Coronal plane segmental flexibility in thoracic adolescent idiopathic scoliosis assessed by fulcrum-bending radiographs

Knowledge about segmental flexibility in adolescent idiopathic scoliosis is crucial for a better biomechanical understanding, particularly for the development of fusionless, growth-guiding techniques. Currently, there is lack of data in this field. The objective of this study was, therefore, to compute segmental flexibility indices (standing angle minus corrected angle/standing angle). We compared segmental disc angles in 76 preoperative sets of standing and fulcrum-bending radiographs of thoracic curves (paired, two-tailed t tests, p < 0.05). The mean standing Cobb angle was 59.7 degrees (range 41.3 degrees -95 degrees ) and the flexibility index of the curve was 48.6\% (range 16.6-78.8\%). The disc angles showed symmetric periapical distribution with significant decrease (all p values <0.0001) for every cephalad (+) and caudad (-) level change. The periapical levels +1 and -1 wedged at 8.3 degrees and 8.7 degrees (range 3.5 degrees -14.8 degrees ), respectively. All angles were significantly smaller on the-bending views (p values <0.0001). We noted mean periapical flexibility indices of 46\% (+1), 49\% (-1), 57\% (+2) and 81\% (-2), which were significantly less (p < 0.001) than for the group of remote levels 105\% (+3), 149\% (-3), 231\% (+4) and 300\% (-4). The discal and bony wedging was 60 and 40\%, respectively, and mean values 35 degrees and 24 degrees (p < 0.0001). Their relationship with the Cobb angle showed a moderate correlation (r = 0.56 and 0.45). Functional, radiographic analysis of idiopathic thoracic scoliosis revealed significant, homogenous segmental tethering confined to four periapical levels. Future research will aim at in vivo segmental measurements in three planes under defined load to provide in-depth data for novel therapeutic strategies.

Language Boxes: Bending the Host Language with Modular Language Changes

As domain-specific modeling begins to attract widespread acceptance, pressure is increasing for the development of new domain-specific languages. Unfortunately these DSLs typically conflict with the grammar of the host language, making it difficult to compose hybrid code except at the level of strings; few mechanisms (if any) exist to control the scope of usage of multiple DSLs; and, most seriously, existing host language tools are typically unaware of the DSL extensions, thus hampering the development process. Language boxes address these issues by offering a simple, modular mechanism to encapsulate (i) compositional changes to the host language, (ii) transformations to address various concerns such as compilation and highlighting, and (iii) scoping rules to control visibility of language extensions. We describe the design and implementation of language boxes, and show with the help of several examples how modular extensions can be introduced to a host language and environment.

A comparative assessment of forces and moments generated by lingual and conventional brackets

The aim of this study was to assess the effect of bracket type on the labiopalatal forces and moments generated in the sagittal plane. Incognito™ lingual brackets (3M Unitek), STb™ lingual brackets (Light Lingual System; ORMCO), and conventional 0.018 inch slot brackets (Gemini; 3M Unitek) were bonded on three identical maxillary acrylic resin models, with a palatally displaced right lateral incisor. The transfer trays for the indirect bonding of the lingual brackets were constructed in certified laboratories. Each model was mounted on the orthodontic measurement and simulation system and ten 0.013 inch CuNiTi wires were used for each bracket type. The wire was ligated with elastomerics and each measurement was repeated once after re-ligation. The labiopalatal forces and the moments in the sagittal plane were recorded on the right lateral incisor. One-way analysis of variance and post hoc Scheffe pairwise comparisons were used to assess the effect on bracket type on the generated forces and moments. The magnitude of forces ranged from 1.62, 1.27, and 1.81 N for the STb, conventional, and Incognito brackets, respectively; the corresponding moments were 2.01, 1.45, and 2.19 N mm, respectively. Bracket type was a significant predictor of the generated forces (P < 0.001) and moments (P < 0.001). The produced forces were different among all three bracket types, whereas the generated moments differed between conventional and lingual brackets but not between lingual brackets.

