The brain’s default state interacts with working memory processes in a complex and load-dependent manner

Recently, many studies about a network active during rest and deactivated during tasks emerged in the literature: the default mode network (DMN). Spatial and temporal DMN features are important markers for psychiatric diseases. Another prominent indicator of cognitive functioning, yielding information about the mental condition in health and disease, is working memory (WM) processing. In EEG studies, frontal-midline theta power has been shown to increase with load during WM retention in healthy subjects. From these findings, the conclusion can be drawn that an increase in resting state DMN activity may go along with an increase in theta power in high-load WM conditions. We followed this hypothesis in a study on 17 healthy subjects performing a visual Sternberg WM task. The DMN was obtained by a BOLD-ICA approach and its dynamics represented by the percent-strength during pre-stimulus periods. DMN dynamics were temporally correlated with EEG theta spectral power from retention intervals. This so-called covariance mapping yielded the spatial distribution of the theta EEG fluctuations associated with the dynamics of the DMN. In line with previous findings, theta power was increased at frontal-midline electrodes in high- versus low-load conditions during early WM retention. However, load-dependent correlations of DMN with theta power resulted in primarily positive correlations in low-load conditions, while during high-load conditions negative correlations of DMN activity and theta power were observed at frontal-midline electrodes. This DMN-dependent load effect reached significance during later retention. Our results show a complex and load-dependent interaction of pre-stimulus DMN activity and theta power during retention, varying over the course of the retention period. Since both, WM performance and DMN activity, are markers of mental health, our results could be important for further investigations of psychiatric populations.

The brain’s pre-stimulus default state interacts with working memory in a load-dependent manner

Recently, multiple studies showed that spatial and temporal features of a task-negative default mode network (DMN) (Greicius et al., 2003) are important markers for psychiatric diseases (Balsters et al., 2013). Another prominent indicator of cognitive functioning, yielding information about the mental condition in health and disease, is working memory (WM) processing. In EEG and MEG studies, frontal-midline theta power has been shown to increase with load during WM retention in healthy subjects (Brookes et al., 2011). Negative correlations between DMN activity and theta amplitude have been found during resting state (Jann et al., 2010) as well as during WM (Michels et al., 2010). Likewise, WM training resulted in higher resting state theta power as well as increased small-worldness of the resting brain (Langer et al., 2013). Further, increased fMRI connectivity between nodes of the DMN correlated with better WM performance (Hampson et al., 2006). Hence, the brain’s default state might influence it’s functioning during task. We therefore hypothesized correlations between pre-stimulus DMN activity and EEG-theta power during WM maintenance, depending on the WM load. 17 healthy subjects performed a Sternberg WM task while being measured simultaneously with EEG and fMRI. Data was recorded within a multicenter-study: 12 subjects were measured in Zurich with a 64-channels MR-compatible system (Brain Products) in a 3T Philips scanner, 5 subjects with a 96-channel MR-compatible system (Brain Products) in a 3T Siemens Scanner in Bern. The DMN components was obtained by a group BOLD-ICA approach over the full task duration (figure 1). The subject-wise dynamics were obtained by back-reconstructed onto each subject’s fMRI data and normalized to percent signal change values. The single trial pre-stimulus-DMN activation was then temporally correlated with the single trial EEG-theta (3-8 Hz) spectral power during retention intervals. This so-called covariance mapping (Jann et al., 2010) yielded the spatial distribution of the theta EEG fluctuations during retention associated with the dynamics of the pre-stimulus DMN. In line with previous findings, theta power was increased at frontal-midline electrodes in high- versus low-load conditions during early WM retention (figure 2). However, correlations of DMN with theta power resulted in primarily positive correlations in low-load conditions, while during high-load conditions negative correlations of DMN activity and theta power were observed at frontal-midline electrodes. This DMN-dependent load effect reached significance in the middle of the retention period (TANOVA, p<0.05) (figure 3). Our results show a complex and load-dependent interaction of pre-stimulus DMN activity and theta power during retention, varying over time. While at a more global, load-independent view pre-stimulus DMN activity correlated positively with theta power during retention, the correlation was inversed during certain time windows in high-load trials, meaning that in trials with enhanced pre-stimulus DMN activity theta power decreases during retention. Since both WM performance and DMN activity are markers of mental health our results could be important for further investigations of psychiatric populations.

Viral load versus CD4⁺ monitoring and 5-year outcomes of antiretroviral therapy in HIV-positive children in Southern Africa: a cohort-based modelling study.

