Erosion in relation to nutrition and the environment.

When considering the erosive potential of a food or drink, a number of factors must be taken into account. pH is arguably the single most important parameter in determining the rate of erosive tissue dissolution. There is no clear-cut critical pH for erosion as there is for caries. At low pH, it is possible that other factors are sufficiently protective to prevent erosion, but equally erosion can progress in acid of a relatively high pH in the absence of mitigating factors. Calcium and phosphate concentration, in combination with pH, determine the degree of saturation with respect to tooth minerals. Solutions supersaturated with respect to enamel or dentine will not cause them to dissolve, meaning that given sufficient common ion concentrations erosion will not proceed, even if the pH is low. Interestingly, the addition of calcium is more effective than phosphate at reducing erosion in acid solutions. Today, several calcium-enriched soft drinks are on the market, and acidic products with high concentrations of calcium and phosphorus are available (such as yoghurt), which do not soften the dental hard tissues. The greater the buffering capacity of the drink or food, the longer it will take for the saliva to neutralize the acid. A higher buffer capacity of a drink or foodstuff will enhance the processes of dissolution because more release of ions from the tooth mineral is required to render the acid inactive for further demineralization. Temperature is also a significant physical factor; for a given acidic solution, erosion proceeds more rapidly the higher the temperature of that solution. In recent years, a number of interesting potentially erosion-reducing drink and food additives have been investigated.

Assessing Calling in Chinese College Students: Development of a Measure and Its Relation to Hope

Research suggests that perceiving a calling towards a particular career is relatively frequent among college students in Western cultures. However, little is known about how this applies to other cultural contexts. This study assessed the perception of career as a calling in the Chinese culture. Study 1 reports the development of the Chinese Calling Scale (CCS), based on a sample of 788 Chinese college students, and identifies three dimensions of a calling: Altruism, Guiding Force, and Meaning and Purpose. Measurement invariance across gender is supported by the CCS. In Study 2, the convergent and criterion validity of the CSS is examined based on a sample of 387 college students. The CCS is strongly related to an existing calling measure and moderately related to life meaning and life satisfaction. Study 3 examines the relation between calling, hope, life meaning, life satisfaction, and career decidedness among 518 college students. The findings reveal that hope significantly mediated the relation of calling with career decidedness, life meaning, and life satisfaction. In summary, this study provides a new scale to assess calling in Chinese culture and is the first to explore how calling relates to dispositional hope.

Can you see me thinking (about my answers)? Using eye-tracking to illuminate developmental differences in monitoring and control skills and their relation to performance

This study focuses on relations between 7- and 9-year-old children’s and adults’ metacognitive monitoring and control processes. In addition to explicit confidence judgments (CJ), data for participants’ control behavior during learning and recall as well as implicit CJs were collected with an eye-tracking device (Tobii 1750). Results revealed developmental progression in both accuracy of implicit and explicit monitoring across age groups. In addition, efficiency of learning and recall strategies increases with age, as older participants allocate more fixation time to critical information and less time to peripheral or potentially interfering information. Correlational analyses, recall performance, metacognitive monitoring, and controlling indicate significant interrelations between all of these measures, with varying patterns of correlations within age groups. Results are discussed in regard to the intricate relationship between monitoring and recall and their relation to performance.

Inheritance of porcine receptors for enterotoxigenic Escherichia coli with fimbriae F4ad and their relation to other F4 receptors.

Enteric Escherichia coli infections are a highly relevant cause of disease and death in young pigs. Breeding genetically resistant pigs is an economical and sustainable method of prevention. Resistant pigs are protected against colonization of the intestine through the absence of receptors for the bacterial fimbriae, which mediate adhesion to the intestinal surface. The present work aimed at elucidation of the mode of inheritance of the F4ad receptor which according to former investigations appeared quite confusing. Intestines of 489 pigs of an experimental herd were examined by a microscopic adhesion test modified in such a manner that four small intestinal sites instead of one were tested for adhesion of the fimbrial variant F4ad. Segregation analysis revealed that the mixed inheritance model explained our data best. The heritability of the F4ad phenotype was estimated to be 0.7±0.1. There are no relations to the strong receptors for variants F4ab and F4ac. Targeted matings allowed the discrimination between two F4ad receptors, that is, a fully adhesive receptor (F4adRFA) expressed on all enterocytes and at all small intestinal sites, and a partially adhesive receptor (F4adRPA) variably expressed at different sites and often leading to partial bacterial adhesion. In pigs with both F4ad receptors, the F4adRPA receptor is masked by the F4adRFA. The hypothesis that F4adRFA must be encoded by at least two complementary or epistatic dominant genes is supported by the Hardy-Weinberg equilibrium statistics. The F4adRPA receptor is inherited as a monogenetic dominant trait. A comparable partially adhesive receptor for variant F4ab (F4abRPA) was also observed but the limited data did not allow a prediction of the mode of inheritance. Pigs were therefore classified into one of eight receptor phenotypes: A1 (F4abRFA/F4acR+/F4adRFA); A2 (F4abRFA/F4acR+/F4adRPA); B (F4abRFA/F4acR+/F4adR-); C1 (F4abRPA/F4acR-/F4adRFA); C2 (F4abRPA/F4acR-/F4adRPA); D1 (F4abR-/F4acR-/F4adRFA); D2 (F4abR-/F4acR-/F4adRPA); E (F4abR-/F4acR-/F4adR-).

