Success rate and efficiency of activator treatment

In a retrospective multicentre study, the success rate and efficiency of activator treatment were analysed. All patients from two University clinics (Giessen, Germany and Berne, Switzerland) that fulfilled the selection criteria (Class II division 1 malocclusion, activator treatment, no aplasia, no extraction of permanent teeth, no syndromes, no previous orthodontic treatment except transverse maxillary expansion, full available records) were included in the study. The subject material amounted to 222 patients with a mean age of 10.6 years. Patient records, lateral head films, and dental casts were evaluated. Treatment was classified as successful if the molar relationship improved by at least half to three-fourths cusp width depending on whether or not the leeway space was used during treatment. Group comparisons were carried out using Wilcoxon two-sample and Kruskal-Wallis tests. For discrete data, chi-square analysis was used and Fisher's exact test when the sample size was small. Stepwise logistic regression was also employed. The success rate was 64 per cent in Giessen and 66 per cent in Berne. The only factor that significantly (P < 0.001) influenced treatment success was the level of co-operation. In approximately 27 per cent of the patients at both centres, the post-treatment occlusion was an 'ideal' Class I. In an additional 38 per cent of the patients, marked improvements in occlusal relationships were found. In subjects with Class II division 1 malocclusions, in which orthodontic treatment is performed by means of activators, a marked improvement of the Class II dental arch relationships can be expected in approximately 65 per cent of subjects. Activator treatment is more efficient in the late than in the early mixed dentition.

Simulation in training: one-year experience using an efficiency index to assess interventional radiology fellow training status

PURPOSE: To compare objective fellow and expert efficiency indices for an interventional radiology renal artery stenosis skill set with the use of a high-fidelity simulator. MATERIALS AND METHODS: The Mentice VIST simulator was used for three different renal artery stenosis simulations of varying difficulty, which were used to grade performance. Fellows' indices at three intervals throughout 1 year were compared to expert baseline performance. Seventy-four simulated procedures were performed, 63 of which were captured as audiovisual recordings. Three levels of fellow experience were analyzed: 1, 6, and 12 months of dedicated interventional radiology fellowship. The recordings were compiled on a computer workstation and analyzed. Distinct measurable events in the procedures were identified with task analysis, and data regarding efficiency were extracted. Total scores were calculated as the product of procedure time, fluoroscopy time, tools, and contrast agent volume. The lowest scores, which reflected efficient use of tools, radiation, and time, were considered to indicate proficiency. Subjective analysis of participants' procedural errors was not included in this analysis. RESULTS: Fellows' mean scores diminished from 1 month to 12 months (42,960 at 1 month, 18,726 at 6 months, and 9,636 at 12 months). The experts' mean score was 4,660. In addition, the range of variance in score diminished with increasing experience (from a range of 5,940-120,156 at 1 month to 2,436-85,272 at 6 months and 2,160-32,400 at 12 months). Expert scores ranged from 1,450 to 10,800. CONCLUSIONS: Objective efficiency indices for simulated procedures can demonstrate scores directly comparable to the level of clinical experience.

Mid-term results in relation to age and analysis of predictive factors after fixation of acetabular fractures using the modified Stoppa approach.

INTRODUCTION Data concerning outcome after management of acetabular fractures by anterior approaches with focus on age and fractures associated with roof impaction, central dislocation and/or quadrilateral plate displacement are rare. METHODS Between October 2005 and April 2009 a series of 59 patients (mean age 57 years, range 13-91) with fractures involving the anterior column was treated using the modified Stoppa approach alone or for reduction of displaced iliac wing or low anterior column fractures in combination with the 1st window of the ilioinguinal approach or the modified Smith-Petersen approach, respectively. Surgical data, accuracy of reduction, clinical and radiographic outcome at mid-term and the need for endoprosthetic replacement in the postoperative course (defined as failure) were assessed; uni- and multivariate regression analysis were performed to identify independent predictive factors (e.g. age, nonanatomical reduction, acetabular roof impaction, central dislocation, quadrilateral plate displacement) for a failure. Outcome was assessed for all patients in general and in accordance to age in particular; patients were subdivided into two groups according to their age (group "<60yrs", group "≥60yrs"). RESULTS Forty-three of 59 patients (mean age 54yrs, 13-89) were available for evaluation. Of these, anatomic reduction was achieved in 72% of cases. Nonanatomical reduction was identified as being the only multivariate predictor for subsequent total hip replacement (Adjusted Hazard Ratio 23.5; p<0.01). A statistically significant higher rate of nonanatomical reduction was observed in the presence of acetabular roof impaction (p=0.01). In 16% of all patients, total hip replacement was performed and in 69% of patients with preserved hips the clinical results were excellent or good at a mean follow up of 35±10 months (range: 24-55). No statistical significant differences were observed between both groups. CONCLUSION Nonanatomical reconstruction of the articular surfaces is at risk for failure of joint-preserving management of acetabular fractures through an isolated or combined modified Stoppa approach resulting in total joint replacement at mid-term. In the elderly, joint-preserving surgery is worth considering as promising clinical and radiographic results might be obtained at mid-term.

