Chronic stimulation of the globus pallidus internus for treatment of non-dYT1 generalized dystonia and choreoathetosis: 2-year follow up

OBJECT: The authors studied the long-term efficacy of deep brain stimulation (DBS) of the posteroventral lateral globus pallidus internus up to 2 years postoperatively in patients with primary non-DYT1 generalized dystonia or choreoathetosis. The results are briefly compared with those reported for DBS in DYT1 dystonia (Oppenheim dystonia), which is caused by the DYT1 gene. METHODS: Enrollment in this prospective expanded pilot study was limited to adult patients with severely disabling, medically refractory non-DYT1 generalized dystonia or choreoathetosis. Six consecutive patients underwent follow-up examinations at defined intervals of 3 months, 1 year, and 2 years postsurgery. There were five women and one man, and their mean age at surgery was 45.5 years. Formal assessments included both the Burke-Fahn-Marsden dystonia scale and the recently developed Unified Dystonia Rating Scale. Two patients had primary generalized non-DYT1 dystonia, and four suffered from choreoathetosis secondary to infantile cerebral palsy. Bilateral quadripolar DBS electrodes were implanted in all instances, except in one patient with markedly asymmetrical symptoms. There were no adverse events related to surgery. The Burke-Fahn-Marsden scores in the two patients with generalized dystonia improved by 78 and 71% at 3 months, by 82 and 69% at 1 year, and by 78 and 70% at 2 years postoperatively. This was paralleled by marked amelioration of disability scores. The mean improvement in Burke-Fahn-Marsden scores in patients with choreoathetosis was 12% at 3 months, 29% at 1 year, and 23% at 2 years postoperatively, which was not significant. Two of these patients thought that they had achieved marked improvement at 2 years postoperatively, although results of objective evaluations were less impressive. In these two patients there was a minor but stable improvement in disability scores. All patients had an improvement in pain scores at the 2-year follow-up review. Medication was tapered off in both patients with generalized dystonia and reduced in two of the patients with choreoathetosis. All stimulation-induced side effects were reversible on adjustment of the DBS settings. Energy consumption of the batteries was considerably higher than in patients with Parkinson disease. CONCLUSIONS: Chronic pallidal DBS is a safe and effective procedure in generalized non-DYT1 dystonia, and it may become the procedure of choice in patients with medically refractory dystonia. Postoperative improvement of choreoathetosis is more modest and varied, and subjective ratings of outcome may exceed objective evaluations.

Energy harvesting from the cardiovascular system, or how to get a little help from yourself

Human energy harvesting is envisioned as a remedy to the weight, the size, and the poor energy density of primary batteries in medical implants. The first implant to have necessarily raised the idea of a biological power supply was the pacemaker in the early 1960s. So far, review articles on human energy harvesting have been rather unspecific and no tribute has been given to the early role of the pacemaker and the cardiovascular system in triggering research in the field. The purpose of the present article is to provide an up-to-date review of research efforts targeting the cardiovascular system as an alternative energy source for active medical implants. To this end, a chronological survey of the last 14 most influential publications is proposed. They include experimental and/or theoretical studies based on electromagnetic, piezoelectric, or electrostatic transducers harnessing various forms of energy, such as heart motion, pressure gradients, and blood flow. Technical feasibility does not imply clinical applicability: although most of the reported devices were shown to harvest an interesting amount of energy from a physiological environment, none of them were tested in vivo for a longer period of time.Human energy harvesting is envisioned as a remedy to the weight, the size, and the poor energy density of primary batteries in medical implants. The first implant to have necessarily raised the idea of a biological power supply was the pacemaker in the early 1960s. So far, review articles on human energy harvesting have been rather unspecific and no tribute has been given to the early role of the pacemaker and the cardiovascular system in triggering research in the field. The purpose of the present article is to provide an up-to-date review of research efforts targeting the cardiovascular system as an alternative energy source for active medical implants. To this end, a chronological survey of the last 14 most influential publications is proposed. They include experimental and/or theoretical studies based on electromagnetic, piezoelectric, or electrostatic transducers harnessing various forms of energy, such as heart motion, pressure gradients, and blood flow. Technical feasibility does not imply clinical applicability: although most of the reported devices were shown to harvest an interesting amount of energy from a physiological environment, none of them were tested in vivo for a longer period of time.

