Linking Landscape Protection and Nature Conservation: Switzerland’s Experience with Protected Mire Landscapes

Since 1987, Switzerland’s Federal Inventory of Mire Landscapes of Particular Beauty and National Importance has provided an instrument for the integration of nature conservation and landscape protection. Mires and mire landscape protection are strictly regulated. However, research results show that neither the goals of mire protection nor those of mire landscape protection are being achieved. The reasons for this are manifold and, in particular, have to do with a lack of coordination between the various policy areas that shape mire environments and mire landscapes. There are several key challenges involving different political and administrative levels. At the national level, mechanisms must be devised that enable differentiated regional implementation of national sectoral policies. In the context of cantonal structure planning, regional nature conservation and landscape protection priorities should be established based on existing regional potentials vis-à-vis the natural environment and landscapes (including protected biotopes and landscapes). At the regional level (spanning multiple communes), integrated planning instruments and governance structures should be developed so that implementation of national and cantonal sectoral policies may be harmonized under the umbrella of regional and integrated development plans. These adjustments to Switzerland’s institutional system are necessary to enable far-reaching integration of nature conservation and landscape protection when setting regional policy priorities. This would strengthen the protection of mire landscapes and other integrative instruments such as regional nature parks of national importance.

Complexity and non-linearity in earth surface processes - concepts, methods and applications

Complexity has long been recognized and is increasingly becoming mainstream in geomorphology. However, the relative novelty of various concepts and techniques associated to it means that ambiguity continues to surround complexity. In this commentary, we present and discuss a variety of recent contributions that have the potential to help clarify issues and advance the use of complexity in geomorphology.

Current State of Reporting Pain Outcomes in Cochrane Reviews of Chronic Musculoskeletal Pain Conditions and Considerations for an OMERACT Research Agenda.

OBJECTIVE To assess the current state of reporting of pain outcomes in Cochrane reviews on chronic musculoskeletal painful conditions and to elicit opinions of patients, healthcare practitioners, and methodologists on presenting pain outcomes to patients, clinicians, and policymakers. METHODS We identified all reviews in the Cochrane Library of chronic musculoskeletal pain conditions from Cochrane review groups (Back, Musculoskeletal, and Pain, Palliative, and Supportive Care) that contained a summary of findings (SoF) table. We extracted data on reported pain domains and instruments and conducted a survey and interviews on considerations for SoF tables (e.g., pain domains, presentation of results). RESULTS Fifty-seven SoF tables in 133 Cochrane reviews were eligible. SoF tables reported pain in 56/57, with all presenting results for pain intensity (20 different outcome instruments), pain interference in 8 SoF tables (5 different outcome instruments), and pain frequency in 1 multiple domain instrument. Other domains like pain quality or pain affect were not reported. From the survey and interviews [response rate 80% (36/45)], we derived 4 themes for a future research agenda: pain domains, considerations for assessing truth, discrimination, and feasibility; clinically important thresholds for responder analyses and presenting results; and establishing hierarchies of outcome instruments. CONCLUSION There is a lack of standardization in the domains of pain selected and the manner that pain outcomes are reported in SoF tables, hampering efforts to synthesize evidence. Future research should focus on the themes identified, building partnerships to achieve consensus and develop guidance on best practices for reporting pain outcomes.

Development of a method for fast and automatic radiocarbon measurement of aerosol samples by online coupling of an elemental analyzer with a MICADAS AMS

A fast and automatic method for radiocarbon analysis of aerosol samples is presented. This type of analysis requires high number of sample measurements of low carbon masses, but accepts precisions lower than for carbon dating analysis. The method is based on online Trapping CO2 and coupling an elemental analyzer with a MICADAS AMS by means of a gas interface. It gives similar results to a previously validated reference method for the same set of samples. This method is fast and automatic and typically provides uncertainties of 1.5–5% for representative aerosol samples. It proves to be robust and reliable and allows for overnight and unattended measurements. A constant and cross contamination correction is included, which indicates a constant contamination of 1.4 ± 0.2 μg C with 70 ± 7 pMC and a cross contamination of (0.2 ± 0.1)% from the previous sample. A Real-time online coupling version of the method was also investigated. It shows promising results for standard materials with slightly higher uncertainties than the Trapping online approach.

