TILLING for Mutations in Model Plants and Crops

A growing world population, changing climate and limiting fossil fuels will provide new pressures on human production of food, medicine, fuels and feed stock in the twenty-first century. Enhanced crop production promises to ameliorate these pressures. Crops can be bred for increased yields of calories, starch, nutrients, natural medicinal compounds, and other important products. Enhanced resistance to biotic and abiotic stresses can be introduced, toxins removed, and industrial qualities such as fibre strength and biofuel per mass can be increased. Induced and natural mutations provide a powerful method for the generation of heritable enhanced traits. While mainly exploited in forward, phenotype driven, approaches, the rapid accumulation of plant genomic sequence information and hypotheses regarding gene function allows the use of mutations in reverse genetic approaches to identify lesions in specific target genes. Such gene-driven approaches promise to speed up the process of creating novel phenotypes, and can enable the generation of phenotypes unobtainable by traditional forward methods. TILLING (Targeting Induced Local Lesions IN Genome) is a high-throughput and low cost reverse genetic method for the discovery of induced mutations. The method has been modified for the identification of natural nucleotide polymorphisms, a process called Ecotilling. The methods are general and have been applied to many species, including a variety of different crops. In this chapter the current status of the TILLING and Ecotilling methods and provide an overview of progress in applying these methods to different plant species, with a focus on work related to food production for developing nations.

Increasing Food Production in Africa by Boosting the Productivity of Understudied Crops

The Green Revolution has enabled Asian countries to boost their crop production enormously. However, Africa has not benefitted from this agricultural revolution since it did not consider local, but important crops grown in the continent. In addition to their versatile adaptation to extreme environmental conditions, African indigenous crops provide income for subsistence farmers and serve as staple food for the vast majority of low-income consumers. These crops, which are composed of cereals, legumes, vegetables and root crops, are commonly known as underutilized or orphan crops. Recently, some of these under-researched crops have received the attention of the national and international research community, and modern improvement techniques including diverse genetic and genomic tools have been applied in order to boost their productivity. The major bottlenecks affecting the productivity of these crops are unimproved genetic traits such as low yield and poor nutritional status and environmental factors such as drought, weeds and pests. Hence, an agricultural revolution is needed to increase food production of these under-researched crops in order to feed the ever-increasing population in Africa. Here, we present both the benefits and drawbacks of major African crops, the efforts being made to improve them, and suggestions for some future directions.

Nectar distribution and its relation to food quality in honeybee (Apis mellifera) colonies

In honeybees (Apis niellifera), the process of nectar collection is considered a straightforward example of task partitioning with two subtasks or two intersecting cycles of activity: (1) foraging and (2) storing of nectar, linked via its transfer between foragers and food processors. Many observations suggest, however, that nectar colleclion and processing in honeybees is a complex process, involving workers of other sub-castes and depending on variables such as resource profitability or the amount of stored honey. It has been observed that food processor bees often distribute food to other hive bees after receiving it from incoming foragers, instead of storing it immediately in honey cells. While there is little information about the sub-caste affiliation and the behaviour of these second-order receivers, this stage may be important for the rapid distribution of nutrients and related information. To investigate the identity of these second-order receivers, we quantified behaviours following nectar transfer and compared these behaviours with the behaviour of average worker hive-bees. Furthermore, we tested whether food quality (sugar concentration) affects the behaviour of the second-order receivers. Of all identified second-order receivers, 59.3% performed nurse duties, 18.5% performed food-processor duties and 22.2% performed forager duties. After food intake, these bees were more active, had more trophallaxes (especially offering contacts) compared to average workers and they were found mainly in the brood area, independent of food quality. Our results show that the liquid food can be distributed rapidly among many bees of the three main worker sub-castes, without being stored in honey cells first. Furthermore, the results suggest that the rapid distribution of food partly depends on the high activity of second-order receivers.

Advanced production scheduling for batch plants in process industries

An Advanced Planning System (APS) offers support at all planning levels along the supply chain while observing limited resources. We consider an APS for process industries (e.g. chemical and pharmaceutical industries) consisting of the modules network design (for long–term decisions), supply network planning (for medium–term decisions), and detailed production scheduling (for short–term decisions). For each module, we outline the decision problem, discuss the specifi cs of process industries, and review state–of–the–art solution approaches. For the module detailed production scheduling, a new solution approach is proposed in the case of batch production, which can solve much larger practical problems than the methods known thus far. The new approach decomposes detailed production scheduling for batch production into batching and batch scheduling. The batching problem converts the primary requirements for products into individual batches, where the work load is to be minimized. We formulate the batching problem as a nonlinear mixed–integer program and transform it into a linear mixed–binary program of moderate size, which can be solved by standard software. The batch scheduling problem allocates the batches to scarce resources such as processing units, workers, and intermediate storage facilities, where some regular objective function like the makespan is to be minimized. The batch scheduling problem is modelled as a resource–constrained project scheduling problem, which can be solved by an efficient truncated branch–and–bound algorithm developed recently. The performance of the new solution procedures for batching and batch scheduling is demonstrated by solving several instances of a case study from process industries.