Vascular turbine powering a cardiac pacemaker: an in-vivo case study

Background: Today’s medical devices are powered by batteries with a limited energy storage capacity. Depleted batteries have to be replaced, exposing the patients to the risk of adverse events. Thus, a method for harvesting energy inside the body is desirable since it would allow building devices without batteries. Methods: A miniaturized intravascular Tesla turbine was implanted as an arteriovenous shunt between the common carotid artery and external jugular vein of a pig. The harvested energy was used to power a custom-built temporary cardiac pacemaker. Results: At a flow rate of ~150 ml/min, an output power of 0.4 mW was measured. Successful ventricular pacing was performed. Conclusion: Harvesting energy from the circulation using an intravascular turbine is technically feasible and provides enough energy to power a cardiac pacemaker.

Design and Realization of an Energy Harvester Using Pulsating Arterial Pressure

Most medical implants run on batteries, which require costly and tedious replacement or recharging. It is believed that micro-generators utilizing intracorporeal energy could solve these problems. However, such generators do not, at this time, meet the energy requirements of medical implants.This paper highlights some essential aspects of designing and implementing a power source that scavenges energy from arterial expansion and contraction to operate an implanted medical device. After evaluating various potentially viable transduction mechanisms, the fabricated prototype employs an electromagnetic transduction mechanism. The artery is inserted into a laboratory-fabricated flexible coil which is permitted to freely deform in a magnetic field. This work also investigates the effects of the arterial wall's material properties on energy harvesting potential. For that purpose, two types of arteries (Penrose X-ray tube, which behave elastically, and an artery of a Göttinger minipig, which behaves viscoelastically) were tested. No noticeable difference could be observed between these two cases. For the pig artery, average harvestable power was 42 nW. Moreover, peak power was 2.38 μW. Both values are higher than those of the current state of the art (6 nW/16 nW). A theoretical modelling of the prototype was developed and compared to the experimental results.

A new rechargeable device for deep brain stimulation: a prospective patient satisfaction survey

Background: Deep brain stimulation (DBS) is highly successful in treating Parkinson's disease (PD), dystonia, and essential tremor (ET). Until recently implantable neurostimulators were nonrechargeable, battery-driven devices, with a lifetime of about 3-5 years. This relatively short duration causes problems for patients (e.g. programming and device-use limitations, unpredictable expiration, surgeries to replace depleted batteries). Additionally, these batteries (relatively large with considerable weight) may cause discomfort. To overcome these issues, the first rechargeable DBS device was introduced: smaller, lighter and intended to function for 9 years. Methods: Of 35 patients implanted with the rechargeable device, 21 (including 8 PD, 10 dystonia, 2 ET) were followed before and 3 months after surgery and completed a systematic survey of satisfaction with the rechargeable device. Results: Overall patient satisfaction was high (83.3 ± 18.3). Dystonia patients tended to have lower satisfaction values for fit and comfort of the system than PD patients. Age was significantly negatively correlated with satisfaction regarding process of battery recharging. Conclusions: Dystonia patients (generally high-energy consumption, severe problems at the DBS device end-of-life) are good, reliable candidates for a rechargeable DBS system. In PD, younger patients, without signs of dementia and good technical understanding, might have highest benefit.

Successful pacing using a batteryless sunlight-powered pacemaker.

AIMS Today's cardiac pacemakers are powered by batteries with limited energy capacity. As the battery's lifetime ends, the pacemaker needs to be replaced. This surgical re-intervention is costly and bears the risk of complications. Thus, a pacemaker without primary batteries is desirable. The goal of this study was to test whether transcutaneous solar light could power a pacemaker. METHODS AND RESULTS We used a three-step approach to investigate the feasibility of sunlight-powered cardiac pacing. First, the harvestable power was estimated. Theoretically, a subcutaneously implanted 1 cm(2) solar module may harvest ∼2500 µW from sunlight (3 mm implantation depth). Secondly, ex vivo measurements were performed with solar cells placed under pig skin flaps exposed to a solar simulator and real sunlight. Ex vivo measurements under real sunlight resulted in a median output power of 4941 µW/cm(2) [interquartile range (IQR) 3767-5598 µW/cm(2), median skin flap thickness 3.0 mm (IQR 2.7-3.3 mm)]. The output power strongly depended on implantation depth (ρSpearman = -0.86, P < 0.001). Finally, a batteryless single-chamber pacemaker powered by a 3.24 cm(2) solar module was implanted in vivo in a pig to measure output power and to pace. In vivo measurements showed a median output power of >3500 µW/cm(2) (skin flap thickness 2.8-3.84 mm). Successful batteryless VVI pacing using a subcutaneously implanted solar module was performed. CONCLUSION Based on our results, we estimate that a few minutes of direct sunlight (irradiating an implanted solar module) allow powering a pacemaker for 24 h using a suitable energy storage. Thus, powering a pacemaker by sunlight is feasible and may be an alternative energy supply for tomorrow's pacemakers.