Measuring the bending of asymmetric planar EAP structures

The geometric characterization of low-voltage dielectric electro-active polymer (EAP) structures, comprised of nanometer thickness but areas of square centimeters, for applications such as artificial sphincters requires methods with nanometer precision. Direct optical detection is usually restricted to sub-micrometer resolution because of the wavelength of the light applied. Therefore, we propose to take advantage of the cantilever bending system with optical readout revealing a sub-micrometer resolution at the deflection of the free end. It is demonstrated that this approach allows us to detect bending of rather conventional planar asymmetric, dielectric EAP-structures applying voltages well below 10 V. For this purpose, we built 100 μm-thin silicone films between 50 nm-thin silver layers on a 25 μm-thin polyetheretherketone (PEEK) substrate. The increase of the applied voltage in steps of 50 V until 1 kV resulted in a cantilever bending that exhibits only in restricted ranges the expected square dependence. The mean laser beam displacement on the detector corresponded to 6 nm per volt. The apparatus will therefore become a powerful mean to analyze and thereby improve low-voltage dielectric EAP-structures to realize nanometer-thin layers for stack actuators to be incorporated into artificial sphincter systems for treating severe urinary and fecal incontinence.

Finite Element Based Nonlinear Normalization of Human Lumbar Intervertebral Disc Stiffness to Account for Its Morphology

Disc degeneration, usually associated with low back pain and changes of intervertebral stiffness, represents a major health issue. As the intervertebral disc (IVD) morphology influences its stiffness, the link between mechanical properties and degenerative grade is partially lost without an efficient normalization of the stiffness with respect to the morphology. Moreover, although the behavior of soft tissues is highly nonlinear, only linear normalization protocols have been defined so far for the disc stiffness. Thus, the aim of this work is to propose a nonlinear normalization based on finite elements (FE) simulations and evaluate its impact on the stiffness of human anatomical specimens of lumbar IVD. First, a parameter study involving simulations of biomechanical tests (compression, flexion/extension, bilateral torsion and bending) on 20 FE models of IVDs with various dimensions was carried out to evaluate the effect of the disc's geometry on its compliance and establish stiffness/morphology relations necessary to the nonlinear normalization. The computed stiffness was then normalized by height (H), cross-sectional area (CSA), polar moment of inertia (J) or moments of inertia (Ixx, Iyy) to quantify the effect of both linear and nonlinear normalizations. In the second part of the study, T1-weighted MRI images were acquired to determine H, CSA, J, Ixx and Iyy of 14 human lumbar IVDs. Based on the measured morphology and pre-established relation with stiffness, linear and nonlinear normalization routines were then applied to the compliance of the specimens for each quasi-static biomechanical test. The variability of the stiffness prior to and after normalization was assessed via coefficient of variation (CV). The FE study confirmed that larger and thinner IVDs were stiffer while the normalization strongly attenuated the effect of the disc geometry on its stiffness. Yet, notwithstanding the results of the FE study, the experimental stiffness showed consistently higher CV after normalization. Assuming that geometry and material properties affect the mechanical response, they can also compensate for one another. Therefore, the larger CV after normalization can be interpreted as a strong variability of the material properties, previously hidden by the geometry's own influence. In conclusion, a new normalization protocol for the intervertebral disc stiffness in compression, flexion, extension, bilateral torsion and bending was proposed, with the possible use of MRI and FE to acquire the discs' anatomy and determine the nonlinear relations between stiffness and morphology. Such protocol may be useful to relate the disc's mechanical properties to its degree of degeneration.

