Recommendations for the use of ultrasound in rheumatoid arthritis: literature review and SONAR score experience

Ultrasound (US) has become a useful tool in the detection of early disease, differential diagnosis, guidance of treatment decisions and treatment monitoring of rheumatoid arthritis (RA). In 2008, the Swiss Sonography in Arthritis and Rheumatism (SONAR) group was established to promote the use of US in inflammatory arthritis in clinical practice. A scoring system was developed and taught to a large number of Swiss rheumatologists who already contributed to the Swiss Clinical Quality Management (SCQM) database, a national patient register. This paper intends to give a Swiss consensus about best clinical practice recommendations for the use of US in RA on the basis of the current literature knowledge and experience with the Swiss SONAR score. Literature research was performed to collect data on current evidence. The results were discussed among specialists of the Swiss university centres and private practice, following a structured procedure. Musculoskelatal US was found to be very helpful in establishing the diagnosis and monitoring the evolution of RA, and to be a reliable tool if used by experienced examiners. It influences treatment decisions such as continuing, intensifying or stepping down therapy. The definite modalities of integrating US into the diagnosis and monitoring of RA treatments will be defined within a few years. There are, however, strong arguments to use US findings as of today in daily clinical care. Some practical recommendations about the use of US in RA, focusing on the diagnosis and the use of the SONAR score, are proposed.

Use of audiovisual messages from land user to land user for sharing knowledge about SLM: experiences from a pilot project in Kenya and Tajikistan

The global World Overview of Conservation Approaches and Technologies (WOCAT) initiative has developed standardised tools and methods to compile and evaluate knowledge available about SLM. This knowledge is now combined and enriched with audiovisual information in order to give a voice to land users, reach a broad range of stakeholders, and assist in scaling up SLM to reverse trends of degradation, desertification, and drought. Five video products, adapted to the needs of different target groups, are created and embedded in already existing platforms for knowledge sharing of SLM such as the WOCAT database and Google Earth application. A pilot project was carried out in Kenya and Tajikistan to verify ideas and tools while at the same time assessing the usefulness of the suggested products on the ground. Video has the potential to bridge the gap between different actor groups and enable communication and sharing on different levels and scales: locally, regionally, and globally. Furthermore, it is an innovative tool to link local and scientific knowledge, raise awareness, and support advocacy for SLM. Keywords: Sustainable Land Management (SLM), knowledge sharing, audiovisual messages, video, World Overview of Conservation Approaches and Technologies (WOCAT)

Use of multi-media for spreading the experiences

The global World Overview of Conservation Approaches and Technologies (WOCAT) initiative has developed standardised tools and methods to compile and evaluate knowledge available about SLM. This knowledge is now combined and enriched with audiovisual information in order to give a voice to land users, reach a broad range of stakeholders, and assist in scaling up SLM to reverse trends of degradation, desertification, and drought. Five video products, adapted to the needs of different target groups, are created and embedded in already existing platforms for knowledge sharing of SLM such as the WOCAT database and Google Earth application. A pilot project was carried out in Kenya and Tajikistan to verify ideas and tools while at the same time assessing the usefulness of the suggested products on the ground. Video has the potential to bridge the gap between different actor groups and enable communication and sharing on different levels and scales: locally, regionally, and globally. Furthermore, it is an innovative tool to link local and scientific knowledge, raise awareness, and support advocacy for SLM.

Does Radar Technology Support the Diagnosis of Pneumothorax? PneumoScan-A Diagnostic Point-of-Care Tool

Background. A nonrecognized pneumothorax (PTX) may become a life-threatening tension PTX. A reliable point-of-care diagnostic tool could help in reduce this risk. For this purpose, we investigated the feasibility of the use of the PneumoScan, an innovative device based on micropower impulse radar (MIR). Patients and Methods. addition to a standard diagnostic protocol including clinical examination, chest X-ray (CXR), and computed tomography (CT), 24 consecutive patients with chest trauma underwent PneumoScan testing in the shock trauma room to exclude a PTX. Results. The application of the PneumoScan was simple, quick, and reliable without functional disorder. Clinical examination and CXR each revealed one and PneumoScan three out of altogether four PTXs (sensitivity 75%, specificity 100%, positive predictive value 100%, and negative predictive value 95%). The undetected PTX did not require intervention. Conclusion. The PneumoScan as a point-of-care device offers additional diagnostic value in patient management following chest trauma. Further studies with more patients have to be performed to evaluate the diagnostic accuracy of the device.