Occurrence and Genetic Characteristics of Third-Generation Cephalosporin-Resistant Escherichia coli in Swiss Retail Meat

Prevalence and genetic relatedness were determined for third-generation cephalosporin-resistant Escherichia coli (3GC-R-Ec) detected in Swiss beef, veal, pork, and poultry retail meat. Samples from meat-packing plants (MPPs) processing 70% of the slaughtered animals in Switzerland were purchased at different intervals between April and June 2013 and analyzed. Sixty-nine 3GC-R-Ec isolates were obtained and characterized by microarray, PCR/DNA sequencing, Multi Locus Sequence Typing (MLST), and plasmid replicon typing. Plasmids of selected strains were transformed by electroporation into E. coli TOP10 cells and analyzed by plasmid MLST. The prevalence of 3GC-R-Ec was 73.3% in chicken and 2% in beef meat. No 3GC-R-Ec were found in pork and veal. Overall, the blaCTX-M-1 (79.4%), blaCMY-2 (17.6%), blaCMY-4 (1.5%), and blaSHV-12 (1.5%) β-lactamase genes were detected, as well as other genes conferring resistance to chloramphenicol (cmlA1-like), sulfonamides (sul), tetracycline (tet), and trimethoprim (dfrA). The 3GC-R-Ec from chicken meat often harbored virulence genes associated with avian pathogens. Plasmid incompatibility (Inc) groups IncI1, IncFIB, IncFII, and IncB/O were the most frequent. A high rate of clonality (e.g., ST1304, ST38, and ST93) among isolates from the same MPPs suggests that strains persist at the plant and spread to meat at the carcass-processing stage. Additionally, the presence of the blaCTX-M-1 gene on an IncI1 plasmid sequence type 3 (IncI1/pST3) in genetically diverse strains indicates interstrain spread of an epidemic plasmid. The blaCMY-2 and blaCMY-4 genes were located on IncB/O plasmids. This study represents the first comprehensive assessment of 3GC-R-Ec in meat in Switzerland. It demonstrates the need for monitoring contaminants and for the adaptation of the Hazard Analysis and Critical Control Point concept to avoid the spread of multidrug-resistant bacteria through the food chain.

Food Volume Computation for Self Dietary Assessment Applications

There is great demand for easily-accessible, user-friendly dietary self-management applications. Yet accurate, fully-automatic estimation of nutritional intake using computer vision methods remains an open research problem. One key element of this problem is the volume estimation, which can be computed from 3D models obtained using multi-view geometry. The paper presents a computational system for volume estimation based on the processing of two meal images. A 3D model of the served meal is reconstructed using the acquired images and the volume is computed from the shape. The algorithm was tested on food models (dummy foods) with known volume and on real served food. Volume accuracy was in the order of 90 %, while the total execution time was below 15 seconds per image pair. The proposed system combines simple and computational affordable methods for 3D reconstruction, remained stable throughout the experiments, operates in near real time, and places minimum constraints on users.

Enhancing Food Sovereignty and Food Security through the Revitalization of Indigenous Knowledge: Experiences from the Bolivian Andes

Endogenous development is defined as development that values primarily locally available resources and the way people organized themselves for that purpose. It is a dynamic and evolving concept that also embraces innovations and complementation from other than endogenous sources of knowledge; however, only as far as they are based on mutual respect and the recognition of cultural and socioeconomic self-determination of each of the parties involved. Experiences that have been systematized in the context of the BioAndes Program are demonstrating that enhancing food security and food sovereignty on the basis of endogenous development can be best achieved by applying a ‘biocultural’ perspective: This means to promote and support actions that are simultaneously valuing biological (fauna, flora, soils, or agrobiodiversity) and sociocultural resources (forms of social organization, local knowledge and skills, norms, and the related worldviews). In Bolivia, that is one of the Latin-American countries with the highest levels of poverty (79% of the rural population) and undernourishment (22% of the total population), the Program BioAndes promotes food sovereignty and food security by revitalizing the knowledge of Andean indigenous people and strengthening their livelihood strategies. This starts by recognizing that Andean people have developed complex strategies to constantly adapt to highly diverse and changing socioenvironmental conditions. These strategies are characterized by organizing the communities, land use and livelihoods along a vertical gradient of the available eco-climatic zones; the resulting agricultural systems are evolving around the own sociocultural values of reciprocity and mutual cooperation, giving thus access to an extensive variety of food, fiber and energy sources. As the influences of markets, competition or individualization are increasingly affecting the life in the communities, people became aware of the need to find a new balance between endogenous and exogenous forms of knowledge. In this context, BioAndes starts by recognizing the wealth and potentials of local practices and aims to integrate its actions into the ongoing endogenous processes of innovation and adaptation. In order to avoid external impositions and biases, the program intervenes on the basis of a dialogue between exogenous, mainly scientific, and indigenous forms of knowledge. The paper presents an analysis of the strengths and weaknesses of enhancing endogenous development through a dialogue between scientific and indigenous knowledge by specifically focusing on its effects on food sovereignty and food security in three ‘biocultural’ rural areas of the Bolivian highlands. The paper shows how the dialogue between different forms of knowledge evolved alongside the following project activities: 1) recuperation and renovation of local seeds and crop varieties (potato – Solanum spp., quinoa – Chenopodium quinoa, cañahua – Chenopodium pallidicaule); 2) support for the elaboration of community-based norms and regulations for governing access and distribution of non-timber forest products, such as medicinal, fodder, and construction plants; 3) revitalization of ethnoveterinary knowledge for sheep and llama breeding; 4) improvement of local knowledge about the transformation of food products (sheep-cheese, lacayote – Cucurbita sp. - jam, dried llama meat, fours of cañahua and other Andean crops). The implementation of these activities fostered the community-based livelihoods of indigenous people by complementing them with carefully and jointly designed innovations based on internal and external sources of knowledge and resources. Through this process, the epistemological and ontological basis that underlies local practices was made visible. On this basis, local and external actors started to jointly define a renewed concept of food security and food sovereignty that, while oriented in the notions of well being according to a collectively re-crafted world view, was incorporating external contributions as well. Enabling and hindering factors, actors and conditions of these processes are discussed in the paper.

