Cognitive inertia and the implicit association test

The authors review the implicit association test (IAT), its use in marketing, and the methodology and validity issues that surround it. They focus on a validity problem that has not been investigated previously, namely, the impact of cognitive inertia on IAT effects. Cognitive inertia refers to the difficulty in switching from one categorization rule to another, which causes IAT effects to depend on the order of administration of the two IAT blocks. In Study 1, the authors observe an IAT effect when the compatible block precedes the incompatible block but not when it follows the incompatible block. In Studies 2 and 3, the IAT effect changes its sign when the order of the blocks reverses. Cognitive inertia distorts individual IAT scores and diminishes the correlations between IAT scores and predictor variables when the block order is counterbalanced between subjects. Study 4 shows that counterbalancing the block order repeatedly within subjects can eliminate cognitive inertia effects on the individual level. The authors conclude that researchers should either interpret IAT scores at the aggregate level or, if individual IAT scores are of interest, counterbalance the block order repeatedly within subjects.

Coupling biomechanics to a cellular level model: An approach to patient-specific image driven multi-scale and multi-physics tumor simulation

Modeling of tumor growth has been performed according to various approaches addressing different biocomplexity levels and spatiotemporal scales. Mathematical treatments range from partial differential equation based diffusion models to rule-based cellular level simulators, aiming at both improving our quantitative understanding of the underlying biological processes and, in the mid- and long term, constructing reliable multi-scale predictive platforms to support patient-individualized treatment planning and optimization. The aim of this paper is to establish a multi-scale and multi-physics approach to tumor modeling taking into account both the cellular and the macroscopic mechanical level. Therefore, an already developed biomodel of clinical tumor growth and response to treatment is self-consistently coupled with a biomechanical model. Results are presented for the free growth case of the imageable component of an initially point-like glioblastoma multiforme tumor. The composite model leads to significant tumor shape corrections that are achieved through the utilization of environmental pressure information and the application of biomechanical principles. Using the ratio of smallest to largest moment of inertia of the tumor material to quantify the effect of our coupled approach, we have found a tumor shape correction of 20\% by coupling biomechanics to the cellular simulator as compared to a cellular simulation without preferred growth directions. We conclude that the integration of the two models provides additional morphological insight into realistic tumor growth behavior. Therefore, it might be used for the development of an advanced oncosimulator focusing on tumor types for which morphology plays an important role in surgical and/or radio-therapeutic treatment planning.

The simultaneous role of an alveolus as flow mixer and flow feeder for the deposition of inhaled submicron particles

In an effort to understand the fate of inhaled submicron particles in the small sacs, or alveoli, comprising the gas-exchange region of the lung, we calculated the flow in three-dimensional (3D) rhythmically expanding models of alveolated ducts. Since convection toward the alveolar walls is a precursor to particle deposition, it was the goal of this paper to investigate the streamline maps' dependence upon alveoli location along the acinar tree. On the alveolar midplane, the recirculating flow pattern exhibited closed streamlines with a stagnation saddle point. Off the midplane we found no closed streamlines but nested, funnel-like, spiral, structures (reminiscent of Russian nesting dolls) that were directed towards the expanding walls in inspiration, and away from the contracting walls in expiration. These nested, funnel-like, structures were surrounded by air that flowed into the cavity from the central channel over inspiration and flowed from the cavity to the central channel over expiration. We also found that fluid particle tracks exhibited similar nested funnel-like spiral structures. We conclude that these unique alveolar flow structures may be of importance in enhancing deposition. In addition, due to inertia, the nested, funnel-like, structures change shape and position slightly during a breathing cycle, resulting in flow mixing. Also, each inspiration feeds a fresh supply of particle-laden air from the central channel to the region surrounding the mixing region. Thus, this combination of flow mixer and flow feeder makes each individual alveolus an effective mixing unit, which is likely to play an important role in determining the overall efficiency of convective mixing in the acinus.

