Improving residency training with the help of multisource feedback: Generation of a model of influencing factors

Background: Feedback is considered to be one of the most important drivers of learning. One form of structured feedback used in medical settings is multisource feedback (MSF). This feedback technique provides the opportunity to gain a differentiated view on a doctor’s performance from several perspectives using a questionnaire and a facilitating conversation, in which learning goals are formulated. While many studies have been conducted on the validity, reliability and feasibility of the instrument, little is known about the impact of factors that might influence the effects of MSF on clinical performance. Summary of Work: To study under which circumstances MSF is most effective, we performed a literature review on Google Scholar with focus on MSF and feedback in general. Main key-words were: MSF, multi-source-feedback, multi source feedback, and feedback each combined with influencing/ hindering/ facilitating factors, effective, effectiveness, doctors-intraining, and surgery. Summary of Results: Based on the literature, we developed a preliminary model of facilitating factors. This model includes five main factors influencing MSF: questionnaire, doctor-in-training, group of raters, facilitating supervisor, and facilitating conversation. Discussion and Conclusions: Especially the following points that might influence MSF have not yet been sufficiently studied: facilitating conversation with the supervisor, individual aspects of doctors-in-training, and the causal relations between influencing factors. Overall there are only very few studies focusing on the impact of MSF on actual and long-term performance. We developed a preliminary model of hindering and facilitating factors on MSF. Further studies are needed to better understand under which circumstances MSF is most effective. Take-home messages: The preliminary model might help to guide further studies on how to implement MSF to use it at its full potential.

Challenge stressors: longitudinal effects on self attitudes, work attitudes, and health.

Recent research suggests that some stressors (i.e. hindrance stressors) have mainly negative consequences, whereas others (i.e. challenge stressors) can simultaneously have positive and negative consequences (e.g., LePine et al., 2005). Although a number of studies have dealt with potential outcomes of challenge stressors, some criteria have received only limited attention (e.g., positive self-attitudes; cf. Widmer et al., 2012), and some have been neglected altogether (i.e., physical health outcomes). Furthermore, while sophisticated methods – such as meta-analyses (e.g., LePine et al., 2005), diary studies (Ohly & Fritz, 2010), and multi-source analyses (Wallace et al., 2009) – have been applied to the framework, there are no longitudinal studies. We report results from a longitudinal study containing three waves, with two time-lags of one month each (N = 393). We analyzed relationships between challenge stressors and work attitudes (e.g. job satisfaction), self attitudes (e.g. self-esteem), and health indicators (e.g. sleep quality) using cross-lagged SEM. We expected positive effects of challenge stressors to appear only when their negative variance is controlled (e.g. by including hindrance stressors as a suppressor variable; cf. Cavanaugh et al., 2000). As the positive aspects of challenge stressors relate to self-affirming experiences, we also expected positive effects to be especially strong for self attitudes. Regarding work attitudes, the only significant paths found were from work attitudes to challenge stressors over both time lags. Regarding health, there was a significant cross-sectional association at time 1, which was negative, as expected. Longitudinally, a positive path from challenge stressors to health for both time lags was found only when hindrances stressors were controlled, confirming the expected suppressor effect. Hindrance stressors had a negative effect on health. For self-attitudes, there was a positive cross-sectional association at time one. In addition, a positive effect on self attitudes was found longitudinally for both time lags, but only when hindrance stressors were controlled. Additional analyses showed that the positive longitudinal effect on health was mediated by self attitudes. Although the lack of associations with work attitudes was surprising, our results indicate that challenge stressors contain aspects that provide an opportunity to develop self-esteem through demanding work situations, thereby contributing to personal growth and thriving at the workplace. They also confirm the ambiguous nature of challenge stressors, as, with one exception, positive effects were found only when hindrance stressors were controlled (cf. Widmer et al., 2012). Finally, our results confirm the importance of self-related attitudes in the stress process.

