Validation of the Swiss Monte Carlo Plan for a static and dynamic 6 MV photon beam

Monte Carlo (MC) based dose calculations can compute dose distributions with an accuracy surpassing that of conventional algorithms used in radiotherapy, especially in regions of tissue inhomogeneities and surface discontinuities. The Swiss Monte Carlo Plan (SMCP) is a GUI-based framework for photon MC treatment planning (MCTP) interfaced to the Eclipse treatment planning system (TPS). As for any dose calculation algorithm, also the MCTP needs to be commissioned and validated before using the algorithm for clinical cases. Aim of this study is the investigation of a 6 MV beam for clinical situations within the framework of the SMCP. In this respect, all parts i.e. open fields and all the clinically available beam modifiers have to be configured so that the calculated dose distributions match the corresponding measurements. Dose distributions for the 6 MV beam were simulated in a water phantom using a phase space source above the beam modifiers. The VMC++ code was used for the radiation transport through the beam modifiers (jaws, wedges, block and multileaf collimator (MLC)) as well as for the calculation of the dose distributions within the phantom. The voxel size of the dose distributions was 2mm in all directions. The statistical uncertainty of the calculated dose distributions was below 0.4%. Simulated depth dose curves and dose profiles in terms of [Gy/MU] for static and dynamic fields were compared with the corresponding measurements using dose difference and γ analysis. For the dose difference criterion of ±1% of D(max) and the distance to agreement criterion of ±1 mm, the γ analysis showed an excellent agreement between measurements and simulations for all static open and MLC fields. The tuning of the density and the thickness for all hard wedges lead to an agreement with the corresponding measurements within 1% or 1mm. Similar results have been achieved for the block. For the validation of the tuned hard wedges, a very good agreement between calculated and measured dose distributions was achieved using a 1%/1mm criteria for the γ analysis. The calculated dose distributions of the enhanced dynamic wedges (10°, 15°, 20°, 25°, 30°, 45° and 60°) met the criteria of 1%/1mm when compared with the measurements for all situations considered. For the IMRT fields all compared measured dose values agreed with the calculated dose values within a 2% dose difference or within 1 mm distance. The SMCP has been successfully validated for a static and dynamic 6 MV photon beam, thus resulting in accurate dose calculations suitable for applications in clinical cases.

Occurence of Chai Hu (Bupleuri Radix) in Prescriptions of Chinese Herbal Medicine in Switzerland

Background: Chai hu (Bupleuri radix), one of the most frequently used herbs in Chinese herbal medicine, has 3 major functions, depending on dosage and combination with other herbs. The aim of this study was to investigate how chai hu is prescribed in everyday practice in Switzerland, and whether these prescription patterns reflect its various applications. Methods: A random sample of 1,053 prescriptions was drawn from the database of Lian Chinaherb AG, Wollerau, Switzerland, and analyzed regarding the most frequently used classical formulas containing chai hu, daily dosages and combinations with other herbs. Results: 29.0% of all prescriptions contained chai hu, and 98.0% of these were in granular form. The most frequently used classical formulas were xiao yao san (‘rambling powder’), jia wei xiao yao san (‘augmented rambling powder’) and chai hu shu gan san (‘Bupleurum powder to spread the liver’). In more than half of the prescriptions, chai hu was combined with bai shao (Paeoniae Radix Alba), dang gui (Angelicae sinensis radix) or fu ling (Poria). 51.8% of the prescriptions contained a low daily dosage of chai hu, 24.9% a medium and 15.1% a high dosage. Conclusion: Chai hu was generally prescribed in classic combinations with other herbs and in a medium dosage. Due to the addition of supplementary herbs to classical formulas, its daily dose was often diminished from a high or medium dose to a low dose. This raises the question if chai hu would then still exert its desired function of, e.g., moving liver-qi in these prescriptions