Order effects in the IAT

We demonstrate that the IAT is crucially influenced by the order in which the two IAT-blocks are administered. In three studies the IAT-effect is shown to change in magnitude and sign when the order of the ‘compatible’ and the ‘incompatible’ block is reversed. Order effects are caused by cognitive inertia, the difficulty to switch from one categorization rule to another categorization rule. Cognitive inertia distorts correlations between IAT-scores and other variables. While the common practice of counterbalancing block-order between-subjects does not cancel out these distortions, we show in study 4 that counterbalancing block-order repeatedly within-subjects can eliminate order effects.

Educational Expansion and Persistent Inequalities of Education: Utilizing the Subjective Expected Utility Theory to Explain the Increasing Participation Rates in Upper Secondary School in the Federal Republic Of Germany

This investigation attempts to answer the question why more and more parents have chosen the Gymnasium for their children's secondary school education in post‐war West Germany. Based on the theory of subjective expected utility, the crucial mechanisms of parental educational decisions have been emphasized. From this perspective it is assumed that increasing educational motivation coupled with changes in the subjective evaluation of the cost–benefit of education were important conditions for an increasing participation in upper secondary schools. These were, however, in turn, the result of educational expansion. The empirical analyses for three time‐periods in the 1960s, 1970s, and 1980s confirm these assumptions to a large degree. Additionally, empirical evidence was found to suggest that in addition to the intentions of parents and the educational career of their children, structural moments of educational expansion and their own inertia played an important role in the pupils' transition from one educational level to the next. Finally, evidence was found that persistent class‐specific educational inequality stems from a constant balance in the relative cost–benefit advantages between social classes as well as from an increasing difference of primary origin effect between social classes in the realization of their educational choice.

Bildungsexpansion und Bildungsbeteiligung. Oder: warum immer mehr Schulpflichtige das Gymnasium besuchen

Die vorliegende Untersuchung ist ein Beitrag, die Frage zu klären, warum in der westdeutschen Nachkriegszeit immer mehr Schulpflichtige nach Abschluss der Grundschule das Gymnasium besuchen. Ausgehend von einem entscheidungstheoretischen Modell der subjektiven Werterwartung werden Mechanismen der elterlichen Bildungsentscheidung aufgezeigt. Dabei wird davon ausgegangen, dass sowohl zunehmende Bildungsmotivationen als auch Veränderungen in der subjektiven Bewertung von Kosten und Nutzen für eine höhere Bildung wichtige Voraussetzungen für die zunehmende Bildungsbeteiligung, aber auch Folgen der Bildungsexpansion waren. Die empirischen Analysen für drei Zeitpunkte in den 60er, 70er und 80er Jahren bestätigen diese Annahmen weitgehend. Ebenso wurde empirisch belegt, welch wichtige Rolle neben den Bildungsintentionen von Eltern und dem vorhergehenden Bildungsverlauf ihrer Kinder auch strukturelle Momente der Bildungsexpansion und ihre Eigendynamik beim tatsächlichen Bildungsübergang spielen. Schließlich gibt es Hinweise dafür, dass die Persistenz klassenspezifischer Bildungsungleichheiten auf einer konstanten Balance von Nutzen und Kosten zwischen den sozialen Klassen basiert.

Finite Element Based Nonlinear Normalization of Human Lumbar Intervertebral Disc Stiffness to Account for Its Morphology