Early adolescents’ enjoyment experienced in learning situations at school and its relation to student achievement

While many studies confirm that positive emotions, including enjoyment, lead to better student achievement, less empirical evidence exists about possible mediator variables that link achievement to enjoyment. It is proposed that achievement and enjoyment form a circular dependency; enjoyment in learning leads to higher achievement but a degree of achievement is required to enjoy learning. This study provides insight into the reverse of the much studied enjoyment to achievement link and provides practical recommendations on how to use these findings. Founded in Control-value theory, which suggests that control and value cognitions are important variables that mediate the connection between enjoyment and achievement, this study explores the reciprocal achievement-cognition-enjoyment link. The reciprocal link was investigated by applying a one year longitudinal design to students of grade 6 and 7 (N = 356). This age group was chosen because early adolescence represents a critical period during which a strong decrease in positive learning emotions is observed. Part of the work involved identifying factors that might be responsible for this negative development. Results of cross-lagged path analysis identified reciprocal effects between student achievement and enjoyment with control and value cognitions functioning as partial mediators. High achievement goes with high control and value cognitions, which in turn positively affect enjoyment. However, cross-lagged correlations could only be partly confirmed. The results are discussed in terms of theoretical and practical implications

Decision-Making Processes in Voluntary Football Clubs in Relation to External Counselling

Introduction Recruiting and retaining volunteers who are prepared to make a long-term commitment is a major problem for Swiss sports clubs. With the inclusion of external counselling for the change and systematisation of volunteer management, sports clubs have a possibility to develop and defuse problems in spite of existing barriers and gaps in knowledge. To what extent is external counselling for personnel problems effective? It is often observed that standardised counselling inputs lead to varying consequences for sports clubs. It can be assumed that external impulses are interpreted and transformed differently into the workings of the club. However, this cannot be solely attributed to the situational or structural conditions of the clubs. It is also important to consider the underlying decision-making processes of a club. According to Luhmann’s organisational sociological considerations (2000), organisations (sports clubs) have to be viewed as social systems consisting of (communicated) decisions. This means that organisations are continually reproduced by decision-making processes. All other (observable) factors such as an organisation’s goals, recruiting strategies, support schemes for volunteers etc., have to be seen as an outcome of the operation of prior organisational decisions. Therefore: How do decision-making processes in sports clubs work in the context of the implementation of external counselling? Theoretical Framework An examination of the actual situation in sports clubs shows that decisions frequently appear to be shaped by inconsistency, unexpected outcomes, and randomness (Amis & Slack, 2003). Therefore, it must be emphasised that these decisions cannot be analysed according to any rational decision-making model. Their specific structural characteristics only permit a limited degree of rationality – bounded rationality. Non-profit organisations in particular are shaped by a specific mode of decisionmaking that Cohen, March, and Olsen (1972) have called the “garbage can model”. As sport clubs can also be conceived as “organised anarchies”, this model seems to offer an appropriate approach to understanding their practices and analysing their decision-making processes. The key concept in the garbage can model is the assumption that decision-making processes in organisations consist of four “streams”: (a) problems, (b) actors, (c) decision-making opportunities, and (d) solutions. Method Before presenting the method of the analysis of the decision-making processes in sports clubs, the external counselling will be described. The basis of the counselling is generated by a sports clubs’ capability to change. Due to the specific structural characteristics and organisational principles, change processes in sports clubs often merge with barriers and restrictions. These need to be considered when developing counselling guidelines for a successful planning and realisation of change processes. Furthermore, important aspects of personnel management in sports clubs and especially volunteer management must be implied in order to elaborate key elements for the counselling to recruit new volunteers (e.g., approach, expectations). A counselling of four system-counselling workshops was conceptualised by considering these specific characteristics. The decision-making processes in the sports clubs were analysed during the counselling and the implementation process. A case study is designed with the appropriate methodological approach for such explorative research. The approach adopted for these single case analyses was oriented toward the research program of behavioural decision-making theory (garbage can model). This posits that in-depth insights into organisational decision-making processes can only be gained through relevant case studies of existing organisational situations (Skille, 2013). Before, during and after the intervention, questionnaires and guided interviews were conducted with the project teams of the twelve par-ticipating football clubs to assess the different components of the “streams” in the context of external counselling. These interviews have been analysed using content analysis following guidelines as for-mulated by Mayring (2010). Results The findings show that decision-making processes in football clubs occur differently in the context of external counselling. Different initial positions and problems are the triggers for these decision-making processes. Furthermore, the implementation of the solutions and the external counselling is highly dependent on the commitment of certain people as central players within the decision-mak-ing process. The importance of these relationships is confirmed by previous findings in regard to decision-making and change processes in sports clubs. The decision-making processes in sports clubs can be theoretically analysed using behavioural decision-making theory and the “garbage can model”. Bounded rationality characterises all “streams” of the decision-making processes. Moreo-ver, the decision-making process of the football clubs can be well illustrated in the framework, and the interplay of the different dimensions illustrates the different decision-making practices within the football clubs. References Amis, J., & Slack, T. (2003). Analysing sports organisations: Theory and practice. In B. Houlihan (Eds.), Sport & Society (pp. 201–217). London, England: Sage. Cohen, M.D., March, J.G., & Olsen, J.P. (1972). A garbage can model of organisational choice. Ad-ministrative Science Quarterly, 17, 1-25. Luhmann, N. (2000). Organisation und Entscheidung. Opladen: Westdeutscher Verlag. Mayring, P. (2010). Qualitative Inhaltsanalyse. Grundlagen und Techniken. Weinheim: Beltz. Skille, E. Å. (2013). Case study research in sport management: A reflection upon the theory of science and an empirical example. In S. Söderman & H. Dolles (Eds.), Handbook of research on sport and business (pp. 161–175). Cheltenham, England: Edward Elgar.

