Effects of anxiety on decision making and visual search Behaviour in dynamic, time-constrained situations

Einleitung Aktuelle empirische Befunde deuten darauf hin, dass Sportler/innen durch Stress und erhöhte Angst eine reduzierte Effizienz bei der Entscheidungsfindung aufweisen (Wilson, 2008). Erklärt werden kann dieser Befund durch die Attentional-Control-Theory (ACT, Eysenck et al., 2007), die postuliert, dass aufmerksamkeitslenkende Prozesse unter Angst gestört werden. Um diese Annahme für komplexe Situationen im Sport zu prüfen, wurden Fußballspieler unter erhöhten und regulären Druckbedingungen verglichen. Methode Je 11 Experten und Nicht-Experten hatten aus der Perspektive des Abwehrspielers die Aufgabe, in zwei mal 24 Spielsituationen so schnell und korrekt wie möglich verbal anzugeben, welche Aktion der ballführende Spieler (in naher vs. ferner Spielsituation) nach Ausblendung der Szene ausführen wird. Während im ersten Block der Druck nicht erhöht wurde, wurden Druckbedingungen im zweiten Block u.a. durch eine Wettkampfsituation und „falscher“ Ergebnisrückmeldung gesteigert. Entscheidungs- und Blickverhalten (u.a. Anzahl Fixationen), Pupillengröße, Zustandsangst und „Mental Effort“ (Wilson, 2008) wurden erfasst. Neben Expertiseunterschieden wurde erwartet, dass erhöhte Angst die Entscheidungseffizienz sowie das Blickverhalten stört (ACT-Annahme), was mit 2 (Experten/Nicht-Experten) x 2 (nahe/ferne Spielsituation) x 2 (hohe/reguläre Druckbedingung) ANOVAs (? = .05) mit Messwiederholungen auf den letzten beiden Faktoren geprüft wurde. Ergebnisse Druckmanipulationen führten zu höherer Zustandsangst und größeren Pupillendurchmessern. Neben Expertiseunterschieden – Experten antworteten schneller, korrekter und zeigten ein situationsangepasstes visuelles Suchverhalten – wiesen beide Gruppen in Drucksituationen längere Antwortzeiten und höheren Mental Effort auf. Erhöhter Druck führte bei Experten zur Reduktion der Fixationsortwechsel für ferne Spielsituationen. Nicht-Experten differenzierten ihr Suchverhalten weder zwischen Bedingungen noch für Spielsituationen. Diskussion Die Resultate bestätigen die ACT-Annahme, dass Angst und Stress die sportliche Leistung durch längere Reaktionszeiten, höhere kognitive Anstrengung und ein teilweise ineffizientes visuelles Suchverhalten negativ beeinflusst. Eine gestörte Balance zwischen Top-Down und Bottom-Up-Prozessen könnte die Ursache sein (Eysenck et al., 2007). Literatur Eysenck, M. W., Derakshan, N., Santos, R., & Calvo, M. G. (2007). Anxiety and cognitive performance: Attentional control theory. Emotion, 7, 336–353. Wilson, M. (2008). From processing efficiency to attentional control: A mechanistic account of the anxiety-performance relationship. International Review of Sport and Exercise Psychology, 1, 184– 201. 2 Vorträge und Poster

Digital Data Collection and Processing in Field and Lab: The Approach of Kinneret Regional Project

The paper showcases the field- and lab-documentation system developed for Kinneret Regional Project, an international archaeological expedition to the Northwestern shore of the Sea of Galilee (Israel) under the auspices of the University of Bern, the University of Helsinki, Leiden University and Wofford College. The core of the data management system is a fully relational, server-based database framework, which also includes time-based and static GIS services, stratigraphic analysis tools and fully indexed document/digital image archives. Data collection in the field is based on mobile, hand-held devices equipped with a custom-tailored stand-alone application. Comprehensive three-dimensional documentation of all finds and findings is achieved by means of total stations and/or high-precision GPS devices. All archaeological information retrieved in the field – including tachymetric data – is synched with the core system on the fly and thus immediately available for further processing in the field lab (within the local network) or for post-excavation analysis at remote institutions (via the WWW). Besides a short demonstration of the main functionalities, the paper also presents some of the key technologies used and illustrates usability aspects of the system’s individual components.

