1H HR-MAS NMR Based Metabolic Profiling of Cells in Response to Treatment with a Hexacationic Ruthenium Metallaprism as Potential Anticancer Drug.

1H high resolution magic angle spinning (HR-MAS) NMR spectroscopy was applied in combination with multivariate statistical analyses to study the metabolic response of whole cells to the treatment with a hexacationic ruthenium metallaprism [1]6+ as potential anticancer drug. Human ovarian cancer cells (A2780), the corresponding cisplatin resistant cells (A2780cisR), and human embryonic kidney cells (HEK-293) were each incubated for 24 h and 72 h with [1]6+ and compared to untreated cells. Different responses were obtained depending on the cell type and incubation time. Most pronounced changes were found for lipids, choline containing compounds, glutamate and glutathione, nucleotide sugars, lactate, and some amino acids. Possible contributions of these metabolites to physiologic processes are discussed. The time-dependent metabolic response patterns suggest that A2780 cells on one hand and HEK-293 cells and A2780cisR cells on the other hand may follow different cell death pathways and exist in different temporal stages thereof.

Thiolato-bridged dinuclear arene ruthenium complexes and their potential as anticancer drugs

Water-soluble arene ruthenium complexes have been intensively studied as cytotoxic compounds for the last fifteen years, notably owing to the promising in vitro and in vivo evaluations of, respectively, RAPTA-C (η6-p-MeC6H4Pri)Ru(P-pta)Cl2 (pta = 1,3,5-triaza-7-phospha-tricyclo-[3.3.1.1]decane) from Dyson's laboratory, and the (η6-arene)Ru(en)Cl]+ (en = ethylenediamine, RAED) family of compounds from Sadler's laboratory. In this account we describe the discovery of thiolato-bridged dinuclear arene ruthenium complexes and highlight subsequent developments in the field, including their syntheses, structures, and the recent strategies for the design of thiolato-bridged dinuclear arene ruthenium bioconjugates.

Layer-by-layer grown scalable redox-active ruthenium-based molecular multilayer thin films for electrochemical applications and beyond

Here we report the first study on the electrochemical energy storage application of a surface-immobilized ruthenium complex multilayer thin film with anion storage capability. We employed a novel dinuclear ruthenium complex with tetrapodal anchoring groups to build well-ordered redox-active multilayer coatings on an indium tin oxide (ITO) surface using a layer-by-layer self-assembly process. Cyclic voltammetry (CV), UV-Visible (UV-Vis) and Raman spectroscopy showed a linear increase of peak current, absorbance and Raman intensities, respectively with the number of layers. These results indicate the formation of well-ordered multilayers of the ruthenium complex on ITO, which is further supported by the X-ray photoelectron spectroscopy analysis. The thickness of the layers can be controlled with nanometer precision. In particular, the thickest layer studied (65 molecular layers and approx. 120 nm thick) demonstrated fast electrochemical oxidation/reduction, indicating a very low attenuation of the charge transfer within the multilayer. In situ-UV-Vis and resonance Raman spectroscopy results demonstrated the reversible electrochromic/redox behavior of the ruthenium complex multilayered films on ITO with respect to the electrode potential, which is an ideal prerequisite for e.g. smart electrochemical energy storage applications. Galvanostatic charge–discharge experiments demonstrated a pseudocapacitor behavior of the multilayer film with a good specific capacitance of 92.2 F g−1 at a current density of 10 μA cm−2 and an excellent cycling stability. As demonstrated in our prototypical experiments, the fine control of physicochemical properties at nanometer scale, relatively good stability of layers under ambient conditions makes the multilayer coatings of this type an excellent material for e.g. electrochemical energy storage, as interlayers in inverted bulk heterojunction solar cell applications and as functional components in molecular electronics applications.

Hydrolytic behaviour of mono-and dithiolato-bridged dinuclear arene ruthenium complexes and their interactions with biological ligands