Development, implementation, and evaluation of a structured reporting web tool for abdominal aortic aneurysms

BACKGROUND The majority of radiological reports are lacking a standard structure. Even within a specialized area of radiology, each report has its individual structure with regards to details and order, often containing too much of non-relevant information the referring physician is not interested in. For gathering relevant clinical key parameters in an efficient way or to support long-term therapy monitoring, structured reporting might be advantageous. OBJECTIVE Despite of new technologies in medical information systems, medical reporting is still not dynamic. To improve the quality of communication in radiology reports, a new structured reporting system was developed for abdominal aortic aneurysms (AAA), intended to enhance professional communication by providing the pertinent clinical information in a predefined standard. METHODS Actual state analysis was performed within the departments of radiology and vascular surgery by developing a Technology Acceptance Model. The SWOT (strengths, weaknesses, opportunities, and threats) analysis focused on optimization of the radiology reporting of patients with AAA. Definition of clinical parameters was achieved by interviewing experienced clinicians in radiology and vascular surgery. For evaluation, a focus group (4 radiologists) looked at the reports of 16 patients. The usability and reliability of the method was validated in a real-world test environment in the field of radiology. RESULTS A Web-based application for radiological "structured reporting" (SR) was successfully standardized for AAA. Its organization comprises three main categories: characteristics of pathology and adjacent anatomy, measurements, and additional findings. Using different graphical widgets (eg, drop-down menus) in each category facilitate predefined data entries. Measurement parameters shown in a diagram can be defined for clinical monitoring and be adducted for quick adjudications. Figures for optional use to guide and standardize the reporting are embedded. Analysis of variance shows decreased average time required with SR to obtain a radiological report compared to free-text reporting (P=.0001). Questionnaire responses confirm a high acceptance rate by the user. CONCLUSIONS The new SR system may support efficient radiological reporting for initial diagnosis and follow-up for AAA. Perceived advantages of our SR platform are ease of use, which may lead to more accurate decision support. The new system is open to communicate not only with clinical partners but also with Radiology Information and Hospital Information Systems.

Effect of standardized training on the reliability of the Cochrane risk of bias assessment tool: a study protocol

BACKGROUND The Cochrane risk of bias (RoB) tool has been widely embraced by the systematic review community, but several studies have reported that its reliability is low. We aim to investigate whether training of raters, including objective and standardized instructions on how to assess risk of bias, can improve the reliability of this tool. We describe the methods that will be used in this investigation and present an intensive standardized training package for risk of bias assessment that could be used by contributors to the Cochrane Collaboration and other reviewers. METHODS/DESIGN This is a pilot study. We will first perform a systematic literature review to identify randomized clinical trials (RCTs) that will be used for risk of bias assessment. Using the identified RCTs, we will then do a randomized experiment, where raters will be allocated to two different training schemes: minimal training and intensive standardized training. We will calculate the chance-corrected weighted Kappa with 95% confidence intervals to quantify within- and between-group Kappa agreement for each of the domains of the risk of bias tool. To calculate between-group Kappa agreement, we will use risk of bias assessments from pairs of raters after resolution of disagreements. Between-group Kappa agreement will quantify the agreement between the risk of bias assessment of raters in the training groups and the risk of bias assessment of experienced raters. To compare agreement of raters under different training conditions, we will calculate differences between Kappa values with 95% confidence intervals. DISCUSSION This study will investigate whether the reliability of the risk of bias tool can be improved by training raters using standardized instructions for risk of bias assessment. One group of inexperienced raters will receive intensive training on risk of bias assessment and the other will receive minimal training. By including a control group with minimal training, we will attempt to mimic what many review authors commonly have to do, that is-conduct risk of bias assessment in RCTs without much formal training or standardized instructions. If our results indicate that an intense standardized training does improve the reliability of the RoB tool, our study is likely to help improve the quality of risk of bias assessments, which is a central component of evidence synthesis.

