Serological and DNA-based evaluation of Chlamydia pneumoniae infection in inflammatory bowel disease

OBJECTIVES: Chlamydia has been associated with autoimmune diseases, but a link between chlamydial infection and the aetiopathogenesis of inflammatory bowel disease (IBD) remains controversial. In this study we assessed the relationship between chlamydial infection and IBD, as evidenced by serological measurement and DNA analysis of mucosal biopsy specimens. PATIENTS AND METHODS: The sera of 78 patients with Crohn's disease (CD), 24 patients with ulcerative colitis (UC), 73 healthy family members, and 20 healthy controls were tested for anti-C. pneumoniae IgG titres. A subgroup consisting of 13 UC and 39 CD patients was screened for the presence of chlamydial DNA on 42 inflamed versus 30 non-inflamed biopsy specimens and for mutations of their NOD2/CARD15 gene. RESULTS: Anti-C. pneumoniae IgG antibodies were found in the sera of 32 (41%) patients with CD, 11 (46%) patients with UC, 35 (48%) of unaffected family members, and nine (45%) unrelated healthy controls. Thirty-five percent of the control, 18% CD and 24% UC biopsy specimens contained C. pneumoniae DNA. In CD, however, C. pneumoniae DNA was significantly more frequently found in inflamed (27%) versus non-inflamed (8%) biopsy specimens (P < 0.05, Fisher's exact test). The frequencies of NOD2/CARD15 mutations were 33% for CD patients with C. pneumoniae DNA compared to 47% for CD patients without C. pneumoniae DNA. CONCLUSION: We found no marked differences in respect to anti-C. pneumoniae serum IgG or C. pneumoniae DNA between healthy controls and patients with IBD. However, in CD patients, inflamed tissue specimens contained significantly more likely C. pneumoniae DNA compared with biopsies from unaffected areas. Thus C. pneumoniae is unlikely to be of pathogenic importance in IBD while it may still influence local clinical manifestations.

Reporting of randomized controlled trials in Hodgkin lymphoma in biomedical journals

BACKGROUND: Randomized controlled trials (RCTs) are the best tool to evaluate the effectiveness of clinical interventions. The Consolidated Standards for Reporting Trials (CONSORT) statement was introduced in 1996 to improve reporting of RCTs. We aimed to determine the extent of ambiguity and reporting quality as assessed by adherence to the CONSORT statement in published reports of RCTs involving patients with Hodgkin lymphoma from 1966 through 2002. METHODS: We analyzed 242 published full-text reports of RCTs in patients with Hodgkin lymphoma. Quality of reporting was assessed using a 14-item questionnaire based on the CONSORT checklist. Reporting was studied in two pre-CONSORT periods (1966-1988 and 1989-1995) and one post-CONSORT period (1996-2002). RESULTS: Only six of the 14 items were addressed in 75% or more of the studies in all three time periods. Most items that are necessary to assess the methodologic quality of a study were reported by fewer than 20% of the studies. Improvements over time were seen for some items, including the description of statistics methods used, reporting of primary research outcomes, performance of power calculations, method of randomization and concealment allocation, and having performed intention-to-treat analysis. CONCLUSIONS: Despite recent improvements, reporting levels of CONSORT items in RCTs involving patients with Hodgkin lymphoma remain unsatisfactory. Further concerted action by journal editors, learned societies, and medical schools is necessary to make authors even more aware of the need to improve the reporting RCTs in medical journals to allow assessment of validity of published clinical research.

Practical sources of error in measuring pulmonary artery occlusion pressure: a study in participants of a special intensivist training program of The Scandinavian Society of Anaesthesiology and Intensive Care Medicine (SSAI)

BACKGROUND: Physiological data obtained with the pulmonary artery catheter (PAC) are susceptible to errors in measurement and interpretation. Little attention has been paid to the relevance of errors in hemodynamic measurements performed in the intensive care unit (ICU). The aim of this study was to assess the errors related to the technical aspects (zeroing and reference level) and actual measurement (curve interpretation) of the pulmonary artery occlusion pressure (PAOP). METHODS: Forty-seven participants in a special ICU training program and 22 ICU nurses were tested without pre-announcement. All participants had previously been exposed to the clinical use of the method. The first task was to set up a pressure measurement system for PAC (zeroing and reference level) and the second to measure the PAOP. RESULTS: The median difference from the reference mid-axillary zero level was - 3 cm (-8 to + 9 cm) for physicians and -1 cm (-5 to + 1 cm) for nurses. The median difference from the reference PAOP was 0 mmHg (-3 to 5 mmHg) for physicians and 1 mmHg (-1 to 15 mmHg) for nurses. When PAOP values were adjusted for the differences from the reference transducer level, the median differences from the reference PAOP values were 2 mmHg (-6 to 9 mmHg) for physicians and 2 mmHg (-6 to 16 mmHg) for nurses. CONCLUSIONS: Measurement of the PAOP is susceptible to substantial error as a result of practical mistakes. Comparison of results between ICUs or practitioners is therefore not possible.