The hydrolysis and the reactivity of two dinuclear p-cymene ruthenium monothiolato complexes, [(η6-p-MeC6H4Pri)2Ru2Cl2(µ-Cl)(µ-S-m-9-B10C2H11)] (1) and [(η6-p-MeC6H4Pri)2¬Ru2Cl2(µ-Cl)¬(µ-S¬CH2-p-C6H4-NO2)] (2), and of two dinuclear p-cymene ruthenium dithiolato complexes, [(η6-p-MeC6H4Pri)2Ru2(µ-SCH2CH2Ph)2Cl2] (3) and [(η6-p-Me¬C6H4¬Pri)2¬Ru2(S¬CH2¬C6H4-p-O¬Me)2¬Cl2] (4) towards amino acids, nucleotides, and a single-stranded DNA dodecamer were studied using NMR and mass spectrometry. In aqueous solutions at 37 °C, the monothiolato com¬plexes 1 and 2 undergo rapid hydrolysis, irrespective of the pH value, the predominant species in D2O/acetone-d6 solution at equilibrium being the neutral hydroxo complexes [(η6-p-Me¬C6H4¬Pri)2Ru2(OD)2(µ-OD)(µ-SR)]. The dithiolato complexes 3 and 4 are stable in water under acidic conditions, but undergo slow hydrolysis under neutral and basic conditions. In both cases, the cationic hydroxo complexes [(η6-p-MeC6H4Pri)2Ru2(µ-SR)2¬(OD)¬(CD3CN)]+ are the only spe¬cies observed in D2O/CD3CN at equilibrium. Surprisingly, no adducts are observed upon addition of an excess of L-methionine or L-histidine to the aqueous solutions of the complexes. Upon addition of an excess of L-cysteine, on the other hand, 1 and 2 form the unusual cationic trithiolato complexes [(η6-p-MeC6H4Pri)2¬Ru2{µ-SCH2CH(NH2)COOH}2(µ-SR)]+ containing two bridging cysteinato li¬gands, while 3 and 4 yield cationic trithiolato complexes [(η6-p-MeC6H4Pri)2Ru2[µ-SCH2CH¬(NH2)COOH](µ-SR)2]+ containing one bridging cysteinato ligand. A representative of catio¬nic trithiolato complexes containing a cysteinato bridge of this type, [(η6-p-MeC6H4Pri)2¬Ru2[µ-S¬CH2CH(NH2)COOH](µ-SCH2-p-C6H4-But)2]+ (6) could be synthesised from the di¬thiolato complex [(η6-p-Me¬C6H4¬Pri)2-Ru2(S¬CH2¬C6H4-p-But)2Cl2] (5), isolated as the tetra¬fluo¬ro¬borate salt and fully characterised. Moreover, the mono- and dithiolato complexes 1 - 4 are inert toward nucleotides and DNA, suggesting that DNA is not a target of cytotoxic thiolato-bridged arene ruthenium complexes. In contrast to the trithiolato complexes, monothiolato and dithio¬lato complexes hydrolyse and react with L-cysteine. These results may have im¬portant implications for the mode of action of thiolato-bridged dinuclear arene ruthenium drug candidates, and suggest that their modes of action are different to those of other arene ruthenium complexes.

Observation of ventilation-induced Spo(2) oscillations in pigs: first step to noninvasive detection of cyclic recruitment of atelectasis?

High arterial partial oxygen pressure (Pao(2)) oscillations within the respiratory cycle were described recently in experimental acute lung injury. This phenomenon has been related to cyclic recruitment of atelectasis and varying pulmonary shunt fractions. Noninvasive detection of Spo(2) (oxygen saturation measured by pulse oximetry) as an indicator of cyclic collapse of atelectasis, instead of recording Pao(2) oscillations, could be of clinical interest in critical care. Spo(2) oscillations were recorded continuously in three different cases of lung damage to demonstrate the technical feasibility of this approach. To deduce Pao(2) from Spo(2), a mathematical model of the hemoglobin dissociation curve including left and right shifts was derived from the literature and adapted to the dynamic changes of oxygenation. Calculated Pao(2) amplitudes (derived from Spo(2) measurements) were compared to simultaneously measured fast changes of Pao(2), using a current standard method (fluorescence quenching of ruthenium). Peripheral hemoglobin saturation was capable to capture changes of Spo(2) within each respiratory cycle. For the first time, Spo(2) oscillations due to cyclic recruitment of atelectasis within a respiratory cycle were determined by photoplethysmography, a technology that can be readily applied noninvasively in clinical routine. A mathematic model to calculate the respective Pao(2) changes was developed and its applicability tested.

Protein buffering in model systems and in whole human saliva

The aim of this study was to quantify the buffer attributes (value, power, range and optimum) of two model systems for whole human resting saliva, the purified proteins from whole human resting saliva and single proteins. Two model systems, the first containing amyloglucosidase and lysozyme, and the second containing amyloglucosidase and alpha-amylase, were shown to provide, in combination with hydrogencarbonate and di-hydrogenphosphate, almost identical buffer attributes as whole human resting saliva. It was further demonstrated that changes in the protein concentration as small as 0.1% may change the buffer value of a buffer solution up to 15 times. Additionally, it was shown that there was a protein concentration change in the same range (0.16%) between saliva samples collected at the time periods of 13:00 and others collected at 9:00 am and 17:00. The mode of the protein expression changed between these samples corresponded to the change in basic buffer power and the change of the buffer value at pH 6.7. Finally, SDS Page and Ruthenium II tris (bathophenantroline disulfonate) staining unveiled a constant protein expression in all samples except for one 50 kDa protein band. As the change in the expression pattern of that 50 kDa protein band corresponded to the change in basic buffer power and the buffer value at pH 6.7, it was reasonable to conclude that this 50 kDa protein band may contain the protein(s) belonging to the protein buffer system of human saliva.