28 resultados para costs of production
Resumo:
Spectra of K0S mesons and Λ hyperons were measured in p+C interactions at 31 GeV/c with the large acceptance NA61/SHINE spectrometer at the CERN SPS. The data were collected with an isotropic graphite target with a thickness of 4% of a nuclear interaction length. Interaction cross sections, charged pion spectra, and charged kaon spectra were previously measured using the same data set. Results on K0S and Λ production in p+C interactions serve as reference for the understanding of the enhancement of strangeness production in nucleus-nucleus collisions. Moreover, they provide important input for the improvement of neutrino flux predictions for the T2K long baseline neutrino oscillation experiment in Japan. Inclusive production cross sections for K0S and Λ are presented as a function of laboratory momentum in intervals of the laboratory polar angle covering the range from 0 up to 240 mrad. The results are compared with predictions of several hadron production models. The K0S mean multiplicity in production processes
Resumo:
A measurement of the ZZ production cross section in proton-proton collisions at root s = 7 TeV using data recorded by the ATLAS experiment at the Large Hadron Collider is presented. In a data sample corresponding to an integrated luminosity of 4.6 fb(-1) collected in 2011, events are selected that are consistent either with two Z bosons decaying to electrons or muons or with one Z boson decaying to electrons or muons and a second Z boson decaying to neutrinos. The ZZ((*)) -> l(+)l(-)l'(+)l'(-) and ZZ -> l(+)l(-) nu(nu) over bar cross sections are measured in restricted phase-space regions. These results are then used to derive the total cross section for ZZ events produced with both Z bosons in the mass range 66 to 116 GeV, sigma(tot)(ZZ) = 6.7 +/- 0.7 (stat.) (+0.4)(-0.3) (syst.) +/- 0.3 (lumi.) pb, which is consistent with the Standard Model prediction of 5.89(-0.18)(+0.22) pb calculated at next-to-leading order in QCD. The normalized differential cross sections in bins of various kinematic variables are presented. Finally, the differential event yield as a function of the transverse momentum of the leading Z boson is used to set limits on anomalous neutral triple gauge boson couplings in ZZ production.
Resumo:
Children typically hold very optimistic views of their own skills but so far, only a few studies have investigated possible correlates of the ability to predict performance accurately. Therefore, this study examined the role of individual differences in performance estimation accuracy as a global metacognitive index for different monitoring and control skills (item-level judgments of learning [JOLs] and confidence judgments [CJs]), metacognitive control processes (allocation of study time and control of answers), and executive functions (cognitive flexibility, inhibition, working memory) in 6-year-olds (N=93). The three groups of under estimators, realists and over estimators differed significantly in their monitoring and control abilities: the under estimators outperformed the over estimators by showing a higher discrimination in CJs between correct and incorrect recognition. Also, the under estimators scored higher on the adequate control of incorrectly recognized items. Regarding the interplay of monitoring and control processes, under estimators spent more time studying items with low JOLs, and relied more systematically on their monitoring when controlling their recognition compared to over estimators. At the same time, the three groups did not differ significantly from each other in their executive functions. Overall, results indicate that differences in performance estimation accuracy are systematically related to other global and item-level metacognitive monitoring and control abilities in children as young as six years of age, while no meaningful association between performance estimation accuracy and executive functions was found.
Resumo:
Perceived profitability is a key factor in explaining farmers' decision to adopt or not adopt sustainable land management (SLM) technologies. Despite this importance, relatively little is known about the economics of SLM. This paper contributes to the literature by analysing data on costs and perceived cost/benefit ratios of SLM technologies. Data are taken from the World Overview of Conservation Approaches and Technologies technology database and cover 363 case studies conducted in a variety of countries between 1990 and 2012. Based on an in-depth descriptive analysis, we determine what costs accrue to local stakeholders and assess perceived short-term and long-term cost/benefit ratios. Our results show that a large majority of the technologies in our sample are perceived as being profitable: 73% were perceived to have a positive or at least neutral cost/benefit ratio in the short term, while 97% were perceived to have a positive or very positive cost/benefit ratio in the long term. An additional empirical analysis confirms that economic factors are key determinants of land users' decisions to adopt or not adopt SLM technologies. We conclude that a wide range of existing SLM practices generate considerable benefits not only for land users, but for other stakeholders as well. High initial investment costs associated with some practices may, however, constitute a barrier to their adoption; short-term support for land users can help to promote these practices where appropriate.