Genetic engineering and the world trade system

While the WTO agreements do not regulate the use of biotechnology per se, their rules can have a profound impact on the use of the technology for both commercial and non-commercial purposes. This book seeks to identify the challenges to international trade regulation that arise from biotechnology. The contributions examine whether existing international obligations of WTO Members are appropriate to deal with the issues arising for the use of biotechnology and whether there is a need for new international legal instruments, including a potential WTO Agreement on Biotechnology. They combine various perspectives on and topics relating to genetic engineering and trade, including human rights and gender; intellectual property rights; traditional knowledge and access and benefit sharing; food security, trade and agricultural production and food safety; and medical research, cloning and international trade.

Multivariable adjustments counteract spectrum and test review bias in accuracy studies

OBJECTIVES: The STAndards for Reporting studies of Diagnostic accuracy (STARD) for investigators and editors and the Quality Assessment of Diagnostic Accuracy Studies (QUADAS) for reviewers and readers offer guidelines for the quality and reporting of test accuracy studies. These guidelines address and propose some solutions to two major threats to validity: spectrum bias and test review bias. STUDY DESIGN AND SETTING: Using a clinical example, we demonstrate that these solutions fail and propose an alternative solution that concomitantly addresses both sources of bias. We also derive formulas that prove the generality of our arguments. RESULTS: A logical extension of our ideas is to extend STARD item 23 by adding a requirement for multivariable statistical adjustment using information collected in QUADAS items 1, 2, and 12 and STARD items 3-5, 11, 15, and 18. CONCLUSION: We recommend reporting not only variation of diagnostic accuracy across subgroups (STARD item 23) but also the effects of the multivariable adjustments on test performance. We also suggest that the QUADAS be supplemented by an item addressing the appropriateness of statistical methods, in particular whether multivariable adjustments have been included in the analysis.

Target difficulty, intra-year target revisions and firm performance: evidence from business units' targets

Target difficulty is often argued to increase performance. While this association is well established in experimental research, empirical evidence in field research is rather mixed. We attempt to explain this inconsistency by analyzing the importance of intra-year target revisions, which are especially prevalent in real-world field settings. Using survey and archival data from 97 firms, we find that firms with more challenging business unit targets revise targets more often, in line with asymmetric, downward target revisions. Results further show that the degree to which targets are revised during a period results in negative effects on firm performance, as the anticipation of revision negatively affects the business unit management’s performance incentives. Additionally, we find that using targets predominantly for either decision-making or control influences the overall performance effects of target revisions. Our findings may partially explain the mixed field study evidence regarding the effects of target difficulty.

Torque expression of 0.018 and 0.022 inch conventional brackets

The aim of this study was to assess the effect of the moments generated with low- and high-torque brackets. Four different bracket prescription-slot combinations of the same bracket type (Mini Diamond® Twin) were evaluated: high-torque 0.018 and 0.022 inch and low-torque 0.018 and 0.022 inch. These brackets were bonded on identical maxillary acrylic resin models with levelled and aligned teeth and each model was mounted on the orthodontic measurement and simulation system (OMSS). Ten specimens of 0.017 × 0.025 inch and ten 0.019 × 0.025 inch stainless steel archwires (ORMCO) were evaluated in the low- and high-torque 0.018 inch and 0.022 inch brackets, respectively. The wires were ligated with elastomerics into the brackets and each measurement was repeated once after religation. Two-way analysis of variance and t-test were conducted to compare the generated moments between wires at low- and high-torque brackets separately. The maximum moment generated by the 0.017 × 0.025 inch stainless steel archwire in the 0.018 inch brackets at +15 degrees ranged from 14.33 and 12.95 Nmm for the high- and low-torque brackets, respectively. The measured torque in the 0.022 inch brackets with the 0.019 × 0.025 inch stainless steel archwire was 9.32 and 6.48 Nmm, respectively. The recorded differences of maximum moments between the high- and low-torque series were statistically significant. High-torque brackets produced higher moments compared with low-torque brackets. Additionally, in both high- and low-torque configurations, the thicker 0.019 × 0.025 inch steel archwire in the 0.022 inch slot system generated lower moments in comparison with the 0.017 × 0.025 inch steel archwire in the 0.018 inch slot system.