Quantitative analysis of imprint shape and its relation to mechanical properties measured by microindentation in bone

Microindentation in bone is a micromechanical testing technique routinely used to extract material properties related to bone quality. As the analysis of microindentation data is based on assumptions about the contact between sample and surface, the aim of this study was to quantify the topological variability of indentations in bone and examine its relationship with mechanical properties. Indentations were performed in dry human and ovine bone in axial and transverse directions and their topology was measured by atomic force microscopy. Statistical shape modeling of the residual imprint allowed to define a mean shape and to describe the variability in terms of 21 principal components related to imprint depth, surface curvature and roughness. The indentation profile of bone was found to be highly consistent and free of any pile up while differing mostly by depth between species and direction. A few of the topological parameters, in particular depth, showed significant but rather weak and inconsistent correlations to variations in mechanical properties. The mechanical response of bone as well as the residual imprint shape was highly consistent within each category. We could thus verify that bone is rather homogeneous in its micromechanical properties and that indentation results are not strongly influenced by small deviations from an ideally flat surface.

Susceptibility of enamel to initial erosion in relation to tooth type, tooth surface and enamel depth

This study aimed at assessing the susceptibility of different tooth types (molar/premolar), surfaces (buccal/lingual) and enamel depths (100, 200, 400 and 600 μm) to initial erosion measured by surface microhardness loss (ΔSMH) and calcium (Ca) release. Twenty molars and 20 premolars were divided into experimental and control groups, cut into lingual/ buccal halves, and ground/polished, removing 100 μm of enamel. The initial surface microhardness (SMH 0 ) was measured on all halves. The experimental group was subjected to 3 consecutive erosive challenges (30 ml/tooth of 1% citric acid, pH 3.6, 25 ° C, 1 min). After each challenge, ΔSMH and Ca release were measured. The same teeth were consecutively ground to 200, 400 and 600 μm depths, and the experimental group underwent 3 erosive challenges at each depth. No difference was found in SMH 0 between experimental and control groups. Multivariate nonparametric ANOVA showed no significant differences between lingual and buccal surfaces in ΔSMH (p = 0.801) or Ca release (p = 0.370). ΔSMH was significantly greater in premolars than in molars (p < 0.05), but not different with respect to enamel depth. Ca release decreased significantly with increasing depth. Regression between Ca release and ΔSMH at 100 μm depth showed lower slope and r 2 value, associated with greater Ca release values. At 200-600 μm depths, moderately large r 2 values were observed (0.651-0.830). In conclusion, different teeth and enamel depths have different susceptibility to erosion, so when Ca release is used to measure erosion, the depth of the test facet in enamel should be standardized, whereas this is less important if ΔSMH is used.