OBJECTIVES Many paediatric antiretroviral therapy (ART) programmes in Southern Africa rely on CD4⁺ to monitor ART. We assessed the benefit of replacing CD4⁺ by viral load monitoring. DESIGN A mathematical modelling study. METHODS A simulation model of HIV progression over 5 years in children on ART, parameterized by data from seven South African cohorts. We simulated treatment programmes with 6-monthly CD4⁺ or 6- or 12-monthly viral load monitoring. We compared mortality, second-line ART use, immunological failure and time spent on failing ART. In further analyses, we varied the rate of virological failure, and assumed that the rate is higher with CD4⁺ than with viral load monitoring. RESULTS About 7% of children were predicted to die within 5 years, independent of the monitoring strategy. Compared with CD4⁺ monitoring, 12-monthly viral load monitoring reduced the 5-year risk of immunological failure from 1.6 to 1.0% and the mean time spent on failing ART from 6.6 to 3.6 months; 1% of children with CD4⁺ compared with 12% with viral load monitoring switched to second-line ART. Differences became larger when assuming higher rates of virological failure. When assuming higher virological failure rates with CD4⁺ than with viral load monitoring, up to 4.2% of children with CD4⁺ compared with 1.5% with viral load monitoring experienced immunological failure; the mean time spent on failing ART was 27.3 months with CD4⁺ monitoring and 6.0 months with viral load monitoring. Conclusion: Viral load monitoring did not affect 5-year mortality, but reduced time on failing ART, improved immunological response and increased switching to second-line ART.

Milk production during the colostral period is not related to the later lactational performance in dairy cows

In dairy cows, milk yield increases rapidly after parturition until a peak at around wk 6 of lactation. However, the description of the shape of the lactation curve is commonly based on weekly average milk yields. For a more detailed analysis of the milk production curve from the very beginning of lactation including the colostral period and the effect of colostrum yield on further lactational performance, the first 10 milkings after parturition, daily milk yields from d 1 to 28 of lactation, and the cumulative milk production on d 100 to 305 of lactation were investigated in 17 primiparous and 39 multiparous cows milked twice daily. Milk yield at the first milking after parturition (colostrum) ranged from 1.3 to 20.7kg (Δ=19.4kg) in multiparous and from 1.8 to 10.9kg in primiparous animals (Δ=9.1kg). At the tenth milking, milk production ranged from 9.2 to 21.5kg (Δ=12.3kg) in multiparous and from 7.0 to 15.2kg (Δ=8.2kg) in primiparous animals. Immediately after parturition, daily milk production increased rapidly, but after approximately 1wk in lactation, the slope of the daily milk production curve flattened and continued more linear. A nonlinear regression equation was used to determine this timely change, which occurred earlier in primiparous (d 6.9±0.3) than in multiparous cows (d 8.2±0.2). The correlation between the amount of first colostrum and milk production during further lactation decreased already from 0.47 on d 5 to 0.32 on d 14. In multiparous cows, the correlation between total milk production of the previous 305d standard lactation and the amount of first colostrum was not significant (correlation=0.29), whereas the correlation with the daily production increased from 0.45 on d 5 to 0.69 on d 14. However, in primiparous animals, correlations between first-colostrum yield and daily milk yields up to d 28 of lactation were not significant, possibly due to the smaller sample size compared with multiparous animals. First-colostrum yield and cumulative milk production of 100, 200, and 305 lactation days were not significantly correlated in multiparous and primiparous cows. In conclusion, the milk production during the first few milkings is widely independent from the overall production level of a cow. Potentially, genetic selection toward lower milk yield during the very first days after parturition at a simultaneously high lactational performance may be a tool to ensure sufficient colostrum quality and to reduce the metabolic load around parturition.

The Self-Expanding Symetis Acurate Does Not Increase Cerebral Microembolic Load When Compared to the Balloon-Expandable Edwards Sapien Prosthesis: A Transcranial Doppler Study in Patients Undergoing Transapical Aortic Valve Implantation

Objectives The aim of this study was to quantify potential differences in count, frequency and pattern of high-intensity transient signals (HITS) during transapical transcatheter aortic valve implantation (TA-TAVI), by comparing the Symetis Acurate TA (SA) with the balloon-expandable Edwards Sapien XT (ES) system. Background Recently, the Symetis Acurate TA revalving system has been introduced for TA-TAVI. The Symetis Acurate TA aortic bioprosthesis is self-expanding and is deployed by a specific two-step implantation technique. Whether this novel method increases the load of intraprocedural emboli, detected by transcranial Doppler ultrasound (TCD) as HITS, or not is not clear. Methods Twenty-two patients (n = 11 in each study arm, median logistic EuroScore 20%, median STS score 7%) displayed continuous TCD signals of good quality throughout the entire TA-TAVI procedure and were included in the final analysis. Data are presented as median with interquartile ranges. Results No significant differences were detected in total procedural or interval-related HITS load (SA: 303 [200; 594], ES: 499 [285; 941]; p = 0.16). With both devices, HITS peaked during prosthesis deployment (PD), whereas significantly fewer HITS occurred during instrumentation (SA: p = 0.002; ES: <0.001) or post-implantation PI (SA: p = 0.007; ES: <0.001). PD-associated HITS amounted to almost half of the total HITS load. One patient suffered new disabling stroke at 30 days. Thirty-day mortality amounted to 13.6% (3 of 22 patients). Conclusions Simplified transapical delivery using the self-expanding SA device does not increase HITS, despite of a two-step deployment technique with more interactions with the native aortic valve, when compared to the balloon-expandable ES valve. The similarity in HITS count, frequency and pattern with the two systems suggests a common mechanism for the release of cerebral microemboli.