A comparative assessment of torque generated by lingual and conventional brackets

The aim of this study was to assess the effect of bracket type on the labiopalatal moments generated by lingual and conventional brackets. Incognito™ lingual brackets (3M Unitek), STb™ lingual brackets (Light Lingual System; ORMCO), In-Ovation L lingual brackets (DENTSPLY GAC), and conventional 0.018 inch slot brackets (Gemini; 3M Unitek) were bonded on identical maxillary acrylic resin models with levelled and aligned teeth. Each model was mounted on the orthodontic measurement and simulation system and 10 0.0175 × 0.0175 TMA wires were used for each bracket type. The wire was ligated with elastomerics into the Incognito, STb, and conventional brackets and each measurement was repeated once after religation. A 15 degrees buccal root torque (+15 degrees) and then a 15 degrees palatal root torque (-15 degrees) were gradually applied to the right central incisor bracket. After each activation, the bracket returned to its initial position and the moments in the sagittal plane were recorded during these rotations of the bracket. One-way analysis of variance with post hoc multiple comparisons (Tukey test at 0.05 error rate) was conducted to assess the effect on bracket type on the generated moments. The magnitude of maximum moment at +15 degrees ranged 8.8, 8.2, 7.1, and 5.8 Nmm for the Incognito, STb, conventional Gemini, and the In-Ovation L brackets, respectively; similar values were recorded at -15 degrees: 8.6, 8.1, 7.0, and 5.7 Nmm, respectively. The recorded differences of maximum moments were statistically significant, except between the Incognito and STb brackets. Additionally, the torque angles were evaluated at which the crown torque fell well below the minimum levels of 5.0 Nmm, as well as the moment/torque ratio at the last part of the activation/deactivation curve, between 10 and 15 degrees. The lowest torque expression was observed at the self-ligating lingual brackets, followed by the conventional brackets. The Incognito and STb lingual brackets generated the highest moments.

A comparative assessment of forces and moments generated by lingual and conventional brackets

The aim of this study was to assess the effect of bracket type on the labiopalatal forces and moments generated in the sagittal plane. Incognito™ lingual brackets (3M Unitek), STb™ lingual brackets (Light Lingual System; ORMCO), and conventional 0.018 inch slot brackets (Gemini; 3M Unitek) were bonded on three identical maxillary acrylic resin models, with a palatally displaced right lateral incisor. The transfer trays for the indirect bonding of the lingual brackets were constructed in certified laboratories. Each model was mounted on the orthodontic measurement and simulation system and ten 0.013 inch CuNiTi wires were used for each bracket type. The wire was ligated with elastomerics and each measurement was repeated once after re-ligation. The labiopalatal forces and the moments in the sagittal plane were recorded on the right lateral incisor. One-way analysis of variance and post hoc Scheffe pairwise comparisons were used to assess the effect on bracket type on the generated forces and moments. The magnitude of forces ranged from 1.62, 1.27, and 1.81 N for the STb, conventional, and Incognito brackets, respectively; the corresponding moments were 2.01, 1.45, and 2.19 N mm, respectively. Bracket type was a significant predictor of the generated forces (P < 0.001) and moments (P < 0.001). The produced forces were different among all three bracket types, whereas the generated moments differed between conventional and lingual brackets but not between lingual brackets.

In vivo bisphenol-a release from dental pit and fissure sealants: a systematic review