Sind die empirischen Ergebnisse zum Umweltverhalten Artefakte? Ein Beitrag zum Problem der Messung von Umweltverhalten

In Untersuchungen zum Umweltbewusstsein und Umweltverhalten werden die zentralen Variablen in der Regel auf der Basis von Selbstauskünften und mittels Itembatterien erhoben. Fraglich ist dabei, ob die Items zur Messung ökologischen Handelns mehr als nur \"symbolisches Verhalten\" erfassen. Bodenstein, Spiller und Elbers (1997) haben kürzlich einen Index vorgeschlagen, der sich am tatsächlichen Energie- und Materialverbrauch eines Haushalts orientiert. Wir vergleichen dieses Konzept mit anderen Skalen und untersuchen empirisch anhand der Daten des Surveys \"Umweltbewusstsein in Deutschland 1998\", in welchem Ausmaß die Ergebnisse von Regressionsmodellen des Umwelthandelns von den jeweils zugrunde gelegten Skalen abhängen. Es zeigt sich, dass gerade bezüglich der zentralen Determinanten \"Umweltbewusstsein\" und \"Einkommen\" beträchtliche Unterschiede bestehen.

The first batteryless, solar-powered cardiac pacemaker

BACKGROUND: Contemporary pacemakers (PMs) are powered by primary batteries with a limited energy-storing capacity. PM replacements because of battery depletion are common and unpleasant and bear the risk of complications. Batteryless PMs that harvest energy inside the body may overcome these limitations. OBJECTIVE: The goal of this study was to develop a batteryless PM powered by a solar module that converts transcutaneous light into electrical energy. METHODS: Ex vivo measurements were performed with solar modules placed under pig skin flaps exposed to different irradiation scenarios (direct sunlight, shade outdoors, and indoors). Subsequently, 2 sunlight-powered PMs featuring a 4.6-cm2 solar module were implanted in vivo in a pig. One prototype, equipped with an energy buffer, was run in darkness for several weeks to simulate a worst-case scenario. RESULTS: Ex vivo, median output power of the solar module was 1963 μW/cm2 (interquartile range [IQR] 1940-2107 μW/cm2) under direct sunlight exposure outdoors, 206 μW/cm2 (IQR 194-233 μW/cm2) in shade outdoors, and 4 μW/cm2 (IQR 3.6-4.3 μW/cm2) indoors (current PMs use approximately 10-20 μW). Median skin flap thickness was 4.8 mm. In vivo, prolonged SOO pacing was performed even with short irradiation periods. Our PM was able to pace continuously at a rate of 125 bpm (3.7 V at 0.6 ms) for 1½ months in darkness. CONCLUSION: Tomorrow's PMs might be batteryless and powered by sunlight. Because of the good skin penetrance of infrared light, a significant amount of energy can be harvested by a subcutaneous solar module even indoors. The use of an energy buffer allows periods of darkness to be overcome.