Disc degeneration, usually associated with low back pain and changes of intervertebral stiffness, represents a major health issue. As the intervertebral disc (IVD) morphology influences its stiffness, the link between mechanical properties and degenerative grade is partially lost without an efficient normalization of the stiffness with respect to the morphology. Moreover, although the behavior of soft tissues is highly nonlinear, only linear normalization protocols have been defined so far for the disc stiffness. Thus, the aim of this work is to propose a nonlinear normalization based on finite elements (FE) simulations and evaluate its impact on the stiffness of human anatomical specimens of lumbar IVD. First, a parameter study involving simulations of biomechanical tests (compression, flexion/extension, bilateral torsion and bending) on 20 FE models of IVDs with various dimensions was carried out to evaluate the effect of the disc's geometry on its compliance and establish stiffness/morphology relations necessary to the nonlinear normalization. The computed stiffness was then normalized by height (H), cross-sectional area (CSA), polar moment of inertia (J) or moments of inertia (Ixx, Iyy) to quantify the effect of both linear and nonlinear normalizations. In the second part of the study, T1-weighted MRI images were acquired to determine H, CSA, J, Ixx and Iyy of 14 human lumbar IVDs. Based on the measured morphology and pre-established relation with stiffness, linear and nonlinear normalization routines were then applied to the compliance of the specimens for each quasi-static biomechanical test. The variability of the stiffness prior to and after normalization was assessed via coefficient of variation (CV). The FE study confirmed that larger and thinner IVDs were stiffer while the normalization strongly attenuated the effect of the disc geometry on its stiffness. Yet, notwithstanding the results of the FE study, the experimental stiffness showed consistently higher CV after normalization. Assuming that geometry and material properties affect the mechanical response, they can also compensate for one another. Therefore, the larger CV after normalization can be interpreted as a strong variability of the material properties, previously hidden by the geometry's own influence. In conclusion, a new normalization protocol for the intervertebral disc stiffness in compression, flexion, extension, bilateral torsion and bending was proposed, with the possible use of MRI and FE to acquire the discs' anatomy and determine the nonlinear relations between stiffness and morphology. Such protocol may be useful to relate the disc's mechanical properties to its degree of degeneration.

The rotation state of 67P/Churyumov-Gerasimenko from approach observations with the OSIRIS cameras on Rosetta

Aims. Approach observations with the Optical, Spectroscopic, and Infrared Remote Imaging System (OSIRIS) experiment onboard Rosetta are used to determine the rotation period, the direction of the spin axis, and the state of rotation of comet 67P’s nucleus. Methods. Photometric time series of 67P have been acquired by OSIRIS since the post wake-up commissioning of the payload in March 2014. Fourier analysis and convex shape inversion methods have been applied to the Rosetta data as well to the available ground-based observations. Results. Evidence is found that the rotation rate of 67P has significantly changed near the time of its 2009 perihelion passage, probably due to sublimation-induced torque. We find that the sidereal rotation periods P1 = 12.76129 ± 0.00005 h and P2 = 12.4043 ± 0.0007 h for the apparitions before and after the 2009 perihelion, respectively, provide the best fit to the observations. No signs of multiple periodicity are found in the light curves down to the noise level, which implies that the comet is presently in a simple rotation state around its axis of largest moment of inertia. We derive a prograde rotation model with spin vector J2000 ecliptic coordinates λ = 65° ± 15°, β = + 59° ± 15°, corresponding to equatorial coordinates RA = 22°, Dec = + 76°. However, we find that the mirror solution, also prograde, at λ = 275° ± 15°, β = + 50° ± 15° (or RA = 274°, Dec = + 27°), is also possible at the same confidence level, due to the intrinsic ambiguity of the photometric problem for observations performed close to the ecliptic plane.

Extending private-collective innovation: a case study

The private-collective innovation model proposes incentives for individuals and firms to privately invest resources to create public goods innovations. Such innovations are characterized by non-rivalry and non-exclusivity in consumption. Examples include open source software, user-generated media products, drug formulas, and sport equipment designs. There is still limited empirical research on private-collective innovation. We present a case study to (1) provide empirical evidence of a case of private-collective innovation, showing specific benefits, and (2) to extend the private-collective innovation model by analyzing the hidden costs for the company involved. We examine the development of the Nokia Internet Tablet, which builds on both proprietary and open source software development, and that involves both Nokia developers and volunteers who are not employed by the company. Seven benefits for Nokia are identified, as are five hidden costs: difficulty to differentiate, guarding business secrets, reducing community entry barriers, giving up control, and organizational inertia. We examine the actions taken by the management to mitigate these costs throughout the development period.