OBJECTIVE To search the literature and assess the short- and long-term release of bisphenol-A (BPA) in human tissues after treatment with dental sealants. DATA Two review authors performed data extraction independently and in duplicate using data collection forms. Disagreements were resolved by discussion with an arbiter. SOURCES Electronic database searches of published and unpublished literature were performed. The following electronic databases with no language and publication date restrictions were searched: MEDLINE (via Ovid and Pubmed), EMBASE (via ovid), Cochrane Trials Register and CENTRAL. The reference lists of all eligible studies were hand-searched. STUDY SELECTION In the absence of RCTs, six interventional and two observational studies, examining in vivo BPA release in human salivary, blood and urinary samples, were included. Due to the heterogeneity in methodology and reporting, the main synthesis of the results was qualitative. The quantitative synthesis based on the weighted Z-test could only include two studies. BPA levels identified in saliva ranged from traces below the method's detection limit to 30 μg/ml. In urine, BPA quantities spanned from 0.17 mg/g to 45.4 mg/g. BPA was not traced in any blood sample at any point of time in the relevant studies. The quantitative analysis showed evidence of BPA release one hour after sealant placement compared to the amount traced before restoration (Stouffer's z trend: <0.001). CONCLUSIONS The available evidence on this topic derived from studies that represent a moderate level of evidence. Nevertheless, the available evidence supports that BPA is released in saliva after sealant placement. CLINICAL SIGNIFICANCE From the qualititative and quantitative synthesis of studies, it is reasonable to conclude that BPA is released after placement of some dental pit and fissure sealants in the oral cavity. The biggest quantities are detected in saliva immediately after or one hour after their placement.

Bisphenol-A and residual monomer leaching from orthodontic adhesive resins and polycarbonate brackets: a systematic review

INTRODUCTION The objective of this systematic review was to assess the short- and long-term release of components of orthodontic adhesives and polycarbonate brackets in the oral environment. METHODS Electronic database searches of published and unpublished literature were performed. The following electronic databases with no language and publication date restrictions were searched: MEDLINE (via Ovid and PubMed), EMBASE (via Ovid), Cochrane Oral Health Group's Trials Register, and CENTRAL. Unpublished literature was searched on ClinicalTrials.gov, the National Research Register, and Pro-Quest Dissertation Abstracts and Thesis database. The reference lists of all eligible studies were checked for additional studies. Two review authors performed data extraction independently and in duplicate using data collection forms. Disagreements were resolved by discussion or the involvement of an arbiter. RESULTS No randomized controlled trial was identified. In the absence of randomized controlled trials, observational studies were included. Eleven studies met the inclusion criteria. All were observational studies conducted in vivo or in vitro. The bisphenol-A release from orthodontic bonding resins was found to be between 0.85 and 20.88 ng per milliliter in vivo, and from traces to 65.67 ppm in vitro. Polycarbonate brackets released amounts of 22.24 μg per gram in ethanol solution and 697 μg per gram after 40 months in water. Bis-GMA and TEGDMA leaching in vitro reached levels of 64 and 174 mg per 10 μL, respectively. Because of the heterogeneity in methodologies and reporting, only qualitative synthesis was performed. CONCLUSIONS The available evidence on this topic derived from observational in-vivo and in-vitro studies that represent a moderate level of evidence. The variety of setups and the different units allied to the diversity of reporting among studies did not allow calculation of pooled estimates.

Harmonised monitoring of antimicrobial resistance in Salmonella and Campylobacter isolates from food animals in the European Union

Many Member States of the European Union (EU) currently monitor antimicrobial resistance in zoonotic agents, including Salmonella and Campylobacter. According to Directive 2003/99/EC, Member States shall ensure that the monitoring provides comparable data on the occurrence of antimicrobial resistance. The European Commission asked the European Food Safety Authority to prepare detailed specifications for harmonised schemes for monitoring antimicrobial resistance. The objective of these specifications is to lay down provisions for a monitoring and reporting scheme for Salmonella in fowl (Gallus gallus), turkeys and pigs, and for Campylobacter jejuni and Campylobacter coli in broiler chickens. The current specifications are considered to be a first step towards a gradual implementation of comprehensive antimicrobial resistance monitoring at the EU level. These specifications propose to test a common set of antimicrobial agents against available cut-off values and a specified concentration range to determine the susceptibility of Salmonella and Campylobacter. Using isolates collected through programmes in which the sampling frame covers all epidemiological units of the national production, the target number of Salmonella isolates to be included in the antimicrobial resistance monitoring per Member State per year is 170 for each study population (i.e., laying hens, broilers, turkeys and slaughter pigs). The target number of Campylobacter isolates to be included in the antimicrobial resistance monitoring per Member State per year is 170 for each study population (i.e., broilers). The results of the antimicrobial resistance monitoring are assessed and reported in the yearly national report on trends and sources of zoonoses, zoonotic agents and antimicrobial resistance.