Replaying past changes in multi-developer projects

What was I working on before the weekend? and What were the members of my team working on during the last week? are common questions that are frequently asked by a developer. They can be answered if one keeps track of who changes what in the source code. In this work, we present Replay, a tool that allows one to replay past changes as they happened at a fine-grained level, where a developer can watch what she has done or understand what her colleagues have done in past development sessions. With this tool, developers are able to not only understand what sequence of changes brought the system to a certain state (e.g., the introduction of a defect), but also deduce reasons for why her colleagues performed those changes. One of the applications of such a tool is also discovering the changes that broke the code of a developer.

Advances of dual source, dual-energy imaging in postmortem CT

This paper focuses on the use of multi-detector row dual-energy computed tomography (DECT) in the evaluation of postmortal examinations. The use of dual energy moves postmortem CT to an entirely new dimension of diagnostic sensitivity where contrast in the image is not merely limited to X-ray attenuation differences, but may include elements of functional and tissue characterization. This additional information may be used to improve the benefit postmortem imaging can provide to supplement and simplify the conventional autopsy.

Multi-locus microsatellite analysis supports the hypothesis of an autochthonous focus of Echinococcus multilocularis in northern Italy

Echinococcus multilocularis is characterised by a wide geographical distribution, encompassing three continents (North America, Asia and Europe) yet very low genetic variability is documented. Recently, this parasite has been detected in red foxes (Vulpes vulpes) circulating in an Alpine region of Italy, close to Austria. This finding raised the question as to whether an autochthonous cycle exists in Italy or whether the infected foxes originated from the neighbouring regions of Austria. Studies have shown that multi-locus microsatellite analysis can identify genomic regions carrying mutations that result in a local adaptation. We used a tandem repeated multi-locus microsatellite (EmsB) to evaluate the genetic differences amongst adult worms of E. multilocularis collected in Italy, worms from neighbouring Austria and from other European and extra-European countries. Fluorescent PCR was performed on a panel of E. multilocularis samples to assess intra-specific polymorphism. The analysis revealed four closed genotypes for Italian samples of E. multilocularis which were unique compared with the other 25 genotypes from Europe and the five genotypes from Alaska. An analysis in the Alpine watershed, comparing Italian adult worms with those from neighbouring areas in Austria, showed a unique cluster for Italian samples. This result supports the hypothesis of the presence of an autochthonous cycle of E. multilocularis in Italy. EmsB can be useful for 'tracking' the source of infection of this zoonotic parasite and developing appropriate measures for preventing or reducing the risk of human alveolar echinococcosis.

Source attribution of human Campylobacter isolates by MLST and fla-typing and association of genotypes with quinolone resistance

Campylobacteriosis is the most frequent zoonosis in developed countries and various domestic animals can function as reservoir for the main pathogens Campylobacter jejuni and Campylobacter coli. In the present study we compared population structures of 730 C. jejuni and C. coli from human cases, 610 chicken, 159 dog, 360 pig and 23 cattle isolates collected between 2001 and 2012 in Switzerland. All isolates had been typed with multi locus sequence typing (MLST) and flaB-typing and their genotypic resistance to quinolones was determined. We used complementary approaches by testing for differences between isolates from different hosts with the proportion similarity as well as the fixation index and by attributing the source of the human isolates with Bayesian assignment using the software STRUCTURE. Analyses were done with MLST and flaB data in parallel and both typing methods were tested for associations of genotypes with quinolone resistance. Results obtained with MLST and flaB data corresponded remarkably well, both indicating chickens as the main source for human infection for both Campylobacter species. Based on MLST, 70.9% of the human cases were attributed to chickens, 19.3% to cattle, 8.6% to dogs and 1.2% to pigs. Furthermore we found a host independent association between sequence type (ST) and quinolone resistance. The most notable were ST-45, all isolates of which were susceptible, while for ST-464 all were resistant.