Signal Processing for the Measurement of the Deuterium/Hydrogen Ratio in the Local Interstellar Medium

We report on a comprehensive signal processing procedure for very low signal levels for the measurement of neutral deuterium in the local interstellar medium from a spacecraft in Earth orbit. The deuterium measurements were performed with the IBEX-Lo camera on NASA’s Interstellar Boundary Explorer (IBEX) satellite. Our analysis technique for these data consists of creating a mass relation in three-dimensional time of flight space to accurately determine the position of the predicted D events, to precisely model the tail of the H events in the region where the H tail events are near the expected D events, and then to separate the H tail from the observations to extract the very faint D signal. This interstellar D signal, which is expected to be a few counts per year, is extracted from a strong terrestrial background signal, consisting of sputter products from the sensor’s conversion surface. As reference we accurately measure the terrestrial D/H ratio in these sputtered products and then discriminate this terrestrial background source. During the three years of the mission time when the deuterium signal was visible to IBEX, the observation geometry and orbit allowed for a total observation time of 115.3 days. Because of the spinning of the spacecraft and the stepping through eight energy channels the actual observing time of the interstellar wind was only 1.44 days. With the optimised data analysis we found three counts that could be attributed to interstellar deuterium. These results update our earlier work.

A Parallel Solver for the Time-Periodic Navier–Stokes Equations

We investigate parallel algorithms for the solution of the Navier–Stokes equations in space-time. For periodic solutions, the discretized problem can be written as a large non-linear system of equations. This system of equations is solved by a Newton iteration. The Newton correction is computed using a preconditioned GMRES solver. The parallel performance of the algorithm is illustrated.

Larger visual stimuli are perceived to last longer from time to time: The internal clock is not affected by nontemporal visual stimulus size

Performance on interval timing is often explained by the assumption of an internal clock based on neural counting. According to this account, a neural pacemaker generates pulses, and the number of pulses relating to a physical time interval is recorded by a counter. Thus, the number of accumulated pulses is the internal representation of this interval. Several studies demonstrated that large visual stimuli are perceived to last longer than smaller ones presented for the same duration. The present study was designed to investigate whether nontemporal visual stimulus size directly affects the internal clock. For this purpose, a temporal reproduction task was applied. Sixty participants were randomly assigned to one of two experimental conditions with stimulus size being experimentally varied within either the target or the reproduction interval. A direct effect of nontemporal stimulus size on the pacemaker-counter system should become evident irrespective of whether stimulus size was experimentally varied within the target or the reproduction interval. An effect of nontemporal stimulus size on reproduced duration only occurred when stimulus size was varied during the target interval. This finding clearly argues against the notion that nontemporal visual stimulus size directly affects the internal clock. Furthermore, our findings ruled out a decisional bias as a possible cause of the observed differential effect of stimulus size on reproduced duration. Rather the effect of stimulus size appeared to originate from the memory stage of temporal information processing at which the timing signal from the pacemaker-counter component is encoded in reference memory.

XMapTools: a MATLAB©-based program for electron microprobe X-ray image processing and geothermobarometry

XMapTools is a MATLAB©-based graphical user interface program for electron microprobe X-ray image processing, which can be used to estimate the pressure–temperature conditions of crystallization of minerals in metamorphic rocks. This program (available online at http://www.xmaptools.com) provides a method to standardize raw electron microprobe data and includes functions to calculate the oxide weight percent compositions for various minerals. A set of external functions is provided to calculate structural formulae from the standardized analyses as well as to estimate pressure–temperature conditions of crystallization, using empirical and semi-empirical thermobarometers from the literature. Two graphical user interface modules, Chem2D and Triplot3D, are used to plot mineral compositions into binary and ternary diagrams. As an example, the software is used to study a high-pressure Himalayan eclogite sample from the Stak massif in Pakistan. The high-pressure paragenesis consisting of omphacite and garnet has been retrogressed to a symplectitic assemblage of amphibole, plagioclase and clinopyroxene. Mineral compositions corresponding to ~165,000 analyses yield estimates for the eclogitic pressure–temperature retrograde path from 25 kbar to 9 kbar. Corresponding pressure–temperature maps were plotted and used to interpret the link between the equilibrium conditions of crystallization and the symplectitic microstructures. This example illustrates the usefulness of XMapTools for studying variations of the chemical composition of minerals and for retrieving information on metamorphic conditions on a microscale, towards computation of continuous pressure–temperature-and relative time path in zoned metamorphic minerals not affected by post-crystallization diffusion.