An efficient framework for photon Monte Carlo treatment planning

Currently photon Monte Carlo treatment planning (MCTP) for a patient stored in the patient database of a treatment planning system (TPS) can usually only be performed using a cumbersome multi-step procedure where many user interactions are needed. This means automation is needed for usage in clinical routine. In addition, because of the long computing time in MCTP, optimization of the MC calculations is essential. For these purposes a new graphical user interface (GUI)-based photon MC environment has been developed resulting in a very flexible framework. By this means appropriate MC transport methods are assigned to different geometric regions by still benefiting from the features included in the TPS. In order to provide a flexible MC environment, the MC particle transport has been divided into different parts: the source, beam modifiers and the patient. The source part includes the phase-space source, source models and full MC transport through the treatment head. The beam modifier part consists of one module for each beam modifier. To simulate the radiation transport through each individual beam modifier, one out of three full MC transport codes can be selected independently. Additionally, for each beam modifier a simple or an exact geometry can be chosen. Thereby, different complexity levels of radiation transport are applied during the simulation. For the patient dose calculation, two different MC codes are available. A special plug-in in Eclipse providing all necessary information by means of Dicom streams was used to start the developed MC GUI. The implementation of this framework separates the MC transport from the geometry and the modules pass the particles in memory; hence, no files are used as the interface. The implementation is realized for 6 and 15 MV beams of a Varian Clinac 2300 C/D. Several applications demonstrate the usefulness of the framework. Apart from applications dealing with the beam modifiers, two patient cases are shown. Thereby, comparisons are performed between MC calculated dose distributions and those calculated by a pencil beam or the AAA algorithm. Interfacing this flexible and efficient MC environment with Eclipse allows a widespread use for all kinds of investigations from timing and benchmarking studies to clinical patient studies. Additionally, it is possible to add modules keeping the system highly flexible and efficient.

Hip2Norm: an object-oriented cross-platform program for 3D analysis of hip joint morphology using 2D pelvic radiographs

We developed an object-oriented cross-platform program to perform three-dimensional (3D) analysis of hip joint morphology using two-dimensional (2D) anteroposterior (AP) pelvic radiographs. Landmarks extracted from 2D AP pelvic radiographs and optionally an additional lateral pelvic X-ray were combined with a cone beam projection model to reconstruct 3D hip joints. Since individual pelvic orientation can vary considerably, a method for standardizing pelvic orientation was implemented to determine the absolute tilt/rotation. The evaluation of anatomically morphologic differences was achieved by reconstructing the projected acetabular rim and the measured hip parameters as if obtained in a standardized neutral orientation. The program had been successfully used to interactively objectify acetabular version in hips with femoro-acetabular impingement or developmental dysplasia. Hip(2)Norm is written in object-oriented programming language C++ using cross-platform software Qt (TrollTech, Oslo, Norway) for graphical user interface (GUI) and is transportable to any platform.

Prescriptions of Chinese medicinal herbs in Switzerland: the example of suan zao ren (Ziziphi Spinosae Semen)

Introduction According to the Swiss Health Survey 2007, 1.7% of the adult population use traditional Chinese medicine (including Chinese herbal medicine, but excluding acupuncture). In contrast to conventional drugs, that contain single chemically defined substances, prescriptions of Chinese herbs are mixtures of up to 40 ingredients (parts of plants, fungi, animal substances and minerals). Originally they were taken in the form of decoctions, but nowadays granules are more popular. Medium daily dosages of granules range between 8 to 12g. In a recent work we identified the most commonly used Chinese herbs (all ingredients are referred to as herbs for reasons of simplicity) and classical formulas (mixtures). Here we present a short overview and the example of suan zao ren (Ziziphi Spinosae Semen), which is used in the treatment of insomnia and anxiety and contains saponins that have been shown to increase sleep in animal studies. Material and Methods A random sample of 1,053 prescriptions was drawn from the database of Lian Chinaherb AG, Switzerland, and analysed according to the most frequently used individual herbs and classical formulas. Cluster analysis (Jaccard similarity coefficient, complete linkage method) was applied to identify common combinations of herbs. Results The most frequently used herbs were dang gui (Angelicae Sinensis Radix), fu ling (Poria), bai shao (Paeoniae Radix Alba), and gan cao (Glycyrrhizae Radix et Rhizoma); the most frequently used classical formulas were gui pi tang (Restore the Spleen Decoction) and xiao yao san (Rambling Powder). The average number of herbs per prescription was 12.0, and the average daily dosage of granules was 8.7g. 74.3% of the prescriptions were for female, 24.8% for male patients. Suan zao ren was present in 14.2% of all prescriptions. These prescriptions contained on average 13.7 herbs, and the daily dosage of granules was 8.9g. Suan zao ren was more frequently prescribed by practitioners of non-Asian than of Asian origin but equally often for female and male patients. Cluster analysis grouped suan zao ren with yuan zhi (Polygalae Radix), bai zi ren (Platycladi Semen), sheng di huang (Rehmanniae Radix) and dan shen (Salviae Miltiorrhizae Radix et Rhizoma). Discussion Prescriptions including suan zao ren contained on average slightly more herbs than other prescriptions. This might be due to the fact that two of the three most popular classical formulas with suan zao ren are composed of 13 and 12 herbs with the possibility of adding more ingredients when necessary. Cluster analysis resulted in the clustering of suan zao ren with other herbs of the classical formula tian wang bu xin dan (Emperor of Heaven’s Special Pill to Tonify the Heart), indicating the use of suan zao ren for the treatment of insomnia and irritability. Unfortunately, the diagnoses of the patients were unavailable and thus correlations between use of suan zao ren and diseases could not be analysed.