A multi-tracer study of groundwater origin and transit-time in the aquifers of the Venice region (Italy)

Located in the northeastern region of Italy, the Venetian Plain (VP) is a sedimentary basin containing an extensively exploited groundwater system. The northern part is characterised by a large undifferentiated phreatic aquifer constituted by coarse grain alluvial deposits and recharged by local rainfalls and discharges from the rivers Brenta and Piave. The southern plain is characterised by a series of aquitards and sandy aquifers forming a well-defined artesian multi-aquifer system. In order to determine origins, transit times and mixing proportions of different components in groundwater (GW), a multi tracer study (H, He/He, C, CFC, SF, Kr, Ar, Sr/Sr, O, H, cations, and anions) has been carried out in VP between the rivers Brenta and Piave. The geochemical pattern of GW allows a distinction of the different water origins in the system, in particular based on View the MathML source HCO3-,SO42-,Ca/Mg,NO3-, O, H. A radiogenic Sr signature clearly marks GW originated from the Brenta and Tertiary catchments. End-member analysis and geochemical modelling highlight the existence of a mixing process involving waters recharged from the Brenta and Piave rivers, from the phreatic aquifer and from another GW reservoirs characterised by very low mineralization. Noble gas excesses in respect to atmospheric equilibrium occur in all samples, particularly in the deeper aquifers of the Piave river, but also in phreatic water of the undifferentiated aquifers. He–H ages in the phreatic aquifer and in the shallower level of the multi-aquifer system indicate recharge times in the years 1970–2008. The progression of H–He ages with the distance from the recharge areas together with initial tritium concentration (H + Hetrit) imply an infiltration rate of about 1 km/y and the absence of older components in these GW. SF and Kr data corroborate these conclusions. H − He ages in the deeper artesian aquifers suggest a dilution process with older, tritium free waters. C Fontes–Garnier model ages of the old GW components range from 1 to 12 ka, yielding an apparent GW velocity of about 1–10 m/y. Increase of radiogenic He follows the progression of C ages. Ar, radiogenic He and C tracers yield model-dependent age-ranges in overall good agreement once diffusion of C from aquitards, GW dispersion, lithogenic Ar production, and He production-rate heterogeneities are taken into account. The rate of radiogenic He increase with time, deduced by comparison with C model ages, is however very low compared to other studies. Comparison with C and C data obtained 40 years ago on the same aquifer system shows that exploitation of GW caused a significant loss of the old groundwater reservoir during this time.

Pangea: A Workbench for Statically Analyzing Multi-Language Software Corpora

Software corpora facilitate reproducibility of analyses, however, static analysis for an entire corpus still requires considerable effort, often duplicated unnecessarily by multiple users. Moreover, most corpora are designed for single languages increasing the effort for cross-language analysis. To address these aspects we propose Pangea, an infrastructure allowing fast development of static analyses on multi-language corpora. Pangea uses language-independent meta-models stored as object model snapshots that can be directly loaded into memory and queried without any parsing overhead. To reduce the effort of performing static analyses, Pangea provides out-of-the box support for: creating and refining analyses in a dedicated environment, deploying an analysis on an entire corpus, using a runner that supports parallel execution, and exporting results in various formats. In this tool demonstration we introduce Pangea and provide several usage scenarios that illustrate how it reduces the cost of analysis.

Towards Information-Centric Wireless Multi-hop Communication

Information-centric networking (ICN) addresses drawbacks of the Internet protocol, namely scalability and security. ICN is a promising approach for wireless communication because it enables seamless mobile communication, where intermediate or source nodes may change, as well as quick recovery from collisions. In this work, we study wireless multi-hop communication in Content-Centric Networking (CCN), which is a popular ICN architecture. We propose to use two broadcast faces that can be used in alternating order along the path to support multi-hop communication between any nodes in the network. By slightly modifying CCN, we can reduce the number of duplicate Interests by 93.4 % and the number of collisions by 61.4 %. Furthermore, we describe and evaluate different strategies for prefix registration based on overhearing. Strategies that configure prefixes only on one of the two faces can result in at least 27.3 % faster data transmissions.