SALSA: a tool to estimate the stray light contamination for low-Earth orbit observatories

Stray light contamination reduces considerably the precision of photometric of faint stars for low altitude spaceborne observatories. When measuring faint objects, the necessity of coping with stray light contamination arises in order to avoid systematic impacts on low signal-to-noise images. Stray light contamination can be represented by a flat offset in CCD data. Mitigation techniques begin by a comprehensive study during the design phase, followed by the use of target pointing optimisation and post-processing methods. We present a code that aims at simulating the stray-light contamination in low-Earth orbit coming from reflexion of solar light by the Earth. StrAy Light SimulAtor (SALSA) is a tool intended to be used at an early stage as a tool to evaluate the effective visible region in the sky and, therefore to optimise the observation sequence. SALSA can compute Earth stray light contamination for significant periods of time allowing missionwide parameters to be optimised (e.g. impose constraints on the point source transmission function (PST) and/or on the altitude of the satellite). It can also be used to study the behaviour of the stray light at different seasons or latitudes. Given the position of the satellite with respect to the Earth and the Sun, SALSA computes the stray light at the entrance of the telescope following a geometrical technique. After characterising the illuminated region of the Earth, the portion of illuminated Earth that affects the satellite is calculated. Then, the flux of reflected solar photons is evaluated at the entrance of the telescope. Using the PST of the instrument, the final stray light contamination at the detector is calculated. The analysis tools include time series analysis of the contamination, evaluation of the sky coverage and an objects visibility predictor. Effects of the South Atlantic Anomaly and of any shutdown periods of the instrument can be added. Several designs or mission concepts can be easily tested and compared. The code is not thought as a stand-alone mission designer. Its mandatory inputs are a time series describing the trajectory of the satellite and the characteristics of the instrument. This software suite has been applied to the design and analysis of CHEOPS (CHaracterizing ExOPlanet Satellite). This mission requires very high precision photometry to detect very shallow transits of exoplanets. Different altitudes and characteristics of the detector have been studied in order to find the best parameters, that reduce the effect of contamination. © (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

A high-resolution map of direct and indirect connectivity of erosion risk areas to surface waters in Switzerland: A risk assessment tool for planning and policy-making

Off-site effects of soil erosion are becoming increasingly important, particularly the pollution of surface waters. In order to develop environmentally efficient and cost effective mitigation options it is essential to identify areas that bear both a high erosion risk and high connectivity to surface waters. This paper introduces a simple risk assessment tool that allows the delineation of potential critical source areas (CSA) of sediment input into surface waters concerning the agricultural areas of Switzerland. The basis are the erosion risk map with a 2 m resolution (ERM2) and the drainage network, which is extended by drained roads, farm tracks, and slope depressions. The probability of hydrological and sedimentological connectivity is assessed by combining soil erosion risk and extended drainage network with flow distance calculation. A GIS-environment with multiple-flow accumulation algorithms is used for routing runoff generation and flow pathways. The result is a high resolution connectivity map of the agricultural area of Switzerland (888,050 ha). Fifty-five percent of the computed agricultural area is potentially connected with surface waters, 45% is not connected. Surprisingly, the larger part of 34% (62% of the connected area) is indirectly connected with surface waters through drained roads, and only 21% are directly connected. The reason is the topographic complexity and patchiness of the landscape due to a dense road and drainage network. A total of 24% of the connected area and 13% of the computed agricultural area, respectively, are rated with a high connectivity probability. On these CSA an adapted land use is recommended, supported by vegetated buffer strips preventing sediment load. Even areas that are far away from open water bodies can be indirectly connected and need to be included in planning of mitigation measures. Thus, the connectivity map presented is an important decision-making tool for policy-makers and extension services. The map is published on the web and thus available for application.

Development of a diagnostic online tool system for Swiss sport psychology practitioners

Psychological assessment is a central component of applied sport psychology. Despite obvious and well-documented advantages of diagnostic online tools, there is a lack of a system for such tools for sport psychologists so far in Switzerland. Having the most frequently used questionnaires available online in one single tool for all listed Swiss sport psychologists would make the work of practitioners a lot easier and less time consuming. Therefore, the main goal of this project is to develop a diagnostic online tool system with the possibility to make available different questionnaires often used in sport psychology. Furthermore, we intend to survey status and use of this diagnostic online tool system and the questionnaires by Swiss sport psychologists. A specific challenge is to limit the access to qualified sport psychologists and to secure the confidentiality for the client. In particular, approved sport psychologists get an individual code for each of their athletes for the required questionnaire. With the help of this code, athletes can access the test via a secure website at any place of the world. As soon as they complete and submit the online questionnaire, analysed and interpreted data reach the sport psychologist via E-Mail, which is timesaving and easy applicable for the sport psychologist. Furthermore, data are available for interpretation with athletes and documentation of individual development over time is possible. Later on, completed and anonymised questionnaires will be collected and analysed. Bigger number of collected data give more insight in the psychometric properties, thus helping to improve and further develop the questionnaires. In this presentation, we demonstrate the tool and its feasibility using the German version of the Test of Performance Strategies (TOPS, Schmid et al., 2010). To conclude, this diagnostic online tool system offers new possibilities for sport psychologists working as practitioner.