Resumo:
Background Plastic root-foraging responses have been widely recognized as an important strategy for plants to explore heterogeneously distributed resources. However, the benefits and costs of root foraging have received little attention. Methodology/Principal Findings In a greenhouse experiment, we grew pairs of connected ramets of 22 genotypes of the stoloniferous plant Potentilla reptans in paired pots, between which the contrast in nutrient availability was set as null, medium and high, but with the total nutrient amount kept the same. We calculated root-foraging intensity of each individual ramet pair as the difference in root mass between paired ramets divided by the total root mass. For each genotype, we then calculated root-foraging ability as the slope of the regression of root-foraging intensity against patch contrast. For all genotypes, root-foraging intensity increased with patch contrast and the total biomass and number of offspring ramets were lowest at high patch contrast. Among genotypes, root-foraging intensity was positively related to production of offspring ramets and biomass in the high patch-contrast treatment, which indicates an evolutionary benefit of root foraging in heterogeneous environments. However, we found no significant evidence that the ability of plastic foraging imposes costs under homogeneous conditions (i.e. when foraging is not needed). Conclusions/Significance Our results show that plants of P. reptans adjust their root-foraging intensity according to patch contrast. Moreover, the results show that the root foraging has an evolutionary advantage in heterogeneous environments, while costs of having the ability of plastic root foraging were absent or very small.
Resumo:
In process industries, make-and-pack production is used to produce food and beverages, chemicals, and metal products, among others. This type of production process allows the fabrication of a wide range of products in relatively small amounts using the same equipment. In this article, we consider a real-world production process (cf. Honkomp et al. 2000. The curse of reality – why process scheduling optimization problems are diffcult in practice. Computers & Chemical Engineering, 24, 323–328.) comprising sequence-dependent changeover times, multipurpose storage units with limited capacities, quarantine times, batch splitting, partial equipment connectivity, and transfer times. The planning problem consists of computing a production schedule such that a given demand of packed products is fulfilled, all technological constraints are satisfied, and the production makespan is minimised. None of the models in the literature covers all of the technological constraints that occur in such make-and-pack production processes. To close this gap, we develop an efficient mixed-integer linear programming model that is based on a continuous time domain and general-precedence variables. We propose novel types of symmetry-breaking constraints and a preprocessing procedure to improve the model performance. In an experimental analysis, we show that small- and moderate-sized instances can be solved to optimality within short CPU times.
Resumo:
Measurements are presented of production properties and couplings of the recently discovered Higgs boson using the decays into boson pairs, H --> gamma-gamma, H --> ZZ* --> 4 leptons and H --> WW --> 2 leptons + 2 neutrinos. The results are based on the complete pp collision data sample recorded by the ATLAS experiment at the CERN Large Hadron Collider at centre-of-mass energies of 7 TeV and 8 TeV, corresponding to an integrated luminosity of about 25/fb. Evidence for Higgs boson production through vector-boson fusion is reported. Results of combined fits probing Higgs boson couplings to fermions and bosons, as well as anomalous contributions to loop-induced production and decay modes, are presented. All measurements are consistent with expectations for the Standard Model Higgs boson.
Resumo:
We study a real-world scheduling problem arising in the context of a rolling ingots production. First we review the production process and discuss peculiarities that have to be observed when scheduling a given set of production orders on the production facilities. We then show how to model this scheduling problem using prescribed time lags between operations, different kinds of resources, and sequence-dependent changeovers. A branch-and-bound solution procedure is presented in the second part. The basic principle is to relax the resource constraints by assuming infinite resource availability. Resulting resource conflicts are then stepwise resolved by introducing precedence relationships among operations competing for the same resources. The algorithm has been implemented as a beam search heuristic enumerating alternative sets of precedence relationships.
Resumo:
Background The usefulness and modalities of cardiovascular screening in young athletes remain controversial, particularly concerning the role of 12-lead ECG. One of the reasons refers to the presumed false-positive ECGs requiring additional examinations and higher costs. Our study aimed to assess the total costs and yield of a preparticipation cardiovascular examination with ECG in young athletes in Switzerland. Methods Athletes aged 14–35 years were examined according to the 2005 European Society of Cardiology (ESC) protocol. ECGs were interpreted based on the 2010 ESC-adapted recommendations. The costs of the overall screening programme until diagnosis were calculated according to Swiss medical rates. Results A total of 1070 athletes were examined (75% men, 19.7±6.3 years) over a 15-month period. Among them, 67 (6.3%) required further examinations: 14 (1.3%) due to medical history, 15 (1.4%) due to physical examination and 42 (3.9%) because of abnormal ECG findings. A previously unknown cardiac abnormality was established in 11 athletes (1.0%). In four athletes (0.4%), the abnormality may potentially lead to sudden cardiac death and all of them were identified by ECG alone. The cost was 157 464 Swiss francs (CHF) for the overall programme, CHF147 per athlete and CHF14 315 per finding. Conclusions Cardiovascular preparticipation examination in young athletes using modern and athlete-specific criteria for interpreting ECG is feasible in Switzerland at reasonable cost. ECG alone is used to detect all potentially lethal cardiac diseases. The results of our study support the inclusion of ECG in routine preparticipation screening.