Role of Crop Research and Development in food Security of Africa

Food security is the main concern in Africa as the production and productivity of crops are under continuous threat. Indigenous crops also known as orphan- or as underutilized- crops provide key contributions to food security under the present scenario of increasing world population and changing climate. Hence, these crops which belong to the major categories of cereals, legumes, fruits and root crops play a key role in the livelihood of the resource-poor farmers and consumers since they perform better than the major world crops under extreme soil and climate conditions prevalent in the continent. These indigenous crops have the major advantage that they fit well into the general socio-economic and ecological context of the region. However, despite their huge importance, African crops have generally received little attention by the global scientific community. With the current production systems, only a fraction of yield potential was achieved for most of these crops. In order to devise strategies towards boosting crop productivity in Africa, the current production constraints should be investigated and properly addressed. Key traits known to increase productivity and/or improve nutrition and diverse conventional and modern crop improvement techniques need to be implemented. Commitments in the value-chain from the research, production, marketing to distribution of improved seeds are required by relevant national and international institutions as well as African governments to promote food security in a sustainable manner. The review also presents major achievements and suggestions for stakeholders interested in African agriculture.

The stable isotopic composition of Daphnia ephippia reflects changes in δ13C and δ18O values of food and water

The stable isotopic composition of fossil resting eggs (ephippia) of Daphnia spp. is being used to reconstruct past environmental conditions in lake ecosystems. However, the underlying assumption that the stable isotopic composition of the ephippia reflects the stable isotopic composition of the parent Daphnia, of their diet and of the environmental water have yet to be confirmed in a controlled experimental setting. We performed experiments with Daphnia pulicaria cultures, which included a control treatment conducted at 12 °C in filtered lake water and with a diet of fresh algae and three treatments in which we manipulated the stable carbon isotopic composition (δ13C value) of the algae, stable oxygen isotopic composition (δ18O value) of the water and the water temperature, respectively. The stable nitrogen isotopic composition (δ15N value) of the algae was similar for all treatments. At 12 °C, differences in algal δ13C values and in δ18O values of water were reflected in those of Daphnia. The differences between ephippia and Daphnia stable isotope ratios were similar in the different treatments (δ13C: +0.2 ± 0.4 ‰ (standard deviation); δ15N: −1.6 ± 0.4 ‰; δ18O: −0.9 ± 0.4 ‰), indicating that changes in dietary δ13C values and in δ18O values of water are passed on to these fossilizing structures. A higher water temperature (20 °C) resulted in lower δ13C values in Daphnia and ephippia than in the other treatments with the same food source and in a minor change in the difference between δ13C values of ephippia and Daphnia (to −1.3 ± 0.3 ‰). This may have been due to microbial processes or increased algal respiration rates in the experimental containers, which may not affect Daphnia in natural environments. There was no significant difference in the offset between δ18O and δ15N values of ephippia and Daphnia between the 12 and 20 °C treatments, but the δ18O values of Daphnia and ephippia were on average 1.2 ‰ lower at 20 °C than at 12 °C. We conclude that the stable isotopic composition of Daphnia ephippia provides information on that of the parent Daphnia and of the food and water they were exposed to, with small offsets between Daphnia and ephippia relative to variations in Daphnia stable isotopic composition reported from downcore studies. However, our experiments also indicate that temperature may have a minor influence on the δ13C, δ15N and δ18O values of Daphnia body tissue and ephippia. This aspect deserves attention in further controlled experiments.