Impact of normal and shear stresses due to wheel slip on hydrological properties of an agricultural clay loam: Experimental and new computerized approach

The main purpose of this study was to evaluate the effect that mechanical stresses acting under the slipping driving wheels of agricultural equipment have on the soil’s pore system and water flow process (surface runoff generation during extreme event). The field experiment simulated low slip (1%) and high slip (27%) on a clay loam. The stress on the soil surface and changes in the amounts of water flowing from macropores were simulated using the Tires/tracks And Soil Compaction (TASC) tool and the MACRO model, respectively. Taking a 65 kW tractor on a clay loam as a reference, results showed that an increase in slip of the rear wheels from 1% to 27% caused normal stress to increase from 90.6 kPa to 104.4 kPa at the topsoil level, and the maximum shear contact stress to rise drastically from 6.0 kPa to 61.6 kPa. At 27% slip, topsoil was sheared and displaced over a distance of 0.35 m. Excessive normal and shear stress values with high slip caused severe reductions of the soil’s macroporosity, saturated hydraulic conductivity, and water quantities flowing from topsoil macropores. Assuming that, under conditions of intense rainfall on sloping land, a loss in vertical water flow would mean an increase in surface runoff, we calculated that a rainfall intensity of 100 mm h-1 and a rainfall duration of 1 h would increase the runoff coefficient to 0.79 at low slip and to 1.00 at high slip, indicating that 100% of rainwater would be transformed into surface runoff at high slip. We expect that these effects have a significant impact on soil erosion and floods in steeper terrain (slope > 15°) and across larger surface areas (> 16 m2) than those included in our study.

Hygrical shrinkage stresses in tiling systems: Numerical modeling combined with field studies

To track down potential sites of material failure in the tile–mortar–substrate systems, locations and intensities of stress concentrations owing to drying-induced shrinkage are investigated. For this purpose, mechanical properties were measured on real systems and used as input parameters for numerical modeling of the effect of shrinkage of substrate and/or mortar using the finite element code Abaqus. On the base of different geometrical set-ups we demonstrate that stress concentrations in the mortar can become critical when (i) substantial mortar shrinkage occurs, (ii) substrate shrinkage can accumulate over considerable spatial distances, particularly (iii) in situations where the mortar layer is not separated from the substrate by a flexible waterproofing membrane. Hence material failure in the system tile–mortar–substrate can be prevented (or reduced) by (i) an application of the tiles after the major stages of substrate shrinkage, (ii) the use of elasto-plastic deformable tile adhesives which can react elastically on local stress concentrations, (iii) the implementation of flexible membranes, and (iv) a reduction of the field size by the installation of flexible joints.

Daily and seasonal thermal stresses in tilings: a field survey combined with numeric modeling

This study investigates thermally induced tensile stresses in ceramic tilings. Daily and seasonal thermal cycles, as well as, rare but extreme events, such as a hail-storm striking a heated terrace tiling, were studied in the field and by numerical modeling investigations. The field surveys delivered temperature– time diagrams and temperature profiles across tiling systems. These data were taken as input parameters for modeling the stress distribution in the tiling system in order to detect potential sites for material failure. Dependent on the thermal scenario (e.g., slow heating of the entire structure during morning and afternoon, or a rapid cooling of the tiles by a rain storm) the modeling indicates specific locations with high tensile stresses. Typically regions along the rim of the tiling field showed stresses, which can become critical with respect to the adhesion strength. Over the years, ongoing cycles of thermal expansion–contraction result in material fatigue promoting the propagation of cracks. However, the installation of flexible waterproofing membranes (applied between substrate and tile adhesive) represents an efficient technical innovation to reduce such crack propagation as confirmed by both numerical modeling results and microstructural studies on real systems.

Minimal residual disease in cancer therapy - Small things make all the difference

Minimal residual disease (MRD) is a major hurdle in the eradication of malignant tumors. Despite the high sensitivity of various cancers to treatment, some residual cancer cells persist and lead to tumor recurrence and treatment failure. Obvious reasons for residual disease include mechanisms of secondary therapy resistance, such as the presence of mutant cells that are insensitive to the drugs, or the presence of cells that become drug resistant due to activation of survival pathways. In addition to such unambiguous resistance modalities, several patients with relapsing tumors do not show refractory disease and respond again when the initial therapy is repeated. These cases cannot be explained by the selection of mutant tumor cells, and the precise mechanisms underlying this clinical drug resistance are ill-defined. In the current review, we put special emphasis on cell-intrinsic and -extrinsic mechanisms that may explain mechanisms of MRD that are independent of secondary therapy resistance. In particular, we show that studying genetically engineered mouse models (GEMMs), which highly resemble the disease in humans, provides a complementary approach to understand MRD. In these animal models, specific mechanisms of secondary resistance can be excluded by targeted genetic modifications. This allows a clear distinction between the selection of cells with stable secondary resistance and mechanisms that result in the survival of residual cells but do not provoke secondary drug resistance. Mechanisms that may explain the latter feature include special biochemical defense properties of cancer stem cells, metabolic peculiarities such as the dependence on autophagy, drug-tolerant persisting cells, intratumoral heterogeneity, secreted factors from the microenvironment, tumor vascularization patterns and immunosurveillance-related factors. We propose in the current review that a common feature of these various mechanisms is cancer cell dormancy. Therefore, dormant cancer cells appear to be an important target in the attempt to eradicate residual cancer cells, and eventually cure patients who repeatedly respond to anticancer therapy but lack complete tumor eradication.

LOGITCPRPLOT: Stata module to graph component-plus-residual plot for logistic regression

logitcprplot can be used after logistic regression for graphing a component-plus-residual plot (a.k.a. partial residual plot) for a given predictor, including a lowess, local polynomial, restricted cubic spline, fractional polynomial, penalized spline, regression spline, running line, or adaptive variable span running line smooth

CPRPLOT2: Stata module to graph component-plus-residual plots for transformed regressors

cprplot2 is a variation of official Stata's cprplot and is used for graphing component-plus-residual plots (a.k.a. partial residual plots). Additional features (compared to cprplot): (1) cprplot2 can handle variables that enter the model repeatedly via different transformations (for example, polynomials). (2) cprplot2 can display component-plus-residual plots using the original units for transformed variables in the model. (3) A wrapper is provided to quickly display several component-plus-residual plots in a single image.