Resumo:
The endocannabinoid system (ECS) comprises the cannabinoid receptors CB1 and CB2 and their endogenous arachidonic acid-derived agonists 2-arachidonoyl glycerol and anandamide, which play important neuromodulatory roles. Recently, a novel class of negative allosteric CB1 receptor peptide ligands, hemopressin-like peptides derived from alpha hemoglobin, has been described, with yet unknown origin and function in the CNS. Using monoclonal antibodies we now identified the localization of RVD-hemopressin (pepcan-12) and N-terminally extended peptide endocannabinoids (pepcans) in the CNS and determined their neuronal origin. Immunohistochemical analyses in rodents revealed distinctive and specific staining in major groups of noradrenergic neurons, including the locus coeruleus (LC), A1, A5 and A7 neurons, which appear to be major sites of production/release in the CNS. No staining was detected in dopaminergic neurons. Peptidergic axons were seen throughout the brain (notably hippocampus and cerebral cortex) and spinal cord, indicative of anterograde axonal transport of pepcans. Intriguingly, the chromaffin cells in the adrenal medulla were also strongly stained for pepcans. We found specific co-expression of pepcans with galanin, both in the LC and adrenal gland. Using LC-MS/MS, pepcan-12 was only detected in non-perfused brain (∼40 pmol/g), suggesting that in the CNS it is secreted and present in extracellular compartments. In adrenal glands, significantly more pepcan-12 (400-700 pmol/g) was measured in both non-perfused and perfused tissue. Thus, chromaffin cells may be a major production site of pepcan-12 found in blood. These data uncover important areas of peptide endocannabinoid occurrence with exclusive noradrenergic immunohistochemical staining, opening new doors to investigate their potential physiological function in the ECS. This article is part of a Special Issue entitled 'Fluorescent Neuro-Ligands'.
Resumo:
BACKGROUND Estimating the prevalence of comorbidities and their associated costs in patients with diabetes is fundamental to optimizing health care management. This study assesses the prevalence and health care costs of comorbid conditions among patients with diabetes compared with patients without diabetes. Distinguishing potentially diabetes- and nondiabetes-related comorbidities in patients with diabetes, we also determined the most frequent chronic conditions and estimated their effect on costs across different health care settings in Switzerland. METHODS Using health care claims data from 2011, we calculated the prevalence and average health care costs of comorbidities among patients with and without diabetes in inpatient and outpatient settings. Patients with diabetes and comorbid conditions were identified using pharmacy-based cost groups. Generalized linear models with negative binomial distribution were used to analyze the effect of comorbidities on health care costs. RESULTS A total of 932,612 persons, including 50,751 patients with diabetes, were enrolled. The most frequent potentially diabetes- and nondiabetes-related comorbidities in patients older than 64 years were cardiovascular diseases (91%), rheumatologic conditions (55%), and hyperlipidemia (53%). The mean total health care costs for diabetes patients varied substantially by comorbidity status (US$3,203-$14,223). Patients with diabetes and more than two comorbidities incurred US$10,584 higher total costs than patients without comorbidity. Costs were significantly higher in patients with diabetes and comorbid cardiovascular disease (US$4,788), hyperlipidemia (US$2,163), hyperacidity disorders (US$8,753), and pain (US$8,324) compared with in those without the given disease. CONCLUSION Comorbidities in patients with diabetes are highly prevalent and have substantial consequences for medical expenditures. Interestingly, hyperacidity disorders and pain were the most costly conditions. Our findings highlight the importance of developing strategies that meet the needs of patients with diabetes and comorbidities. Integrated diabetes care such as used in the Chronic Care Model may represent a useful strategy.
Resumo:
The question concerning the circumstances under which it is advantageous for a company to outsource certain information systems functions has been a controversial issue for the last decade. While opponents emphasize the risks of outsourcing based on the loss of strategic potentials and increased transaction costs, proponents emphasize the strategic benefits of outsourcing and high potentials of cost-savings. This paper brings together both views by examining the conditions under which both the strategic potentials as well as savings in production and transaction costs of developing and maintaining software applications can better be achieved in-house as opposed to by an external vendor. We develop a theoretical framework from three complementary theories and test it empirically based on a mail survey of 139 German companies. The results show that insourcing is more cost efficient and advantageous in creating strategic benefits through IS if the provision of application services requires a high amount of firm specific human assets. These relationships, however, are partially moderated by differences in the trustworthiness and intrinsic motivation of internal versus external IS professionals. Moreover, capital shares with an external vendor can lower the risk of high transaction costs as well the risk of loosing the strategic opportunities of an IS.