Load Balancing in LTE Mobile Networks with Information-Centric Networking

Mobile networks usage rapidly increased over the years, with great consequences in terms of performance requirements. In this paper, we propose mechanisms to use Information-Centric Networking to perform load balancing in mobile networks, providing content delivery over multiple radio technologies at the same time and thus efficiently using resources and improving the overall performance of content transfer. Meaningful results were obtained by comparing content transfer over single radio links with typical strategies to content transfer over multiple radio links with Information-Centric Networking load balancing. Results demonstrate that Information-Centric Networking load balancing increases the performance and efficiency of 3GPP Long Term Evolution mobile networks while greatly improving the network perceived quality for end users.

Measurement and stability of the pointing of the BepiColombo Laser Altimeter under thermal load

The BepiColombo Laser Altimeter (BELA) has been selected to fly on ESA׳s BepiColombo mission to Mercury. The instrument will be the first European laser altimeter designed for interplanetary flight. This paper describes the setup used to characterize the angular movements of BELA under the simulated environmental conditions that the instrument will encounter when orbiting Mercury. The system comprises a laser transmitter and a receiving telescope, which can move with respect to each other under thermal load. Tests performed using the Engineering Qualification Model show that the setup is accurate enough to characterize angular movements of the instrument components to an accuracy of ≈10 μrad. The qualification instrument is thermally stable to operate during all mission phases around Mercury proving that the transmitter and receiver sections will remain within the alignment requirements during its mission.

Loads and loads and loads: the influence of prospective load, retrospective load, and ongoing task load in prospective memory

In prospective memory tasks different kinds of load can occur. Adding a prospective memory task can impose a load on ongoing task performance. Adding ongoing task load (OTL) can affect prospective memory performance. The existence of multiple target events increases prospective load (PL) and adding complexity to the to-be-remembered action increases retrospective load (RL). In two experiments, we systematically examined the effects of these different types of load on prospective memory performance. Results showed an effect of PL on costs in the ongoing task for categorical targets (Experiment 2), but not for specific targets (Experiment 1). RL and OTL both affected remembering the retrospective component of the prospective memory task. We suggest that PL can enhance costs in the ongoing task due to additional monitoring requirements. RL and OTL seem to impact the division of resources between the ongoing task and retrieval of the retrospective component, which may affect disengagement from the ongoing task. In general, the results demonstrate that the different types of load affect prospective memory differentially.

Hepatitis B viral load in dried blood spots: A validation study in Zambia

Background: Access to hepatitis B viral load (VL) testing is poor in sub-Saharan Africa (SSA) due toeconomic and logistical reasons.Objectives: To demonstrate the feasibility of testing dried blood spots (DBS) for hepatitis B virus (HBV)VL in a laboratory in Lusaka, Zambia, and to compare HBV VLs between DBS and plasma samples.Study design: Paired plasma and DBS samples from HIV-HBV co-infected Zambian adults were analyzedfor HBV VL using the COBAS AmpliPrep/COBAS TaqMan HBV test (Version 2.0) and for HBV genotypeby direct sequencing. We used Bland-Altman analysis to compare VLs between sample types and bygenotype. Logistic regression analysis was conducted to assess the probability of an undetectable DBSresult by plasma VL.Results: Among 68 participants, median age was 34 years, 61.8% were men, and median plasma HBV VLwas 3.98 log IU/ml (interquartile range, 2.04–5.95). Among sequenced viruses, 28 were genotype A1 and27 were genotype E. Bland–Altman plots suggested strong agreement between DBS and plasma VLs. DBSVLs were on average 1.59 log IU/ml lower than plasma with 95% limits of agreement of −2.40 to −0.83 logIU/ml. At a plasma VL ≥2,000 IU/ml, the probability of an undetectable DBS result was 1.8% (95% CI:0.5–6.6). At plasma VL ≥20,000 IU/ml this probability reduced to 0.2% (95% CI: 0.03–1.7).