The Role of Infrared Thermography as a Non-Invasive Tool for the Detection of Lameness in Cattle

The use of infrared thermography for the identification of lameness in cattle has increased in recent years largely because of its non-invasive properties, ease of automation and continued cost reductions. Thermography can be used to identify and determine thermal abnormalities in animals by characterizing an increase or decrease in the surface temperature of their skin. The variation in superficial thermal patterns resulting from changes in blood flow in particular can be used to detect inflammation or injury associated with conditions such as foot lesions. Thermography has been used not only as a diagnostic tool, but also to evaluate routine farm management. Since 2000, 14 peer reviewed papers which discuss the assessment of thermography to identify and manage lameness in cattle have been published. There was a large difference in thermography performance in these reported studies. However, thermography was demonstrated to have utility for the detection of contralateral temperature difference and maximum foot temperature on areas of interest. Also apparent in these publications was that a controlled environment is an important issue that should be considered before image scanning.

Behaviour change counselling for tobacco use cessation and promotion of healthy lifestyles: a systematic review

AIM To systematically assess the efficacy of oral health behaviour change counselling for tobacco use cessation (TUC) and the promotion of healthy lifestyles. MATERIALS AND METHODS Systematic Reviews, Randomized (RCTs), and Controlled Clinical Trials (CCTs) were identified through an electronic search of four databases complemented by manual search. Identification, screening, eligibility and inclusion of studies were performed independently by two reviewers. Quality assessment of the included publications was performed according to the AMSTAR tool for the assessment of the methodological quality of systematic reviews. RESULTS A total of seven systematic reviews were included. With the exception of inadequate oral hygiene, the following unhealthy lifestyles related with periodontal diseases were investigated: tobacco use, unhealthy diets, harmful use of alcohol, physical inactivity, and stress. Brief interventions for TUC were shown to be effective when applied in the dental practice setting while evidence for dietary counselling and the promotion of other healthy lifestyles was limited or non-existent. CONCLUSIONS While aiming to improve periodontal treatment outcomes and the maintenance of periodontal health current evidence suggests that tobacco use brief interventions conducted in the dental practice setting were effective thus underlining the rational for behavioural support.

Radiographic volume analysis as a novel tool to determine nasopalatine duct cyst dimensions and its association with presenting symptoms and postoperative complications

OBJECTIVES The aims of the study were to use cone beam computed tomography (CBCT) images of nasopalatine duct cysts (NPDC) and to calculate the diameter, surface area, and 3D-volume using a custom-made software program. Furthermore, any associations of dimensions of NPDC with age, gender, presence/absence of maxillary incisors/canines (MI/MC), endodontic treatment of MI/MC, presenting symptoms, and postoperative complications were evaluated. MATERIAL AND METHODS The study comprised 40 patients with a histopathologically confirmed NPDC. On preoperative CBCT scans, curves delineating the cystic borders were drawn in all planes and the widest diameter (in millimeter), surface area (in square millimeter), and volume (in cubic millimeter) were calculated. RESULTS The overall mean cyst diameter was 15 mm (range 7-47 mm), the mean cyst surface area 566 mm(2) (84-4,516 mm(2)), and the mean cyst volume 1,735 mm(3) (65-25,350 mm(3)). For 22 randomly allocated cases, a second measurement resulted in a mean absolute aberration of ±4.2 % for the volume, ±2.8 % for the surface, and ±4.9 % for the diameter. A statistically significant association was found for the CBCT determined cyst measurements and the need for preoperative endodontic treatment to MI/MC and for postoperative complications. CONCLUSION In the hands of a single experienced operator, the novel software exhibited high repeatability for measurements of cyst dimensions. Further studies are needed to assess the application of this tool for dimensional analysis of different jaw cysts and lesions including treatment planning. CLINICAL RELEVANCE Accurate radiographic information of the bone volume lost (osteolysis) due to expansion of a cystic lesion in three dimensions could help in personalized treatment planning.