Real-Time Localization Using Software Defined Radio

Service providers make use of cost-effective wireless solutions to identify, localize, and possibly track users using their carried MDs to support added services, such as geo-advertisement, security, and management. Indoor and outdoor hotspot areas play a significant role for such services. However, GPS does not work in many of these areas. To solve this problem, service providers leverage available indoor radio technologies, such as WiFi, GSM, and LTE, to identify and localize users. We focus our research on passive services provided by third parties, which are responsible for (i) data acquisition and (ii) processing, and network-based services, where (i) and (ii) are done inside the serving network. For better understanding of parameters that affect indoor localization, we investigate several factors that affect indoor signal propagation for both Bluetooth and WiFi technologies. For GSM-based passive services, we developed first a data acquisition module: a GSM receiver that can overhear GSM uplink messages transmitted by MDs while being invisible. A set of optimizations were made for the receiver components to support wideband capturing of the GSM spectrum while operating in real-time. Processing the wide-spectrum of the GSM is possible using a proposed distributed processing approach over an IP network. Then, to overcome the lack of information about tracked devices’ radio settings, we developed two novel localization algorithms that rely on proximity-based solutions to estimate in real environments devices’ locations. Given the challenging indoor environment on radio signals, such as NLOS reception and multipath propagation, we developed an original algorithm to detect and remove contaminated radio signals before being fed to the localization algorithm. To improve the localization algorithm, we extended our work with a hybrid based approach that uses both WiFi and GSM interfaces to localize users. For network-based services, we used a software implementation of a LTE base station to develop our algorithms, which characterize the indoor environment before applying the localization algorithm. Experiments were conducted without any special hardware, any prior knowledge of the indoor layout or any offline calibration of the system.

Real-time localization using software defined radio

Service providers make use of cost-effective wireless solutions to identify, localize, and possibly track users using their carried MDs to support added services, such as geo-advertisement, security, and management. Indoor and outdoor hotspot areas play a significant role for such services. However, GPS does not work in many of these areas. To solve this problem, service providers leverage available indoor radio technologies, such as WiFi, GSM, and LTE, to identify and localize users. We focus our research on passive services provided by third parties, which are responsible for (i) data acquisition and (ii) processing, and network-based services, where (i) and (ii) are done inside the serving network. For better understanding of parameters that affect indoor localization, we investigate several factors that affect indoor signal propagation for both Bluetooth and WiFi technologies. For GSM-based passive services, we developed first a data acquisition module: a GSM receiver that can overhear GSM uplink messages transmitted by MDs while being invisible. A set of optimizations were made for the receiver components to support wideband capturing of the GSM spectrum while operating in real-time. Processing the wide-spectrum of the GSM is possible using a proposed distributed processing approach over an IP network. Then, to overcome the lack of information about tracked devices’ radio settings, we developed two novel localization algorithms that rely on proximity-based solutions to estimate in real environments devices’ locations. Given the challenging indoor environment on radio signals, such as NLOS reception and multipath propagation, we developed an original algorithm to detect and remove contaminated radio signals before being fed to the localization algorithm. To improve the localization algorithm, we extended our work with a hybrid based approach that uses both WiFi and GSM interfaces to localize users. For network-based services, we used a software implementation of a LTE base station to develop our algorithms, which characterize the indoor environment before applying the localization algorithm. Experiments were conducted without any special hardware, any prior knowledge of the indoor layout or any offline calibration of the system.

Differential recruitment of brain networks during visuospatial and color processing: Evidence from ERP microstates

Recent functional magnetic resonance imaging (fMRI) studies consistently revealed contributions of fronto-parietal and related networks to the execution of a visuospatial judgment task, the so-called "Clock Task". However, due to the low temporal resolution of fMRI, the exact cortical dynamics and timing of processing during task performance could not be resolved until now. In order to clarify the detailed cortical activity and temporal dynamics, 14 healthy subjects performed an established version of the "Clock Task", which comprises a visuospatial task (angle discrimination) and a control task (color discrimination) with the same stimulus material, in an electroencephalography (EEG) experiment. Based on the time-resolved analysis of network activations (microstate analysis), differences in timing between the angle compared to the color discrimination task were found after sensory processing in a time window starting around 200ms. Significant differences between the two tasks were observed in an analysis window from 192ms to 776ms. We divided this window in two parts: an early phase - from 192ms to ∼440ms, and a late phase - from ∼440ms to 776ms. For both tasks, the order of network activations and the types of networks were the same, but, in each phase, activations for the two conditions were dominated by differing network states with divergent temporal dynamics. Our results provide an important basis for the assessment of deviations in processing dynamics during visuospatial tasks in clinical populations.