Mechanical restoration and failure analyses of a hydrogel and scaffold composite strategy for annulus fibrosus repair

Unrepaired defects in the annulus fibrosus of intervertebral disks are associated with degeneration and persistent back pain. A clinical need exists for a disk repair strategy that can seal annular defects, be easily delivered during surgical procedures, and restore biomechanics with low risk of herniation. Multiple annulus repair strategies were developed using poly(trimethylene carbonate) scaffolds optimized for cell delivery, polyurethane membranes designed to prevent herniation, and fibrin-genipin adhesive tuned to annulus fibrosus shear properties. This three-part study evaluated repair strategies for biomechanical restoration, herniation risk and failure mode in torsion, bending and compression at physiological and hyper-physiological loads using a bovine injury model. Fibrin-genipin hydrogel restored some torsional stiffness, bending ROM and disk height loss, with negligible herniation risk and failure was observed histologically at the fibrin-genipin mid-substance following rigorous loading. Scaffold-based repairs partially restored biomechanics, but had high herniation risk even when stabilized with sutured membranes and failure was observed histologically at the interface between scaffold and fibrin-genipin adhesive. Fibrin-genipin was the simplest annulus fibrosus repair solution evaluated that involved an easily deliverable adhesive that filled irregularly-shaped annular defects and partially restored disk biomechanics with low herniation risk, suggesting further evaluation for disk repair may be warranted. Statement of significance Lower back pain is the leading cause of global disability and commonly caused by defects and failure of intervertebral disk tissues resulting in herniation and compression of adjacent nerves. Annulus fibrosus repair materials and techniques have not been successful due to the challenging mechanical and chemical microenvironment and the needs to restore biomechanical behaviors and promote healing with negligible herniation risk while being delivered during surgical procedures. This work addressed this challenging biomaterial and clinical problem using novel materials including an adhesive hydrogel, a scaffold capable of cell delivery, and a membrane to prevent herniation. Composite repair strategies were evaluated and optimized in quantitative three-part study that rigorously evaluated disk repair and provided a framework for evaluating alternate repair techniques.

Gaseous radiocarbon measurements of small samples

Radiocarbon dating by means of accelerator mass spectrometry (AMS) is a well-established method for samples containing carbon in the milligram range. However, the measurement of small samples containing less than 50 lg carbon often fails. It is difficult to graphitise these samples and the preparation is prone to contamination. To avoid graphitisation, a solution can be the direct measurement of carbon dioxide. The MICADAS, the smallest accelerator for radiocarbon dating in Zurich, is equipped with a hybrid Cs sputter ion source. It allows the measurement of both, graphite targets and gaseous CO2 samples, without any rebuilding. This work presents experiences dealing with small samples containing 1-40 lg carbon. 500 unknown samples of different environmental research fields have been measured yet. Most of the samples were measured with the gas ion source. These data are compared with earlier measurements of small graphite samples. The performance of the two different techniques is discussed and main contributions to the blank determined. An analysis of blank and standard data measured within years allowed a quantification of the contamination, which was found to be of the order of 55 ng and 750 ng carbon (50 pMC) for the gaseous and the graphite samples, respectively. For quality control, a number of certified standards were measured using the gas ion source to demonstrate reliability of the data.

129I/127I ratios and 129I concentrations in a recent sea sediment core and in rainwater from Sevilla (Spain) by AMS

In spite of the environmental relevance of 129I, there is still a scarcity of data about its presence in the different natural compartments. In this work, results are presented on the concentration of 129I in rainwater samples taken in Sevilla (southwestern Spain) and in a sediment core taken near the Ringhals coast (Sweden). Typical concentrations of 108 and 109129I at/l are found in rainwater samples, similar to other values in literature. In the case of the sediment core, our results clearly show the impact of anthropogenic sources, with concentrations in the order of 1013129I at./kg and isotopic ratios 129I/127I in the order of 10−8 in the higher layers.