Use of quality assessment tools in systematic reviews was varied and inconsistent

OBJECTIVES To assess the use of quality assessment tools among a cross-section of systematic reviews (SRs) and to further evaluate whether quality was used as a parameter in the decision to include primary studies within subsequent meta-analysis. STUDY DESIGN AND SETTING We searched PubMed for SRs (interventional, observational, and diagnostic) published in Core Clinical Journals between January 1 and March 31, 2014. RESULTS Three hundred nine SRs were identified. Quality assessment was undertaken in 222 (71.8%) with isolated use of the Cochrane risk of bias tool (26.1%, n = 58) and the Newcastle-Ottawa Scale (15.3%, n = 34) most common. A threshold level of primary study quality for subsequent meta-analysis was used in 12.9% (40 of 309) of reviews. Overall, fifty-four combinations of quality assessment tools were identified with a similar preponderance of tools used among observational and interventional reviews. Multiple tools were used in 11.7% (n = 36) of SRs overall. CONCLUSION We found that quality assessment tools were used in a majority of SRs; however, a threshold level of quality for meta-analysis was stipulated in just 12.9% (n = 40). This cross-sectional analysis provides further evidence of the need for more active or intuitive editorial processes to enhance the reporting of SRs.

A photopolymerized composite hydrogel and surgical implanting tool for a nucleus pulposus replacement

Nucleus pulposus replacements have been subjected to highly controversial discussions over the last 40 years. Their use has not yet resulted in a positive outcome to treat herniated disc or degenerated disc disease. The main reason is that not a single implant or tissue replacement was able to withstand the loads within an intervertebral disc. Here, we report on the development of a photo-polymerizable poly(ethylene glycol)dimethacrylate nano-fibrillated cellulose composite hydrogel which was tuned according to native tissue properties. Using a customized minimally-invasive medical device to inject and photopolymerize the hydrogel insitu, samples were implanted through an incision of 1 mm into an intervertebral disc of a bovine organ model to evaluate their long-term performance. When implanted into the bovine disc model, the composite hydrogel implant was able to significantly re-establish disc height after surgery (p < 0.0025). The height was maintained after 0.5 million loading cycles (p < 0.025). The mechanical resistance of the novel composite hydrogel material combined with the minimally invasive implantation procedure into a bovine disc resulted in a promising functional orthopedic implant for the replacement of the nucleus pulposus.

Use of a novel DNA melting profile assay for the identification of PCR-amplified genomic sequences encoding for variant-specific surface proteins from the clonal GS/M-83-H7 line of Giardia lamblia.

During infections, Giardia lamblia undergoes a continuous change of its major surface antigens, the variant-specific surface proteins (VSPs). Many studies on antigenic variation have been performed using G. lamblia clone GS/M-83-H7, which expresses surface antigen VSP H7. The present study was focused on the identification and characterization of vsp gene sequences within the genome of the clonal G. lamblia GS/M-83-H7 line. For this purpose, we applied a PCR which specifically amplified truncated sequences from the 3'-terminal region of the vsp genes. Upon cloning, most of the vsp gene amplification products were shown to be approximately identical in size and thus could not be distinguished from each other by conventional gel electrophoresis. In order to pre-estimate the sequence complexity within the large panel of vsp clones isolated, we elaborated a novel concept which facilitated our large-scale genetic screening approach: PCR products from cloned DNA molecules were generated and then subjected to a DNA melting profile assay based on the use of the LightCycler Instrument. This high-throughput assay system proved to be well suited to monitor sequence differences between the amplification products from closely related vsp genes and thus could be used for the primary, sequence-related discrimination of the corresponding clones. After testing 50 candidates, vsp clones could be divided into five groups, each characterized by an individual DNA melting profile of the corresponding amplification products. Sequence analysis of some of these 50 candidates confirmed data from the aforementioned assay in that clones were demonstrated to be identical within, but different between, the distinct groups. The nucleotide and deduced amino acid sequences of five representative vsp clones showed high similarities both among each other and also with the corresponding gene segment of the variant-specific surface antigen (VSP H7) expressed by the original GS/M-83-H7 variant type. Furthermore, three of the genomic vsp sequences turned out to be identical to vsp sequences that represented previously characterized transcription products from in vivo- or in vitro-switched GS/M-83-H7 trophozoites. In conclusion, the DNA melting profile assay seems to be a versatile tool for the PCR-based genotyping of moderately or highly diversified sequence orthologues.