European experience with the second-generation Edwards SAPIEN XT transcatheter heart valve in patients with severe aortic stenosis: 1-year outcomes from the SOURCE XT Registry

OBJECTIVES The SOURCE XT Registry (Edwards SAPIEN XT Aortic Bioprosthesis Multi-Region Outcome Registry) assessed the use and clinical outcomes with the SAPIEN XT (Edwards Lifesciences, Irvine, California) valve in the real-world setting. BACKGROUND Transcatheter aortic valve replacement is an established treatment for high-risk/inoperable patients with severe aortic stenosis. The SAPIEN XT is a balloon-expandable valve with enhanced features allowing delivery via a lower profile sheath. METHODS The SOURCE XT Registry is a prospective, multicenter, post-approval study. Data from 2,688 patients at 99 sites were analyzed. The main outcome measures were all-cause mortality, stroke, major vascular complications, bleeding, and pacemaker implantations at 30-days and 1 year post-procedure. RESULTS The mean age was 81.4 ± 6.6 years, 42.3% were male, and the mean logistic EuroSCORE (European System for Cardiac Operative Risk Evaluation) was 20.4 ± 12.4%. Patients had a high burden of coronary disease (44.2%), diabetes (29.4%), renal insufficiency (28.9%), atrial fibrillation (25.6%), and peripheral vascular disease (21.2%). Survival was 93.7% at 30 days and 80.6% at 1 year. At 30-day follow-up, the stroke rate was 3.6%, the rate of major vascular complications was 6.5%, the rate of life-threatening bleeding was 5.5%, the rate of new pacemakers was 9.5%, and the rate of moderate/severe paravalvular leak was 5.5%. Multivariable analysis identified nontransfemoral approach (hazard ratio [HR]: 1.84; p < 0.0001), renal insufficiency (HR: 1.53; p < 0.0001), liver disease (HR: 1.67; p = 0.0453), moderate/severe tricuspid regurgitation (HR: 1.47; p = 0.0019), porcelain aorta (HR: 1.47; p = 0.0352), and atrial fibrillation (HR: 1.41; p = 0.0014), with the highest HRs for 1-year mortality. Major vascular complications and major/life-threatening bleeding were the most frequently seen complications associated with a significant increase in 1-year mortality. CONCLUSIONS The SOURCE XT Registry demonstrated appropriate use of the SAPIEN XT THV in the first year post-commercialization in Europe. The safety profile is sustained, and clinical benefits have been established in the real-world setting. (SOURCE XT Registry; NCT01238497).

Dynamic Unicast: Information-Centric Multi-hop Routing for Mobile Ad-hoc Networks

Abstract Information-centric networking (ICN) offers new perspectives on mobile ad-hoc communication because routing is based on names but not on endpoint identifiers. Since every content object has a unique name and is signed, authentic content can be stored and cached by any node. If connectivity to a content source breaks, it is not necessarily required to build a new path to the same source but content can also be retrieved from a closer node that provides the same content copy. For example, in case of collisions, retransmissions do not need to be performed over the entire path but due to caching only over the link where the collision occurred. Furthermore, multiple requests can be aggregated to improve scalability of wireless multi-hop communication. In this work, we base our investigations on Content-Centric Networking (CCN), which is a popular {ICN} architecture. While related works in wireless {CCN} communication are based on broadcast communication exclusively, we show that this is not needed for efficient mobile ad-hoc communication. With Dynamic Unicast requesters can build unicast paths to content sources after they have been identified via broadcast. We have implemented Dynamic Unicast in CCNx, which provides a reference implementation of the {CCN} concepts, and performed extensive evaluations in diverse mobile scenarios using NS3-DCE, the direct code execution framework for the {NS3} network simulator. Our evaluations show that Dynamic Unicast can result in more efficient communication than broadcast communication, but still supports all {CCN} advantages such as caching, scalability and implicit content discovery.

