desirable), representing different sources with respect to geography and ecology, to allow proper characterization both phenotypically and genotypically, to establish the extent of diversity of the cluster to be named. A genus must be monophyletic based on 16S rRNA gene sequence-based phylogenetic analysis. Only in very rare cases is it acceptable that monophyly can not be achieved by 16S rRNA gene sequence comparison. Recently, the monophyly of genera has been confirmed by sequence comparison of housekeeping genes. In principle, a new genus should be recognized by a distinct phenotype, and characters that separate the new genus from its neighbours should be given clearly. Due to the overall importance of accurate classification of species, at least two genotypic methods are needed to show coherence and for separation at the species level. The main criterion for the classification of a novel species is that it forms a monophyletic group based on 16S rRNA gene sequence-based phylogenetic analysis. However, some groups might also include closely related species. In these cases, more sensitive tools for genetic recognition of species should be applied, such as DNA-DNA hybridizations. The comparison of housekeeping gene sequences has recently been used for genotypic definition of species. In order to separate species, phenotypic characters must also be identified to recognize them, and at least two phenotypic differences from existing species should be identified if possible. We recommend the use of the subspecies category only for subgroups associated with disease or similar biological characteristics. At the subspecies level, the genotypic groups must always be nested within the boundaries of an existing species. Phenotypic cohesion must be documented at the subspecies level and separation between subspecies and related species must be fully documented, as well as association with particular disease and host. An overview of methods previously used to characterize isolates of the Pasteurellaceae has been given. Genotypic and phenotypic methods are separated in relation to tests for investigating diversity and cohesion and to separate taxa at the level of genus as well as species and subspecies.

Developing ICF Core Sets for persons with sleep disorders based on the International Classification of Functioning, Disability and Health

BACKGROUND: With the International Classification of Functioning, Disability and Health (ICF), we can now rely on a globally agreed-upon framework and system for classifying the typical spectrum of problems in the functioning of persons given the environmental context in which they live. ICF Core Sets are subgroups of ICF items selected to capture those aspects of functioning that are most likely to be affected by sleep disorders. OBJECTIVE: The objective of this paper is to outline the developmental process for the ICF Core Sets for Sleep. METHODS: The ICF Core Sets for Sleep will be defined at an ICF Core Sets Consensus Conference, which will integrate evidence from preliminary studies, namely (a) a systematic literature review regarding the outcomes used in clinical trials and observational studies, (b) focus groups with people in different regions of the world who have sleep disorders, (c) an expert survey with the involvement of international clinical experts, and (d) a cross-sectional study of people with sleep disorders in different regions of the world. CONCLUSION: The ICF Core Sets for Sleep are being designed with the goal of providing useful standards for research, clinical practice and teaching. It is hypothesized that the ICF Core Sets for Sleep will stimulate research that leads to an improved understanding of functioning, disability, and health in sleep medicine. It is of further hope that such research will lead to interventions and accommodations that improve the restoration and maintenance of functioning and minimize disability among people with sleep disorders throughout the world.

Proposal for an International Molybdenum Isotope Measurement Standard and Data Representation

Molybdenum isotopes are increasingly widely applied in Earth Sciences. They are primarily used to investigate the oxygenation of Earth's ocean and atmosphere. However, more and more fields of application are being developed, such as magmatic and hydrothermal processes, planetary sciences or the tracking of environmental pollution. Here, we present a proposal for a unifying presentation of Mo isotope ratios in the studies of mass-dependent isotope fractionation. We suggest that the δ98/95Mo of the NIST SRM 3134 be defined as +0.25‰. The rationale is that the vast majority of published data are presented relative to reference materials that are similar, but not identical, and that are all slightly lighter than NIST SRM 3134. Our proposed data presentation allows a direct first-order comparison of almost all old data with future work while referring to an international measurement standard. In particular, canonical δ98/95Mo values such as +2.3‰ for seawater and −0.7‰ for marine Fe–Mn precipitates can be kept for discussion. As recent publications show that the ocean molybdenum isotope signature is homogeneous, the IAPSO ocean water standard or any other open ocean water sample is suggested as a secondary measurement standard, with a defined δ98/95Mo value of +2.34 ± 0.10‰ (2s). Les isotopes du molybdène (Mo) sont de plus en plus largement utilisés dans les sciences de la Terre. Ils sont principalement utilisés pour étudier l'oxygénation de l'océan et de l'atmosphère de la Terre. Cependant, de plus en plus de domaines d'application sont en cours de développement, tels que ceux concernant les processus magmatiques et hydrothermaux, les sciences planétaires ou encore le suivi de la pollution environnementale. Ici, nous présentons une proposition de présentation unifiée des rapports isotopiques du Mo dans les études du fractionnement isotopique dépendant de la masse. Nous suggérons que le δ98/95Mo du NIST SRM 3134 soit définit comme étant égal à +0.25 ‰. La raison est que la grande majorité des données publiées sont présentés par rapport à des matériaux de référence qui sont similaires, mais pas identiques, et qui sont tous légèrement plus léger que le NIST SRM 3134. Notre proposition de présentation des données permet une comparaison directe au premier ordre de presque toutes les anciennes données avec les travaux futurs en se référant à un standard international. En particulier, les valeurs canoniques du δ98/95Mo comme celle de +2,3 ‰ pour l'eau de mer et de -0,7 ‰ pour les précipités de Fe-Mn marins peuvent être conservés pour la discussion. Comme les publications récentes montrent que la signature isotopique moyenne du molybdène de l'océan est homogène, le standard de l'eau océanique IAPSO ou tout autre échantillon d'eau provenant de l'océan ouvert sont proposé comme standards secondaires, avec une valeur définie du δ98/95 Mo de 2.34 ± 0.10 ‰ (2s).