In vitro precision of fit of computer-aided designed and computer-aided manufactured titanium screw-retained fixed dental prostheses before and after ceramic veneering

OBJECTIVE To compare the precision of fit of full-arch implant-supported screw-retained computer-aided designed and computer-aided manufactured (CAD/CAM) titanium-fixed dental prostheses (FDP) before and after veneering. The null-hypothesis was that there is no difference in vertical microgap values between pure titanium frameworks and FDPs after porcelain firing. MATERIALS AND METHODS Five CAD/CAM titanium grade IV frameworks for a screw-retained 10-unit implant-supported reconstruction on six implants (FDI tooth positions 15, 13, 11, 21, 23, 25) were fabricated after digitizing the implant platforms and the cuspid-supporting framework resin pattern with a laser scanner (CARES(®) Scan CS2; Institut Straumann AG, Basel, Switzerland). A bonder, an opaquer, three layers of porcelain, and one layer of glaze were applied (Vita Titankeramik) and fired according to the manufacturer's preheating and fire cycle instructions at 400-800°C. The one-screw test (implant 25 screw-retained) was applied before and after veneering of the FDPs to assess the vertical microgap between implant and framework platform with a scanning electron microscope. The mean microgap was calculated from interproximal and buccal values. Statistical comparison was performed with non-parametric tests. RESULTS All vertical microgaps were clinically acceptable with values <90 μm. No statistically significant pairwise difference (P = 0.98) was observed between the relative effects of vertical microgap of unveneered (median 19 μm; 95% CI 13-35 μm) and veneered FDPs (20 μm; 13-31 μm), providing support for the null-hypothesis. Analysis within the groups showed significantly different values between the five implants of the FDPs before (P = 0.044) and after veneering (P = 0.020), while a monotonous trend of increasing values from implant 23 (closest position to screw-retained implant 25) to 15 (most distant implant) could not be observed (P = 0.169, P = 0.270). CONCLUSIONS Full-arch CAD/CAM titanium screw-retained frameworks have a high accuracy. Porcelain firing procedure had no impact on the precision of fit of the final FDPs. All implant microgap measurements of each FDP showed clinically acceptable vertical misfit values before and after veneering. Thus, the results do not only show accurate performance of the milling and firing but show also a reproducible scanning and designing process.

Food Security and Agri-Foreign Direct Investment in Weak States: Finding the Governance Gap to Avoid ‘Land Grab’

Food security is important. A rising world population coupled with climate change creates growing pressure on global world food supplies. States alleviate this pressure domestically by attracting agri-foreign direct investment (agri-FDI). This is a high-risk strategy for weak states: the state may gain valuable foreign currency, technology and debt-free growth; but equally, investors may fail to deliver on their commitments and exploit weak domestic legal infrastructure to ‘grab’ large areas of prime agricultural land, leaving only marginal land for domestic production. A net loss to local food security and to the national economy results. This is problematic because the state must continue to guarantee its citizens’ right to food and property. Agri-FDI needs close regulation to maximise its benefit. This article maps the multilevel system of governance covering agri-FDI. We show how this system creates asymmetric rights in favour of the investor to the detriment of the host state’s food security and how these problems might be alleviated.

Regional Trade Agreements and domestic labour market regulation

This chapter discusses the relationship between labour market regulation and regional trade agreements from both a legal and an economic angle. We examine empirically whether regional trade liberalisation is associated with deterioration (“race to the bottom”) of domestic labour standards beyond those reflected in the 1998 ILO Declaration on the Fundamental Principles and Rights at Work. Using a panel of 90 developed and developing countries, covering the years from 1980 to 2005, we find that after the entry into force of a regional trade agreement (RTA), labour standards applying to employment protection and unemployment benefits are significantly weakened. We show that such a lowering of protection levels tends to occur in high income countries and that this effect mainly stems from RTAs among such countries rather than with low or middle income countries. Concern about competitive pressure to weaken domestic labour regulation is reflected in a variety of undertakings in RTAs not to administer labour laws with a view to improving one’s competitive position in trade or foreign direct investment (FDI). The above-mentioned empirical findings indicate that such provisions could potentially become relevant, and that this is more likely to be the case for high income members of RTAs. Our analysis, from a legal point of view, of relevant institutional and procedural mechanisms indicates however that enforceability of the relevant provisions is weak for most of the existing legal texts.