Entwicklung eines deutschsprachigen Fragebogens zur Durchführung von Multisource-Feedback in der ärztlichen Weiterbildung

Fragestellung/Einleitung: Multisource-Feedback (MSF) ist ein anerkanntes Instrument zur Überprüfung und Verbesserung der ärztlichen Tätigkeit [1]. Es beinhaltet Feedback, das von MitarbeiterInnen verschiedener Tätigkeitsbereiche und verschiedener Hierarchiestufen gegeben wird. Das Feedback wird anonym mithilfe eines Fragebogens gegeben, der verschiedene Kriterien der ärztlichen Kompetenz beschreibt. Das Feedback wird anschlieβend für die zu beurteilenden ÄrztInnen in einem Gespräch von einer/m SupervisorIn zusammengefasst. Bislang existiert kein deutschsprachiger Fragebogen für Multisource-Feedback für die ärztliche Tätigkeit. Unsere Zielsetzung war es daher, einen deutschsprachigen Fragebogen zu erstellen und diesen bzgl. relevanter Validitätskriterien zu untersuchen. Methoden: Zur Erstellung des Fragebogens sammelten wir die beste verfügbare Evidenz der entsprechenden Literatur. Wir wählten einen validierten englischen Fragebogen, der bereits in der Weiterbildung in Groβbritannien angewendet wird [2] und den wichtigsten Kriterien entspricht. Dieser wurde übersetzt und in einigen Bereichen erweitert, um ihn sprachlichen Gegebenheiten und lokalen Bedürfnissen anzupassen. Bezüglich der Validität wurden zwei Kriterien untersucht: Inhaltsvalidität (content validity evidence) und Antwortprozesse (response process validity evidence). Um die Inhaltsvalidität zu untersuchen, wurde in einer Expertenrunde diskutiert, ob der übersetzte Fragebogen die erwarteten Kompetenzen widerspiegelt. Im Anschluss wurden die Antwortprozesse mithilfe eines sog. „think-alouds“ mit ÄrztInnen in Weiterbildung und ihren AusbilderInnen untersucht. Ergebnisse: Der resultierende Fragebogen umfasst 20 Fragen. Davon sind 15 Items den Bereichen „Klinische Fähigkeiten“, „Umgang mit Patienten“, „Umgang mit Kollegen“ und „Arbeitsweise“ zuzuordnen. Diese Fragen werden auf einer fünfstufigen Likert-Skala beantwortet. Zusätzlich bietet jede Frage die Möglichkeit, einen Freitext zu besonderen Stärken und Schwächen der KandidatInnen aufzuführen. Weiterhin gibt es fünf globale Fragen zu Stärken und Verbesserungsmöglichkeiten, äuβeren Einflüssen, den Arbeitsbedingungen und nach Zweifeln an der Gesundheit oder Integrität des Arztes/ der Ärztin. In der Expertenrunde wurde der Fragebogen als für den deutschsprachigen Raum ohne Einschränkungen anwendbar eingeschätzt. Die Analyse der Antwortprozesse führte zu kleineren sprachlichen Anpassungen und bestätigt, dass der Fragebogen verständlich und eindeutig zu beantworten ist und das gewählte Konstrukt der ärztlichen Tätigkeit vollständig umschreibt. Diskussion/Schlussfolgerung: Wir entwickelten einen deutschsprachigen Fragebogen zur Durchführung von Multisource-Feedback in der ärztlichen Weiterbildung. Wir fanden Hinweise für die Validität dieses Fragebogens bzgl. des Inhalts und der Antwortprozesse. Zusätzliche Untersuchungen zur Validität wie z.B. die durch den Fragebogen entstehenden Auswirkungen (consequences) sind vorgesehen. Dieser Fragebogen könnte zum breiteren Einsatz von MSF in der ärztlichen Weiterbildung auch im deutschsprachigen Raum beitragen. This is an Open Access article distributed under the terms of the Creative Commons Attribution License. You are free: to Share - to copy, distribute and transmit the work, provided the original author and source are credited. See license information at http://creativecommons.org/licenses/by-nc-nd/3.0/.