Consumer Behavior in Moral Markets. On the Relevance of Identity, Justice Beliefs, Social Norms, Status and Trust in Ethical Consumption

This article addresses ethical consumer behavior and uses the purchase of Fair Trade (FT) coffee to gain insights into determinants of ‘moral behavior’ in the marketplace. Our primary concern is to clarify which theoretical concepts and determinants are more useful than others in explaining FT consumption. We compare the explanatory power of consumer budget restrictions, consumer identity, social and personal norms, social status, justice beliefs, and trust. Our second aim is methodological; we contrast data on self-reported consumption of FT coffee with experimental data on hypothetical choices of different coffee products. To gain insights into the robustness of our measurement and findings, we test our propositions using two samples of undergraduate students from Germany and the United States. Our data show that consumer identity and personal norms are the major determinants of FT consumption in both samples, the results from survey-based data and from our experimental data are similar in this regard. Further, we demonstrate that studies based on a limited number of determinants might overestimate effects; the effect of justice beliefs for instance vanishes if other determinants are taken into account.

Correlation between broiler lameness and anatomical measurements of bone using radiographical projections with assessments of consistency across and within radiographs.

Lameness represents a major welfare and production issue in the poultry industry with a recent survey estimating 27% of birds lame and 3% unable to walk by 40 d of age. A variety of factors may induce lameness and are typically grouped into 2 broad classes on the basis of being infectious or skeletal in nature with the latter accounting for the majority of cases. The current work sought to build upon a large body of literature assessing the anatomical properties of bone in lame birds. Our specific objectives sought to identify relationships between relevant anatomical properties of the tibia and metatarsus using digital quantification from radiographs of legs and a measure of walking difficulty. Resulting output was statistically analyzed to assess 1) observer reliability for consistency in placing the leg during the radiograph procedure and quantification of the various measures within a radiograph, 2) the relationship between the various measurements of anatomical bone properties and sex, bird mass, and gait score, and 3) the relationship between each measurement and leg symmetry. Our anatomical bone measures were found to be reliable (intra-rater and test-retest reliabilities < 0.75) within radiograph for all measures and 8 of the 10 measures across radiographs. Several measures of bone properties in the tibia correlated to difficulty walking as measured by gait score (P < 0.05), indicating greater angulations with increasing lameness. Of the measures that manifested a gait score × bird mass interaction, heavier birds appeared to exhibit less angulation with increasing difficulty walking with lighter birds the opposite. These interactions suggest possibilities for influencing effects of activity or feed intake on bone mineralization with the bone angulation observed. Our efforts agree with that of others and indicate that angulation of the tibia may be related to lameness, though subsequent efforts involving comprehensive measures of bird activity, growth rates, and internal bone structure will be needed if the validity of the measures are to be accepted.

Understanding the underlying mechanisms of recent Jatropha curcas L. adoption by smallholders in Kenya: A rural livelihood assessment in Bondo, Kibwezi, and Kwale districts

Between 2004 and 2007, NGOs, community based organisations and private investors promoted jatropha in Kenya with the aim of generating additional income and producing biofuel for rural development. By 2008 it became gradually evident that jatropha plantations (both mono- and intercropping) are uneconomical and risky due to competition for land and labour with food crops. Cultivation of jatropha hedges was found to have better chances of economic success and to present only little risks for the adopting farmers. Still, after 2008 a number of farmers went on adopting jatropha in plots rather than as hedges. It is hypothesised that lack of awareness about the low economic prospects of jatropha plantations was the main reason for continued adoption, and that smallholder farmers with higher resource endowments mainly ventured into its cultivation. In this study we provide an empirical basis for understanding the role of households' capital assets in taking up new livelihood strategies by smallholder farmers in three rural districts in Kenya. For that purpose, we assess the motivation and enabling factors that led to the adoption of jatropha as a new livelihood strategy, as well as the context in which promotion and adoption took place. A household survey was conducted in 2010, using a structured questionnaire, to collect information on household characteristics and capital asset endowment. Data were analysed using descriptive statistics and non-parametric statistical tests. We established that access to additional income and own energy supply were the main motivation for adoption of jatropha, and that financial capital assets do not necessarily have a positive influence on adoption as hypothesised. Further, we found that the main challenges that adopting farmers faced were lack of access to information on good management practices and lack of a reliable market. We conclude that continued adoption of on-farm jatropha after 2008 is a result of lacking awareness about the low economic value of this production type. We recommend abandoning on-farm production of jatropha until improved seed material and locally adapted agronomic knowledge about jatropha cultivation becomes available and its production becomes economically competitive.