Iodine-129: Sample preparation, quality control and analyses of pre-nuclear materials and of natural waters from Lower Saxony, Germany

Sample preparation procedures for AMS measurements of 129I and 127I in environmental materials and some methodological aspects of quality assurance are discussed. Measurements from analyses of some pre-nuclear soil and thyroid gland samples and of a systematic investigation of natural waters in Lower Saxony, Germany, are described. Although the up-to-now lowest 129I/127I ratios in soils and thyroid glands were observed, they are still suspect to contamination since they are significantly higher than the pre-nuclear equilibrium ratio in the marine hydrosphere. A survey on all available 129I/127I isotopic ratios in precipitation shows a dramatic increase until the middle of the 1980s and a stabilization since 1987 at high isotopic ratios of about (3.6–8.3)×10−7. In surface waters, ratios of (57–380)×10−10 are measured while shallow ground waters show with ratios of (1.3–200)×10−10 significantly lower values with a much larger spread. The data for 129I in soils and in precipitation are used to estimate pre-nuclear and modern 129I deposition densities.

Fertility-preservation counselling and treatment for medical reasons: data from a multinational network of over 5000 women.

Fertility-preservation techniques for medical reasons are increasingly offered in national networks. Knowledge of the characteristics of counselled patients and techniques used are essential. The FertiPROTEKT network registry was analysed between 2007 and 2013, and included up to 85 university and non-university centres in Germany, Austria and Switzerland; 5159 women were counselled and 4060 women underwent fertility preservation. In 2013, fertility-preservation counselling for medical reasons increased significantly among nullipara and women aged between 21 and 35 years (n = 1043; P < 0.001). Frequency of GnRH applications slowly decreased, whereas tissue, oocytes and zygote cryopreservation increased. In 2013, women with breast cancer mainly opted for tissue freezing, whereas women with lymphoma opted for GnRH agonist. Women younger than 20 years predominantly opted for GnRH agonists and ovarian tissue cryopreservation; women aged between 20 and 40 years underwent a variety of techniques; and women over 40 years opted for GnRH agonists. The average number of aspirated oocytes per stimulation cycle decreased as age increased (< 30 years: 12.9; 31-35 years: 12.3; 36-46: 9.0; > 41 years: 5.7). For ovarian tissue cryopreservation, removal and cryopreservation of fewer than one ovary was preferred and carried out in 97% of cases in 2013.

Professionalisation of sport federations – A multi-level framework for analysing forms, causes and consequences

Research question: International and national sport federations as well as their member organisations are key actors within the sport system and have a wide range of relationships outside the sport system (e.g. with the state, sponsors, and the media). They are currently facing major challenges such as growing competition in top-level sports, democratisation of sports with ‘sports for all’ and sports as the answer to social problems. In this context, professionalising sport organisations seems to be an appropriate strategy to face these challenges and current problems. We define the professionalisation of sport organisations as an organisational process of transformation leading towards organisational rationalisation, efficiency and business-like management. This has led to a profound organisational change, particularly within sport federations, characterised by the strengthening of institutional management (managerialism) and the implementation of efficiency-based management instruments and paid staff. Research methods: The goal of this article is to review the current international literature and establish a global understanding of and theoretical framework for analysing why and how sport organisations professionalise and what consequences this may have. Results and findings: Our multi-level approach based on the social theory of action integrates the current concepts for analysing professionalisation in sport federations. We specify the framework for the following research perspectives: (1) forms, (2) causes and (3) consequences, and discuss the reciprocal relations between sport federations and their member organisations in this context. Implications: Finally, we work out a research agenda and derive general methodological consequences for the investigation of professionalisation processes in sport organisations.