Crop Yield Responses to Temperature Fluctuations in 19th Century Finland: Provincial Variation in Relation to Climate and Tree Rings

Past agricultural responses to climate variability can helps us to better understand the current and future impacts of climate change on agricultural production. We studied rye (Secale cereale) and barley (Hordeum vulgare) yield responses to temperature fluctuations in Finland during the period 1861–1913. Our analyses demonstrate the high sensitivity of non-industrialised northern agriculture to temperature anomalies. We found evidence of a strong relationship between monthly and seasonal mean temperatures and crop yields. In particular, high spring temperatures were associated with higher yields. Additionally, we tested temperature-sensitive tree-ring series for their value in indicating previous agricultural outputs. The results imply that tree-ring proxies (in particular, maximum latewood density) can provide novel material for studies of historical periods and locations where instrumentally measured climate and harvest data are not available.

Effect of endovascular reperfusion in relation to site of arterial occlusion

OBJECTIVE To assess whether the association between reperfusion and improved clinical outcomes after stroke differs depending on the site of the arterial occlusive lesion (AOL). METHODS We pooled data from Solitaire With the Intention for Thrombectomy (SWIFT), Solitaire FR Thrombectomy for Acute Revascularisation (STAR), Diffusion and Perfusion Imaging Evaluation for Understanding Stroke Evolution Study 2 (DEFUSE 2), and Interventional Management of Stroke Trial (IMS III) to compare the strength of the associations between reperfusion and clinical outcomes in patients with internal carotid artery (ICA), proximal middle cerebral artery (MCA) (M1), and distal MCA (M2/3/4) occlusions. RESULTS Among 710 included patients, the site of the AOL was the ICA in 161, the proximal MCA in 389, and the distal MCA in 160 patients (M2 = 131, M3 = 23, and M4 = 6). Reperfusion was associated with an increase in the rate of good functional outcome (modified Rankin Scale [mRS] score 0-2) in patients with ICA (odds ratio [OR] 3.5, 95% confidence interval [CI] 1.7-7.2) and proximal MCA occlusions (OR 6.2, 95% CI 3.8-10.2), but not in patients with distal MCA occlusions (OR 1.4, 95% CI 0.8-2.6). Among patients with M2 occlusions, a subset of the distal MCA cohort, reperfusion was associated with excellent functional outcome (mRS 0-1; OR 2.2, 95% CI 1.0-4.7). CONCLUSIONS The association between endovascular reperfusion and better clinical outcomes is more profound in patients with ICA and proximal MCA occlusions compared to patients with distal MCA occlusions. Because there are limited data from randomized controlled trials on the effect of endovascular therapy in patients with distal MCA occlusions, these results underscore the need for inclusion of this subgroup in future endovascular therapy trials.

Circulating matrix metalloproteinase 9 levels in relation to sampling methods, femoral and carotid atherosclerosis.

OBJECTIVES To examine whether circulating levels of matrix metalloproteinase 9 (MMP-9) were associated with ultrasound-assessed intima-media thickness (IMT) and echolucent plaques in the carotid and femoral arteries. To examine preanalytical sources of variability in MMP-9 concentrations related to sampling procedures. SUBJECTS AND DESIGN Plasma and serum MMP-9 levels were compared with ultrasound assessed measures of femoral and carotid atherosclerosis, in a cross-sectional study of 61-year-old men (n = 473). Preanalytical sources of variability in MMP-9 levels were examined in 10 healthy subjects. Main outcome measures were circulating levels of MMP-9 in serum and plasma, IMT of the carotid and femoral arteries, and plaque status based on size and echolucency. SETTING Research unit at university hospital. RESULTS Plasma concentrations of total and active MMP-9 were associated with femoral artery IMT independently of traditional cardiovascular risk factors, and were higher in subjects with moderate to large femoral plaques. Plasma MMP-9 concentration was higher in men with echolucent femoral plaques (P = 0.006) compared with subjects without femoral plaques. No similar associations were found for carotid plaques. MMP-9 concentrations were higher in serum than in plasma, and higher when sampling was performed with Vacutainer than with syringe. MMP-9 levels in serum were more strongly associated with peripheral neutrophil count compared with MMP-9 levels in plasma. CONCLUSIONS Plasma MMP-9 levels were associated with atherosclerosis in the femoral artery, and total MMP-9 concentration was higher in men with echolucent femoral plaques. The choice of sample material and sampling method affect the measurements of circulating MMP-9 levels.