Capability of E-Bike Tourism in Switzerland

AIM OF PAPER AND RESEARCH QUESTIONS The primary aim of this investigation was to examine, if tourism in Switzerland can be stimulated by focusing on e-bike offers. Switzerland is an attractive and manifold country for bike tourism. However, there are plenty of hilly and steep areas, where the topography is quite demanding and cycling is predestined to ambitious sportsperson. Less performance-oriented bike tourists are possibly discouraged by the challenges of the landscape. E-bikes seem to be a reasonable alterna-tive to enable less trained person to attend bike tours in steeper regions as well as to keep heterogeneous groups together. E-bikes are already popular in Switzerland for daily routes as the journey to work, but they are not very common in the tour-istic context. The presented investigation evaluates the current standing of supply and demand for e-bike tourism and asks for opportunities and threats in the future development. LITERTURE REVIEW The existing frameworks to analyse capability in the field of sport tourism are limited, because of the broad variation of sports and tourism types. Still several conceptions are valuable to evaluate the opportunities of e-bike tourism in Switzer-land. According to Higham and Hinch (2009) the potential of touristic products and destinations always depends on the interaction among the factors place, people and activity. Standeven and de Knop (1999) support this position by identify-ing the experience of place as a key component of the sport tourism experience. Bull (2005) assumes that place not only affects experience. In his opinion, the specific spatially located resources are even crucial for the existence of nature sports. He identifies four factors determining the attraction of touristic products or destination, as physical characteristics, accessibility and infrastructural arrangements, political and economic resources as well as cultural and perceptual aspects. Concerning the demand side (people) the contemporary research is guided by an individual psychological focus delivering mainly results about motives and the decision making process (e.g. Görtz & Hürten, 2011). RESEARCH DESIGN AND DATA ANALYSIS The presented study is based on a between method triangulation, consisting of qualitative interviews with important stake-holders on the supply side and a cross sectional survey on the demand side. Qualitative interviews were conducted with the first provider of touristic e-bike routes and with the manager of the leading e-bike rental company in Switzerland. The interviews were evaluated by qualitative content analysis according to Mayring (2008). The survey covered a randomized sample of 748 adult persons and focused on interests and needs of potential consumers. The concluding potentials analy-sis combined the results of the interviews and the survey with the findings of literature research. As central outcome the strengths, weaknesses, opportunities and threats were evaluated and presented by SWOT-analysis. RESULTS Results showed that the development of e-bike tourism in Switzerland was not initiated by tourism promoter, but by an innovative e-bike producer. However, also for the manufacturer the fit between landscape (place), product (activity) and visitors (people) was the crucial criterion. The first e-bike tours were offered in a demanding and rural region, in order that the experience of place was able to promote a positive overall experience. Due to the success of the first touristic e-bike products, several tourism regions started to extend their portfolio with e-bike offers. To date a nationwide network for signalised e-bike tours, rental stations and changing stations for rechargeable batteries is established. Despite the attractive offer, the demand is only moderate. The obtained results of the consumer survey pointed at a certain barrier to use e-bikes for tourism activities. The most substantial barrier is the missing affinity for bike tourism in general. Another notable group considering themselves as “fit enough for normal bike tourism”. Nevertheless 55% of the respondent are interested in tour-istic e-bike products. Looking only at people with e-bike tourism experience, even 92% are interested in further activities. DISCUSSION AN CONCLUSION The current study findings are encouraging because they suggest a superior suitability and an attractive level of e-bike tourism products in Switzerland. The results of the consumer survey indicate an increasing demand for e-bike tourism. The investigation also points at some risks, as the rivalry for bike tourism or the raised safety hazard because of the increased driving speed. Summing up, the results support the conclusion, that e-bike tourism will become more important in the com-ing years. However, to reach the goal relevant trends as the requirement for customised offers must be considered and marketing activities are supposed to be extended. REFERENCES Bull, C. (2005). Sport tourism resource analysis. In J. Higham (Ed.), Sport tourism destination: Issues, opportunities and analysis (pp. 25-38). Amsterdam: Elsevier Butterworth-Heinemann. Görtz, M., & D. Hürten (2011). Motive der Radurlauber, psychografische Merkmale und Reiseverhalten. In A. Dreyer, E. Miglbauer & R. Mühlnickel (Hrsg.), Radtourismus. Entwicklungen, Potenziale, Perspektiven (S. 36-43). München: Olden-bourg. Higham, J., & Hinch, T. (2009). Sport and Tourism. Globalization, Mobility and Identity. Amsterdam: Butterworth-Heinemann. Mayring, P. (2008). Qualitative Inhaltsanalyse. Grundlagen und Techniken (10. Aufl.). Weinheim: Beltz Verlag. Standeven, J., & De Knop, P. (1999). Sport Tourism. Campaign: Human Kinetics.