Bone conduction responses of middle ear structures in Thiel embalmed heads

Thiel-embalmed human whole-head specimens offer a promising alternative model for bone conduction (BC) studies of middle ear structures. In this work we present the Thiel model’s linearity and stability over time as well as its possible use in the study of a fixed ossicle chain. Using laser Doppler vibrometry (LDV), the motion of the retroauricular skull, the promontory, the stapes footplate and the round window (RW) were measured. A bone-anchored hearing aid stimulated the ears with step sinus tones logarithmically spread between 0.1 and 10 kHz. Linearity of the model was verified using input levels in steps of 10 dBV. The stability of the Thiel model over time was examined with measurements repeated after hours and weeks. The influence of a cement-fixed stapes was assessed. The middle ear elements measured responded linearly in amplitude for the applied input levels (100, 32.6, and 10 mV). The variability of measurements for both short- (2 h) and long-term (4-16 weeks) repetitions in the same ear was lower than the interindividual difference. The fixation of the stapes induced a lowered RW displacement for frequencies near 750 Hz (-4 dB) and an increased displacement for frequencies above 1 kHz (max. +3.7 dB at 4 kHz). LDV assessment of BC-induced middle ear motion in Thiel heads can be performed with stable results. The vibratory RW response is affected by the fixation of the stapes, indicating a measurable effect of ossicle chain inertia on BC response in Thiel embalmed heads.

Insolation, erosion, and morphology of comet 67P/Churyumov-Gerasimenko

Context. The complex shape of comet 67P and its oblique rotation axis cause pronounced seasonal effects. Irradiation and hence activity vary strongly. Aims. We investigate the insolation of the cometary surface in order to predict the sublimation of water ice. The strongly varying erosion levels are correlated with the topography and morphology of the present cometary surface and its evolution. Methods. The insolation as a function of heliocentric distance and diurnal (spin dependent) variation is calculated using >10(5) facets of a detailed digital terrain model. Shading, but also illumination and thermal radiation by facets in the field of view of a specific facet are iteratively taken into account. We use a two-layer model of a thin porous dust cover above an icy surface to calculate the water sublimation, presuming steady state and a uniform surface. Our second model, which includes the history of warming and cooling due to thermal inertia, is restricted to a much simpler shape model but allows us to test various distributions of active areas. Results. Sublimation from a dirty ice surface yields maximum erosion. A thin dust cover of 50 pm yields similar rates at perihelion. Only about 6% of the surface needs to be active to match the observed water production rates at perihelion. A dust layer of 1 mm thickness suppresses the activity by a factor of 4 to 5. Erosion on the south side can reach more than 10 m per orbit at active spots. The energy input to the concave neck area (Hapi) during northern summer is enhanced by about 50% owing to self-illumination. Here surface temperatures reach maximum values along the foot of the Hathor wall. Integrated over the whole orbit this area receives the least energy input. Based on the detailed shape model, the simulations identify "hot spots" in depressions and larger pits in good correlation with observed dust activity. Three-quarters of the total sublimation is produced while the sub-solar latitude is south, resulting in a distinct dichotomy in activity and morphology. Conclusions. The northern areas display a much rougher morphology than what is seen on Imhotep, an area at the equator that will be fully illuminated when 67P is closer to the Sun. Self-illumination in concave regions enhance the energy input and hence erosion. This explains the early activity observed at Hapi. Cliffs are more prone to erosion than horizontal, often dust covered, areas, which leads to surface planation. Local activity can only persist if the forming cliff walls are eroding. Comet 67P has two lobes and also two distinct sides. Transport of material from the south to the north is probable. The morphology of the Imhotep plain should be typical for the terrains of the yet unseen southern hemisphere.

Thermal and mechanical properties of the near-surface layers of comet 67P/Churyumov-Gerasimenko

Thermal and mechanical material properties determine comet evolution and even solar system formation because comets are considered remnant volatile-rich planetesimals. Using data from the Multipurpose Sensors for Surface and Sub-Surface Science (MUPUS) instrument package gathered at the Philae landing site Abydos on comet 67P/Churyumov-Gerasimenko, we found the diurnal temperature to vary between 90 and 130 K. The surface emissivity was 0.97, and the local thermal inertia was 85 +/- 35 J m(-2) K(-1)s(-1/2). The MUPUS thermal probe did not fully penetrate the near-surface layers, suggesting a local resistance of the ground to penetration of >4 megapascals, equivalent to >2 megapascal uniaxial compressive strength. A sintered near-surface microporous dust-ice layer with a porosity of 30 to 65% is consistent with the data.