Time relevance, citation of reporting guidelines, and breadth of literature search in systematic reviews in orthodontics

INTRODUCTION As the importance of systematic review (SR) conclusions relies upon the scientific rigor of methods and the currency of evidence, we aimed to investigate the currency of orthodontic SRs using as proxy the time from the initial search to publication. Additionally, SR information regarding reporting guidelines, registration, and literature searches were recorded when available. MATERIALS AND METHODS A systematic PubMed search was carried out using the Clinical Queries page to identify orthodontic SRs cited between 1 January 2008 and 7 November 2013. Data related to reporting guidelines, review registration, dates of review processing, literature search, and abstract reporting were retrieved and classified by journal type. Survival analysis was used to assess the time to reach predefined manuscript stages for orthodontic and non-orthodontic journals. RESULTS One hundred twenty seven of the originally identified 585 SRs were considered eligible. The median interval from search until publication was 13.2 months (interquartile range: IQR = 9.7 months) irrespective of the journal type. There was evidence (P = 0.05) that SRs published by non-orthodontic journals appeared in PubMed faster than in orthodontic journals (non-orthodontic: median = 6.5 months; IQR = 5.7 months; orthodontic: median = 10.2 months; IQR = 5.6 months) from submission to publication and from acceptance to publication (non-orthodontic: median = 1.5 months; IQR = 2.4 months; orthodontic: median = 6.0 months; IQR = 6.2 months; P < 0.001). More than half of these SRs did not cite adherence to any reporting guidelines, whereas all but five studies were not prospectively registered. Search of unpublished research was undertaken in approximately 21 per cent and 29 per cent of the SRs published in non-orthodontic and orthodontic periodicals, respectively. CONCLUSIONS This study indicates that SR users should be aware that median time for orthodontic SRs from search to publication is 13.2 months. SRs published in non-orthodontic journals are likely to be more current in terms of submission until time to publication and acceptance until time to publication compared with those published in orthodontic journals.

Linking altered central pain processing and genetic polymorphism to drug efficacy in chronic low back pain.

BACKGROUND Inability to predict the therapeutic effect of a drug in individual pain patients prolongs the process of drug and dose finding until satisfactory pharmacotherapy can be achieved. Many chronic pain conditions are associated with hypersensitivity of the nervous system or impaired endogenous pain modulation. Pharmacotherapy often aims at influencing these disturbed nociceptive processes. Its effect might therefore depend on the extent to which they are altered. Quantitative sensory testing (QST) can evaluate various aspects of pain processing and might therefore be able to predict the analgesic efficacy of a given drug. In the present study three drugs commonly used in the pharmacological management of chronic low back pain are investigated. The primary objective is to examine the ability of QST to predict pain reduction. As a secondary objective, the analgesic effects of these drugs and their effect on QST are evaluated. METHODS/DESIGN In this randomized, double blinded, placebo controlled cross-over study, patients with chronic low back pain are randomly assigned to imipramine, oxycodone or clobazam versus active placebo. QST is assessed at baseline, 1 and 2 h after drug administration. Pain intensity, side effects and patients' global impression of change are assessed in intervals of 30 min up to two hours after drug intake. Baseline QST is used as explanatory variable to predict drug effect. The change in QST over time is analyzed to describe the pharmacodynamic effects of each drug on experimental pain modalities. Genetic polymorphisms are analyzed as co-variables. DISCUSSION Pharmacotherapy is a mainstay in chronic pain treatment. Antidepressants, anticonvulsants and opioids are frequently prescribed in a "trial and error" fashion, without knowledge however, which drug suits best which patient. The present study addresses the important need to translate recent advances in pain research to clinical practice. Assessing the predictive value of central hypersensitivity and endogenous pain modulation could allow for the implementation of a mechanism-based treatment strategy in individual patients. TRIAL REGISTRATION Clinicaltrials.gov, NCT01179828.

Cue Recognition and Integration - Eye Tracking Evidence of Processing Differences in Sentence Comprehension in Aphasia

PURPOSE: We aimed at further elucidating whether aphasic patients' difficulties in understanding non-canonical sentence structures, such as Passive or Object-Verb-Subject sentences, can be attributed to impaired morphosyntactic cue recognition, and to problems in integrating competing interpretations. METHODS: A sentence-picture matching task with canonical and non-canonical spoken sentences was performed using concurrent eye tracking. Accuracy, reaction time, and eye tracking data (fixations) of 50 healthy subjects and 12 aphasic patients were analysed. RESULTS: Patients showed increased error rates and reaction times, as well as delayed fixation preferences for target pictures in non-canonical sentences. Patients' fixation patterns differed from healthy controls and revealed deficits in recognizing and immediately integrating morphosyntactic cues. CONCLUSION: Our study corroborates the notion that difficulties in understanding syntactically complex sentences are attributable to a processing deficit encompassing delayed and therefore impaired recognition and integration of cues, as well as increased competition between interpretations.