HIV-1 Transmission During Recent Infection and During Treatment Interruptions as Major Drivers of New Infections in the Swiss HIV Cohort Study.

BACKGROUND  Reducing the fraction of transmissions during recent human immunodeficiency virus (HIV) infection is essential for the population-level success of "treatment as prevention". METHODS  A phylogenetic tree was constructed with 19 604 Swiss sequences and 90 994 non-Swiss background sequences. Swiss transmission pairs were identified using 104 combinations of genetic distance (1%-2.5%) and bootstrap (50%-100%) thresholds, to examine the effect of those criteria. Monophyletic pairs were classified as recent or chronic transmission based on the time interval between estimated seroconversion dates. Logistic regression with adjustment for clinical and demographic characteristics was used to identify risk factors associated with transmission during recent or chronic infection. FINDINGS  Seroconversion dates were estimated for 4079 patients on the phylogeny, and comprised between 71 (distance, 1%; bootstrap, 100%) to 378 transmission pairs (distance, 2.5%; bootstrap, 50%). We found that 43.7% (range, 41%-56%) of the transmissions occurred during the first year of infection. Stricter phylogenetic definition of transmission pairs was associated with higher recent-phase transmission fraction. Chronic-phase viral load area under the curve (adjusted odds ratio, 3; 95% confidence interval, 1.64-5.48) and time to antiretroviral therapy (ART) start (adjusted odds ratio 1.4/y; 1.11-1.77) were associated with chronic-phase transmission as opposed to recent transmission. Importantly, at least 14% of the chronic-phase transmission events occurred after the transmitter had interrupted ART. CONCLUSIONS  We demonstrate a high fraction of transmission during recent HIV infection but also chronic transmissions after interruption of ART in Switzerland. Both represent key issues for treatment as prevention and underline the importance of early diagnosis and of early and continuous treatment.

The J-curve in HIV: low and moderate alcohol intake predicts mortality but not the occurrence of major cardiovascular events.

OBJECTIVES In HIV-negative populations light to moderate alcohol consumption is associated with a lower cardiovascular morbidity and mortality than alcohol abstention. Whether the same holds true for HIV-infected individuals has not been evaluated in detail. DESIGN Cohort study METHODS:: Adults on antiretroviral therapy in the Swiss HIV Cohort Study with follow-up after August 2005 were included. We categorized alcohol consumption into: abstention, low (1-9 g/d), moderate (10-29 g/d in females and 10-39g/d in men) and high alcohol intake. Cox proportional hazards models were used to describe the association between alcohol consumption and cardiovascular disease free survival (combined endpoint) as well as cardiovascular disease events (CADE) and overall survival. Baseline and time-updated risk factors for CADE were included in the models. RESULTS Among 9,741 individuals included, there were 788 events of major CADE or death during 46,719 years of follow-up, corresponding to an incidence of 1.69 events/100 person-years. Follow-up according to alcohol consumption level was 51% abstention, 20% low, 23% moderate and 6% high intake. As compared to abstention, low (hazard ratio 0.79, 95% confidence interval 0.63-0.98) and moderate alcohol intake (0.78, 0.64-0.95) were associated with a lower incidence of the combined endpoint. There was no significant association between alcohol consumption and CADE. CONCLUSIONS Compared to abstention, low and moderate alcohol intake were associated with a better CADE-free survival. However, this result was mainly driven by mortality and the specific impact of drinking patterns and type of alcoholic beverage on this outcome remains to be determined.

Optical Light Curve Observations to Determine Attitude States of Space Debris

The currently proposed space debris remediation measures include the active removal of large objects and “just in time” collision avoidance by deviating the objects using, e.g., ground-based lasers. Both techniques require precise knowledge of the attitude state and state changes of the target objects. In the former case, to devise methods to grapple the target by a tug spacecraft, in the latter, to precisely propagate the orbits of potential collision partners as disturbing forces like air drag and solar radiation pressure depend on the attitude of the objects. Non-resolving optical observations of the magnitude variations, so-called light curves, are a promising technique to determine rotation or tumbling rates and the orientations of the actual rotation axis of objects, as well as their temporal changes. The 1-meter telescope ZIMLAT of the Astronomical Institute of the University of Bern has been used to collect light curves of MEO and GEO objects for a considerable period of time. Recently, light curves of Low Earth Orbit (LEO) targets were acquired as well. We present different observation methods, including active tracking using a CCD subframe readout technique, and the use of a high-speed scientific CMOS camera. Technical challenges when tracking objects with poor orbit redictions, as well as different data reduction methods are addressed. Results from a survey of abandoned rocket upper stages in LEO, examples of abandoned payloads and observations of high area-to-mass ratio debris will be resented. Eventually, first results of the analysis of these light curves are provided.