Precision of fit of implant-supported screw-retained 10-unit computer-aided-designed and computer-aided-manufactured frameworks made from zirconium dioxide and titanium: an in vitro study

OBJECTIVE To analyze the precision of fit of implant-supported screw-retained computer-aided-designed and computer-aided-manufactured (CAD/CAM) zirconium dioxide (ZrO) frameworks. MATERIALS AND METHODS Computer-aided-designed and computer-aided-manufactured ZrO frameworks (NobelProcera) for a screw-retained 10-unit implant-supported reconstruction on six implants (FDI positions 15, 13, 11, 21, 23, 25) were fabricated using a laser (ZrO-L, N = 6) and a mechanical scanner (ZrO-M, N = 5) for digitizing the implant platform and the cuspid-supporting framework resin pattern. Laser-scanned CAD/CAM titanium (TIT-L, N = 6) and cast CoCrW-alloy frameworks (Cast, N = 5) fabricated on the same model and designed similar to the ZrO frameworks were the control. The one-screw test (implant 25 screw-retained) was applied to assess the vertical microgap between implant and framework platform with a scanning electron microscope. The mean microgap was calculated from approximal and buccal values. Statistical comparison was performed with non-parametric tests. RESULTS No statistically significant pairwise difference was observed between the relative effects of vertical microgap between ZrO-L (median 14 μm; 95% CI 10-26 μm), ZrO-M (18 μm; 12-27 μm) and TIT-L (15 μm; 6-18 μm), whereas the values of Cast (236 μm; 181-301 μm) were significantly higher (P < 0.001) than the three CAD/CAM groups. A monotonous trend of increasing values from implant 23 to 15 was observed in all groups (ZrO-L, ZrO-M and Cast P < 0.001, TIT-L P = 0.044). CONCLUSIONS Optical and tactile scanners with CAD/CAM technology allow for the fabrication of highly accurate long-span screw-retained ZrO implant-reconstructions. Titanium frameworks showed the most consistent precision. Fit of the cast alloy frameworks was clinically inacceptable.

The story of Community preference for food security

"Préférence communautaire" is an in-built notion of the CAP since its inception with the Treaty of Rome (1957). Its’ simple objective laid down at the Stresa Conference in 1958 is to prefer community produce over imports wherever possible, while at the same time promoting agricultural exports and FDI (“vocation exportatrice de l’Europe”). Does this contrast or correlate with the notion of “food sovereignty” which originated in 1996 as a notion of small farmer self-sufficiency (Via Campesina), and which now has found its way into the official EC discourse? Recent CAP reforms indeed seem to continue banking on border protection and on the occasional export subsidy. Nonetheless, coming together with claims to mitigate climate change, “food sovereignty” à la CAP fails to acknowledge efficiency losses at home and negative spillover effects on the right to food of food exporting developing countries. This chapter asks whether new non-tariff and domestic support measures are just new wine in the old cask of fortress Europe, together with the FDI promotion instruments of the FED and others. Might the increasing dynamics and new challenges of agricultural trade and investment lead to lower market and production shares for European farms? It concludes that in the medium term the WTO Green Box has the only legal and effective tools to promote EU agriculture and food.