Professionalisation of sports federations – A multi-level framework for analysing forms, causes and consequences

Introduction: International and national sports federations as well as their member organisations (usually sports clubs) are key actors within the sports system and have a wide range of relationships outside the sports system (e.g. with the state, sponsors, and the media). They are currently facing major challenges such as growing competition in top-­‐level sports, democratisation of sports with “sports for all” and sports as the answer to social problems (integration, education, health, unemployment, etc.). In this context, professionalising sports organisations seems to be an appropriate strategy to face these challenges and solve current problems. This has led to a profound organisational change, particularly within sports federations, characterised by the strengthening of institutional management (managerialism) and the implementation of efficiency-­‐based management instruments and paid staff. In this context the questions arise how sports organisations professionalise and what consequences this may have. Theoretical framework: The goal of our presentation is to review the international literature and develop an appropriate concept of professionalisation in sport federations. Our multi-­‐level approach based on social theory of action integrates the current concepts and perspectives for analysing professionalisation in sports federations. We specify the framework for the following research perspectives: (1) forms, (2) causes and mechanisms, (3) consequences and (4) dynamics, and discuss the reciprocal relations between sports federations and their member organisations in this context. When analysing these different research perspectives, it is important to select or elaborate appropriate theoretical concepts to match the general multi-­‐level framework Discussion: The elaborated multi-­‐level framework for analysing professionalisation in sports federations is able to integrate most of the existing theoretical concepts and therefore, the broad range of endogenous as well as exogenous factors that might influence the professionalisation of sports organisations. Based on the theoretical framework, we can identify several consequences for the methodological design of studies intending to analyse the different perspectives of professionalisation in sports organisations: Data have to be collected on the different levels. Not only the forms of professionalisation and relevant structures of the organisations should be taken into account but also important characteristics of the environment (macro level) as well as members or member organisations, particularly key actors who might play a crucial role in gaining an understanding of professionalisation processes in sports organisations. In order to carry out a complex organisational research design, it seems necessary to focus on case studies – an approach that has become increasingly important in organisational research. Different strategies and methods of data collection have to be used within the case studies (e.g. interviews with experts within the organisations, questionnaire for selected people in the organisation, document analysis). Therefore, qualitative and quantitative research strategies have to be combined.

Chemical Composition of Micrometer-Sized Filaments in an Aragonite Host by a Miniature Laser Ablation/Ionization Mass Spectrometer

Detection of extraterrestrial life is an ongoing goal in space exploration, and there is a need for advanced instruments and methods for the detection of signatures of life based on chemical and isotopic composition. Here, we present the first investigation of chemical composition of putative microfossils in natural samples using a miniature laser ablation/ionization time-of-flight mass spectrometer (LMS). The studies were conducted with high lateral (similar to 15 mu m) and vertical (similar to 20-200 nm) resolution. The primary aim of the study was to investigate the instrument performance on micrometer-sized samples both in terms of isotope abundance and element composition. The following objectives had to be achieved: (1) Consider the detection and calculation of single stable isotope ratios in natural rock samples with techniques compatible with their employment of space instrumentation for biomarker detection in future planetary missions. (2) Achieve a highly accurate chemical compositional map of rock samples with embedded structures at the micrometer scale in which the rock matrix is easily distinguished from the micrometer structures. Our results indicate that chemical mapping of strongly heterogeneous rock samples can be obtained with a high accuracy, whereas the requirements for isotope ratios need to be improved to reach sufficiently large signal-to-noise ratio (SNR). Key Words: Biogenicity-Biomarkers-Biosignatures-Filaments-Fossilization. Astrobiology 15, 669-682.

Positron bunching and electrostatic transport system for the production and emission of dense positronium clouds into vacuum

We describe a system designed to re-bunch positron pulses delivered by an accumulator supplied by a positron source and a Surko-trap. Positron pulses from the accumulator are magnetically guided in a 0.085 T field and are injected into a region free of magnetic fields through a μ -metal field terminator. Here positrons are temporally compressed, electrostatically guided and accelerated towards a porous silicon target for the production and emission of positronium into vacuum. Positrons are focused in a spot of less than 4 mm FWTM in bunches of ∼8 ns FWHM. Emission of positronium into the vacuum is shown by single shot positron annihilation lifetime spectroscopy.