Heterogeneous Beliefs and the Demand for D&O Insurance by Listed Companies

This paper introduces a new rationale for the existence of “Directors’ and Officers’” (D&O) insurance. We use a model with volatile stock markets where shareholders design compensation schemes that incentivize managers to stimulate short-term increases in stock prices that do not maximize long run stock market value. We show that D&O insurance provides a convenient instrument for the initial shareholders of a company to take advantage of differences in beliefs between insiders and outsiders in capital markets. The empirical results support the idea that both the insurance coverage and the premium are higher in the presence of new shareholders and volatile markets. The results prove robust in various empirical model specifications.

Torque efficiency of different archwires in 0.018- and 0.022-inch conventional brackets.

OBJECTIVE To compare the archwires inserted during the final stages of the orthodontic treatment with the generated moments at 0.018- and 0.022-inch brackets. MATERIALS AND METHODS The same bracket type, in terms of prescription, was evaluated in both slot dimensions. The brackets were bonded on two identical maxillary acrylic resin models, and each model was mounted on the orthodontic measurement and simulation system. Ten 0.017 × 0.025-inch TMA and ten 0.017 × 0.025-inch stainless steel archwires were evaluated in the 0.018-inch brackets. In the 0.022-inch brackets, ten 0.019 × 0.025-inch TMA and ten 0.019 × 0.025-inch stainless steel archwires were measured. A 15° buccal root torque (+15°) and then a 15° palatal root torque (-15°) were gradually applied to the right central incisor bracket, and the moments were recorded at these positions. A t-test was conducted to compare the generated moments between wires within the 0.018- and 0.022-inch bracket groups separately. RESULTS The 0.017 × 0.025-inch archwire in the 0.018-inch brackets generated mean moments of 9.25 Nmm and 14.2 Nmm for the TMA and stainless steel archwires, respectively. The measured moments in the 0.022-inch brackets with the 0.019 × 0.025-inch TMA and stainless steel archwires were 6.6 Nmm and 9.3 Nmm, respectively. CONCLUSION The 0.017 × 0.025-inch stainless steel and β-Ti archwires in the 0.018-inch slot generated higher moments than the 0.019 × 0.025-inch archwires because of lower torque play. This difference is exaggerated in steel archwires, in comparison with the β-Ti, because of differences in stiffness. The differences of maximum moments between the archwires of the same cross-section but different alloys were statistically significant at both slot dimensions.

X-ray image calibration and its application to clinical orthopedics.

X-ray imaging is one of the most commonly used medical imaging modality. Albeit X-ray radiographs provide important clinical information for diagnosis, planning and post-operative follow-up, the challenging interpretation due to its 2D projection characteristics and the unknown magnification factor constrain the full benefit of X-ray imaging. In order to overcome these drawbacks, we proposed here an easy-to-use X-ray calibration object and developed an optimization method to robustly find correspondences between the 3D fiducials of the calibration object and their 2D projections. In this work we present all the details of this outlined concept. Moreover, we demonstrate the potential of using such a method to precisely extract information from calibrated X-ray radiographs for two different orthopedic applications: post-operative acetabular cup implant orientation measurement and 3D vertebral body displacement measurement during preoperative traction tests. In the first application, we have achieved a clinically acceptable accuracy of below 1° for both anteversion and inclination angles, where in the second application an average displacement of 8.06±3.71 mm was measured. The results of both applications indicate the importance of using X-ray calibration in the clinical routine.

Gentrification alpine : Lorsque le village de montagne devient un arrondissement métropolitain. Les nouveaux résidents partagés entre amour du paysage et capital symbolique

Cet article aborde la transformation de régions de montagne en lieux de résidence remplaçant des secteurs économiques plus anciens (agriculture, industrie manufacturière, tourisme) dans les montagnes européennes. Il se place dans la perspective du développement régional et de son impact sur les ressources régionales fixes, le « capital territorial ». Cette nouvelle tendance affecte les montagnes européennes de deux manières, et participe à la formation de régions métropolitaines qui combinent centres métropolitains et environnements de loisirs fondés sur les attraits du paysage pour constituer de nouvelles entités intégrées. Au cours du processus, le paysage devient un bien de consommation nouveau et rare, qui joue un rôle dans l’accumulation du capital investi. L’article établit que les concepts d’esthétique du paysage et d’agréments ne suffisent pas à expliquer cette nouvelle dynamique, car ils méconnaissent les processus spatio-économiques ainsi que le rôle de la marchandisation du paysage pour les nouveaux résidents. Ces nouveaux résidents ont un profil plus « multilocal » que migrant. La multilocalité et l’usage sélectif des produits du paysage freinent le processus d’intégration, crucial pour entretenir et développer le capital territorial. On peut poser que la présence non permanente des nouveaux résidents risque d’affaiblir et non de renforcer les structures locales existantes. Il semble donc nécessaire de déployer des efforts particuliers auprès de chaque groupe de nouveaux résidents pour que de simples résidents à temps partiel deviennent des acteurs régionaux (au moins à temps partiel). De plus, le concept du développement régional centré sur les acteurs innovants doit être remis en question dans la mesure où l’aspect « consommation » domine le rapport du paysage.