CAD/CAM fabrication accuracy of long- vs. short-span implant-supported FDPs

OBJECTIVE To compare the precision of fit of long-span vs. short-span implant-supported screw-retained fixed dental prostheses (FDPs) made from computer-aided-design/computer-aided-manufactured (CAD/CAM) titanium and veneered with ceramic. The null hypothesis was that there is no difference in the vertical microgap between long-span and short-span FDPs. MATERIALS AND METHODS CAD/CAM titanium frameworks for an implant-supported maxillary FDP on implants with a flat platform were fabricated on one single master cast. Group A consisted of six 10-unit FDPs connected to six implants (FDI positions 15, 13, 11, 21, 23, 25) and group B of six 5-unit FDPs (three implants, FDI positions 21, 23, 25). The CAD/CAM system from Biodenta Swiss AG (Berneck, Switzerland) was used for digitizing (laser scanner) the master cast and anatomical CAD of each framework separately. The frameworks were milled (CAM) from a titanium grade V monobloc and veneered with porcelain. Median vertical distance between implant and FDP platforms from the non-tightened implants (one-screw test on implant 25) was calculated from mesial, buccal, and distal scanning electron microscope measurements. RESULTS All measurements showed values <40 μm. Total median vertical microgaps were 23 μm (range 2-38 μm) for group A and 7 μm (4-24 μm) for group B. The difference between the groups was statistically significant at implant 21 (P = 0.002; 97.5% CI -27.3 to -4.9) and insignificant at implant 23 (P = 0.093; -3.9 to 1.0). CONCLUSIONS CAD/CAM fabrication including laboratory scanning and porcelain firing was highly precise and reproducible for all long- and short-span FDPs. While all FDPs showed clinically acceptable values, the short-span FDPs were statistically more precise at the 5-unit span distance.

Disciplining Investment Incentives: A Lost Cause?

An E15 Initiative think piece: Investment incentives rank among the most important policy instruments governments employ to influence the locational decisions of multinational firms. In the wake of the recent increase in locational competition and the growing impact of investment incentives and support measures for state-owned enterprises (SOEs), the need for enhanced disciplines on investment incentives has gained political and academic salience. This think piece explores the evolution of investment incentives from a development and rule-making perspective. It summarises the existing literature and examines current practices and recent trends in FDI flows and the use of various investment incentives. This is followed by a discussion of the reasons for the observed stalemate in attempts at disciplinary rule-making. The paper concludes by putting forth recommendations for data gathering and transparency that could further the move toward improved global governance founded on the increasing complementarities of trade, investment, and competition law and policy as the core pillars of a more open, inclusive, and just world economy.

Trade Policy, Investment and Migration: The Liberalisation Paradigm

Presentation by Thomas Cottier & Charlotte Sieber-Gasser prepared for the Markets for Migration and Development (M4MD) Conference, Bern, 13-15 September 2011. This presentation is part of Session 1 "Why Trade, Development and Migration?" of the M4MD conference, which was one of the thematic meetings held in the context of the 2011 Global Forum on Migration and Development (GFMD) chaired by Switzerland. Session 1 seeked to understand to what extent international trade and foreign direct investment drives migration and why states find it more difficult to liberalise the trans‐boundary movement of persons than to liberalise cross‐border trade in goods and services. One discussed aspect was why globalisation, trade liberalisation and FDI can lead not only to more, but also to less migration and what the corresponding effects on development would be. This Session provided a timely opportunity to broaden the perspective on international migration and explore the interaction between migration, development and trade policymaking.

Sino-African State Trading in Services: Added-Value through Angola-Model loaning, GATS commitments or FTAs?

Paper presented by Charlotte Sieber-Gasser at the 5th Annual TRAPCA Conference, Arusha (Tanzania), 25-26 November 2010. Despite the increasing volume of trade between China and African countries, not one single conventional free trade agreement (FTA) or economic partnership agreement (EPA) has yet been signed between an African country and China. Initially, Sino-African trade relations were to a very large extent centred on investments secured through bilateral investment agreements (BITs). The more recent Chinese investments on the African continent, however, are more informally based on FDI contracts with the state at the receiving end and a government-owned private company as the investor, or loosely attached to loans commonly known under term ‘the Angola-Model’. This rather unusual basis for economic integration and development assistance, outside the trodden path of free trade agreements and ODA, requires further analysis in order to understand how the current legal framework between China and the African continent impacts economic development and national sovereignty, and what kind of distributive consequences it may have.