Transformative deliberative moments among ex-combattants in Colombia

This dissertation presents the concept of Deliberative Transformative Moment and the instrument to identify it, in a further attempt to bridge the gap between deliberation theory and practice. A transformative moment in the deliberative process occurs when the level of deliberation is either lifted from low to high or drops from high to low. In order to identify such a moment, one has to look at the context and dynamics of the group discussion. This broadening of the unit of analysis is a big difference from other existing instruments to measure the level of deliberation, such as the Deliberative Quality Index –DQI, which focuses primarily on the individual speech acts. Consistent with the theoretical framework of consociational and deliberation approaches, the observed discussions took place among two deeply divided groups, Colombian ex-combatants from both the extreme left and the extreme right. Moving beyond a pure Habermasian perspective, this study finds that besides pure rational arguments, there are some contexts in which personal stories, jokes and self-interests, acting as justification of arguments, have either a positive or a negative impact on deliberative transformative moments. Although this research has a strongly qualitative orientation, reliability tests scored high, giving it strength as a reliable and valid research method that shedding some light on the sort of speech acts that enhance deliberation and those that detract from it.

Moments of tension and strain in psychotherapy and how they promote a good alliance and outcome

It is well established that the therapeutic relationship contributes about as much to therapy outcome as ‘technical’ intervention. Furthermore, it follows clear prescriptive concepts in the same manner as technical interventions do. ‘Motive Oriented Therapeutic Relationship’ is such a concept for establishing a solid basis for whatever therapeutic work the patients’ problems require (Grawe, 1980, 1992; Caspar, 1996). Yet, the therapeutic relationship doesn’t explain everything because other factors play a significant role too. Previous studies showed that outcome is clearly better when therapists achieved a generally high quality of a therapeutic relationship when they did not shy away from possibly threatening interventions such as confrontations. This ratio of a fruitful alliance and marginally present confrontations in the same session also showed significant correlations with patient’s assessment of alliance and progress in therapy (Figlioli et al., 2009). The current state of research in the field, however, does not give any answers to questions like how good and bad confrontations can be characterized or what role does the intensity, respectively frequency of confrontations play in the process of psychotherapy. Therefore, we analyzed a sample of 80 therapies of 3 sessions each representing either good or bad outcome. Independent raters judged moment by moment how therapists used confrontative interventions. 20 cases, which showed an excellent or a very poor outcome, as well as an unexpected pattern were analyzed in further quantitative details. We found that confrontations are correlated to good outcome when they are uttered implicitly, related to an important topic of the patient (e.g. one of the defined therapy goals), long but weak, embedded in prior complementarity and not in the first three sessions of a therapy, as well as not an interactional discrepancy between the patient and the therapist.

Shaping gender inequalities: critical moments and critical places

Purpose – There is much scientific interest in the connection between the emergence of gender-based inequalities and key biographical transition points of couples in long-term relationships. Little empirical research is available comparing the evolution of a couple’s respective professional careers over space and time. The purpose of this paper is to contribute to filling this gap by addressing the following questions: what are the critical biographical moments when gender (in)equalities within a relationship begin to arise and consolidate? Which biographical decisions precede and follow such critical moments? How does decision making at critical moments impact the opportunities of both relationship partners in gaining equal access to paid employment? Design/methodology/approach – These questions are addressed from the perspectives of intersectionality and economic citizenship. Biographical interviewing is used to collect the personal and professional narratives of Swiss-, bi-national and migrant couples. The case study of a Swiss-Norwegian couple illustrates typical processes by which many skilled migrant women end up absently or precariously employed. Findings – Analysis reveals that the Scandinavian woman’s migration to Switzerland is a primary and critical moment for emerging inequality, which is then reinforced by relocation (to a small town characterized by conservative gender values) and the subsequent births of their children. It is concluded that factors of traditional gender roles, ethnicity and age intersect to create a hierarchical situation which affords the male Swiss partner more weight in terms of decision making and career advancement. Practical implications – The paper’s findings are highly relevant to the formulation of policies regarding gender inequalities and the implementation of preventive programmes within this context. Originality/value – Little empirical research is available comparing the evolution of a couple’s respective professional careers over space and time. The originality of this paper is to fill this research gap; to include migration as a critical moment for gender inequalities; to use an intersectional and geographical perspective that have been given scant attention in the literature; to use the original concept of economic citizenship; and to examine the case of a bi-national couple, which has so far not been examined by the literature on couple relationships.