Effects of Anxiety on Anticipation and Visual Search in Dynamic, Time-Constrained Situations

We tested the predictions of Attentional Control Theory (ACT) by examining how anxiety affects visual search strategies, performance efficiency, and performance effectiveness using a dynamic, temporal-constrained anticipation task. Higher and lower skilled players viewed soccer situations under 2 task constraints (near vs. far situation) and were tested under high (HA) and low (LA) anxiety conditions. Response accuracy (effectiveness) and response time, perceived mental effort, and eye-movements (all efficiency) were recorded. A significant increase in anxiety was evidenced by higher state anxiety ratings on the MRF-L scale. Increased anxiety led to decreased performance efficiency because response times and mental effort increased for both skill groups whereas response accuracy did not differ. Anxiety influenced search strategies, with higher skilled players showing a decrease in number of fixation locations for far situations under HA compared with LA condition when compared with lower skilled players. Findings provide support for ACT with anxiety impairing processing efficiency and, potentially, top-down attentional control across different task constraints.

Balanced bilinguals favor lexical processing in their opaque language and conversion system in their shallow language

Referred to as orthographic depth, the degree of consistency of grapheme/phoneme correspondences varies across languages from high in shallow orthographies to low in deep orthographies. The present study investigates the impact of orthographic depth on reading route by analyzing evoked potentials to words in a deep (French) and shallow (German) language presented to highly proficient bilinguals. ERP analyses to German and French words revealed significant topographic modulations 240-280ms post-stimulus onset, indicative of distinct brain networks engaged in reading over this time window. Source estimations revealed that these effects stemmed from modulations of left insular, inferior frontal and dorsolateral regions (German>French) previously associated to phonological processing. Our results show that reading in a shallow language was associated to a stronger engagement of phonological pathways than reading in a deep language. Thus, the lexical pathways favored in word reading are reinforced by phonological networks more strongly in the shallow than deep orthography.

Time-Efficiency Analysis Comparing Digital and Conventional Workflows for Implant Crowns: A Prospective Clinical Crossover Trial

PURPOSE To compare time-efficiency in the production of implant crowns using a digital workflow versus the conventional pathway. MATERIALS AND METHODS This prospective clinical study used a crossover design that included 20 study participants receiving single-tooth replacements in posterior sites. Each patient received a customized titanium abutment plus a computer-aided design/computer-assisted manufacture (CAD/CAM) zirconia suprastructure (for those in the test group, using digital workflow) and a standardized titanium abutment plus a porcelain-fused-to-metal crown (for those in the control group, using a conventional pathway). The start of the implant prosthetic treatment was established as the baseline. Time-efficiency analysis was defined as the primary outcome, and was measured for every single clinical and laboratory work step in minutes. Statistical analysis was calculated with the Wilcoxon rank sum test. RESULTS All crowns could be provided within two clinical appointments, independent of the manufacturing process. The mean total production time, as the sum of clinical plus laboratory work steps, was significantly different. The mean ± standard deviation (SD) time was 185.4 ± 17.9 minutes for the digital workflow process and 223.0 ± 26.2 minutes for the conventional pathway (P = .0001). Therefore, digital processing for overall treatment was 16% faster. Detailed analysis for the clinical treatment revealed a significantly reduced mean ± SD chair time of 27.3 ± 3.4 minutes for the test group compared with 33.2 ± 4.9 minutes for the control group (P = .0001). Similar results were found for the mean laboratory work time, with a significant decrease of 158.1 ± 17.2 minutes for the test group vs 189.8 ± 25.3 minutes for the control group (P = .0001). CONCLUSION Only a few studies have investigated efficiency parameters of digital workflows compared with conventional pathways in implant dental medicine. This investigation shows that the digital workflow seems to be more time-efficient than the established conventional production pathway for fixed implant-supported crowns. Both clinical chair time and laboratory manufacturing steps could be effectively shortened with the digital process of intraoral scanning plus CAD/CAM technology.