Mental health-care utilization in survivors of childhood cancer and siblings: the Swiss childhood cancer survivor study

PURPOSE We aimed to (1) describe the utilization of mental health-care in survivors and siblings, the association with severity of distress, and visits to other professionals in distressed survivors not utilizing mental health-care; and (2) identify factors associated with utilization of mental health-care in distressed survivors. METHODS Within the Swiss Childhood Cancer Survivor Study, we sent postal questionnaires to all participants aged <16 years at diagnosis (1976-2003), who survived ≥5 years after diagnosis and were aged ≥16 years at study. Survivors and siblings could indicate if they utilized mental health-care in the past year. Psychological distress was assessed with the Brief Symptom Inventory-18 (BSI-18). Participants with scores T ≥ 57 on two of three scales or the Global Severity Index were considered distressed. RESULTS We included 1,602 survivors and 703 siblings. Overall, 160 (10 %) and 53 (8 %), utilized mental health-care and 203 (14 %) and 127 (14 %) were considered distressed. Among these, 69 (34 %) survivors and 20 (24 %) siblings had utilized mental health-care. Participants with higher distress were more likely to utilize mental health-care. Distressed survivors not utilizing mental health-care were more likely to see a medical specialist than nondistressed. In the multivariable regression, factors associated with utilizing mental health-care were higher psychological distress and reporting late effects. CONCLUSIONS Our results underline the importance of developing interventional programs and implementing psychological screening in follow-up of survivors. It is also important to systematically address siblings' needs. In follow-up, patients at risk should be informed about existing possibilities or advised to visit mental health professionals.

Adjudication-related processes are underreported and lack standardization in clinical trials of venous thromboembolism: a systematic review

OBJECTIVES Although the use of an adjudication committee (AC) for outcomes is recommended in randomized controlled trials, there are limited data on the process of adjudication. We therefore aimed to assess whether the reporting of the adjudication process in venous thromboembolism (VTE) trials meets existing quality standards and which characteristics of trials influence the use of an AC. STUDY DESIGN AND SETTING We systematically searched MEDLINE and the Cochrane Library from January 1, 2003, to June 1, 2012, for randomized controlled trials on VTE. We abstracted information about characteristics and quality of trials and reporting of adjudication processes. We used stepwise backward logistic regression model to identify trial characteristics independently associated with the use of an AC. RESULTS We included 161 trials. Of these, 68.9% (111 of 161) reported the use of an AC. Overall, 99.1% (110 of 111) of trials with an AC used independent or blinded ACs, 14.4% (16 of 111) reported how the adjudication decision was reached within the AC, and 4.5% (5 of 111) reported on whether the reliability of adjudication was assessed. In multivariate analyses, multicenter trials [odds ratio (OR), 8.6; 95% confidence interval (CI): 2.7, 27.8], use of a data safety-monitoring board (OR, 3.7; 95% CI: 1.2, 11.6), and VTE as the primary outcome (OR, 5.7; 95% CI: 1.7, 19.4) were associated with the use of an AC. Trials without random allocation concealment (OR, 0.3; 95% CI: 0.1, 0.8) and open-label trials (OR, 0.3; 95% CI: 0.1, 1.0) were less likely to report an AC. CONCLUSION Recommended processes of adjudication are underreported and lack standardization in VTE-related clinical trials. The use of an AC varies substantially by trial characteristics.

Changes in skill variety predict job satisfaction and psychosomatic complaints

Purpose Skill variety in terms of opportunities for utilizing different skills is an important element of job design; it is associated with well-being and health, but most pertinent research is cross-sectional. Positive associations with well-being, and with intellectual flexibility, have been shown longitudinally, but these studies focus on levels of skill variety at time 1 and do not use changes in skill variety as a predictor. We expect changes in skill variety to be associated with well-being in terms of higher job satisfaction and fewer psychosomatic complaints. Design/Methodology Skill variety, job satisfaction, and psychosomatic complaints were assessed in 2005, 2006, 2007, and 2010 (N = 317 young employees). Data were analyzed using latent growth modeling. Results Skill variety decreased over the first three years after labor market entry. Initial levels of skill variety predicted higher job satisfaction in 2010. Steeper decreases in skill variety from 2005 to 2007 predicted lower levels of job satisfaction and more psychosomatic complaints three years later. Limitations This longitudinal study used only self-report. Research/Practical Implications Our results extend the often found association between challenging work content and job satisfaction in terms of a) showing it for young employees, b) longitudinally, c) not only for initial level but also for changes, and d) for psychosomatic complaints; they underscore the importance of maintaining a high level of challenging work content beyond the initial phase by enriching work as routine increases. Originality/Value Compared to the few existing longitudinal studies, we focus on changes and their relations with well-being.