Serial lactate and admission SOFA scores in trauma: an analysis of predictive value in 724 patients with and without traumatic brain injury

Objective Arterial lactate, base excess (BE), lactate clearance, and Sequential Organ Failure Assessment (SOFA) score have been shown to correlate with outcome in severely injured patients. The goal of the present study was to separately assess their predictive value in patients suffering from traumatic brain injury (TBI) as opposed to patients suffering from injuries not related to the brain. Materials and methods A total of 724 adult trauma patients with an Injury Severity Score (ISS) ≥ 16 were grouped into patients without TBI (non-TBI), patients with isolated TBI (isolated TBI), and patients with a combination of TBI and non-TBI injuries (combined injuries). The predictive value of the above parameters was then analyzed using both uni- and multivariate analyses. Results The mean age of the patients was 39 years (77 % males), with a mean ISS of 32 (range 16–75). Mortality ranged from 14 % (non-TBI) to 24 % (combined injuries). Admission and serial lactate/BE values were higher in non-survivors of all groups (all p < 0.01), but not in patients with isolated TBI. Admission SOFA scores were highest in non-survivors of all groups (p = 0.023); subsequently septic patients also showed elevated SOFA scores (p < 0.01), except those with isolated TBI. In this group, SOFA score was the only parameter which showed significant differences between survivors and non-survivors. Receiver operating characteristic (ROC) analysis revealed lactate to be the best overall predictor for increased mortality and further septic complications, irrespective of the leading injury. Conclusion Lactate showed the best performance in predicting sepsis or death in all trauma patients except those with isolated TBI, and the differences were greatest in patients with substantial bleeding. Following isolated TBI, SOFA score was the only parameter which could differentiate survivors from non-survivors on admission, although the SOFA score, too, was not an independent predictor of death following multivariate analysis.

Economic efficiency analysis of different strategies to control post-weaning multi-systemic wasting syndrome and porcine circovirus type 2 subclinical infection in 3-weekly batch system farms.

The study assessed the economic efficiency of different strategies for the control of post-weaning multi-systemic wasting syndrome (PMWS) and porcine circovirus type 2 subclinical infection (PCV2SI), which have a major economic impact on the pig farming industry worldwide. The control strategies investigated consisted on the combination of up to 5 different control measures. The control measures considered were: (1) PCV2 vaccination of piglets (vac); (2) ensuring age adjusted diet for growers (diets); (3) reduction of stocking density (stock); (4) improvement of biosecurity measures (bios); and (5) total depopulation and repopulation of the farm for the elimination of other major pathogens (DPRP). A model was developed to simulate 5 years production of a pig farm with a 3-weekly batch system and with 100 sows. A PMWS/PCV2SI disease and economic model, based on PMWS severity scores, was linked to the production model in order to assess disease losses. This PMWS severity scores depends on the combination post-weaning mortality, PMWS morbidity in younger pigs and proportion of PCV2 infected pigs observed on farms. The economic analysis investigated eleven different farm scenarios, depending on the number of risk factors present before the intervention. For each strategy, an investment appraisal assessed the extra costs and benefits of reducing a given PMWS severity score to the average score of a slightly affected farm. The net present value obtained for each strategy was then multiplied by the corresponding probability of success to obtain an expected value. A stochastic simulation was performed to account for uncertainty and variability. For moderately affected farms PCV2 vaccination alone was the most cost-efficient strategy, but for highly affected farms it was either PCV2 vaccination alone or in combination with biosecurity measures, with the marginal profitability between 'vac' and 'vac+bios' being small. Other strategies such as 'diets', 'vac+diets' and 'bios+diets' were frequently identified as the second or third best strategy. The mean expected values of the best strategy for a moderately and a highly affected farm were £14,739 and £57,648 after 5 years, respectively. This is the first study to compare economic efficiency of control strategies for PMWS and PCV2SI. The results demonstrate the economic value of PCV2 vaccination, and highlight that on highly affected farms biosecurity measures are required to achieve optimal profitability. The model developed has potential as a farm-level decision support tool for the control of this economically important syndrome.

Torque efficiency of different archwires in 0.018- and 0.022-inch conventional brackets.

OBJECTIVE To compare the archwires inserted during the final stages of the orthodontic treatment with the generated moments at 0.018- and 0.022-inch brackets. MATERIALS AND METHODS The same bracket type, in terms of prescription, was evaluated in both slot dimensions. The brackets were bonded on two identical maxillary acrylic resin models, and each model was mounted on the orthodontic measurement and simulation system. Ten 0.017 × 0.025-inch TMA and ten 0.017 × 0.025-inch stainless steel archwires were evaluated in the 0.018-inch brackets. In the 0.022-inch brackets, ten 0.019 × 0.025-inch TMA and ten 0.019 × 0.025-inch stainless steel archwires were measured. A 15° buccal root torque (+15°) and then a 15° palatal root torque (-15°) were gradually applied to the right central incisor bracket, and the moments were recorded at these positions. A t-test was conducted to compare the generated moments between wires within the 0.018- and 0.022-inch bracket groups separately. RESULTS The 0.017 × 0.025-inch archwire in the 0.018-inch brackets generated mean moments of 9.25 Nmm and 14.2 Nmm for the TMA and stainless steel archwires, respectively. The measured moments in the 0.022-inch brackets with the 0.019 × 0.025-inch TMA and stainless steel archwires were 6.6 Nmm and 9.3 Nmm, respectively. CONCLUSION The 0.017 × 0.025-inch stainless steel and β-Ti archwires in the 0.018-inch slot generated higher moments than the 0.019 × 0.025-inch archwires because of lower torque play. This difference is exaggerated in steel archwires, in comparison with the β-Ti, because of differences in stiffness. The differences of maximum moments between the archwires of the same cross-section but different alloys were statistically significant at both slot dimensions.

What does professionalisation mean? Perceptions of professionalisation in swiss sport federations

Introduction: Organisational changes in sports federations are often associated with a drift from a volunteer driven to an increasingly business-like phenomenon (Shilbury & Ferkins, 2011). This process of transfor-mation is be called as “professionalization”. Accordingly, professionalization seems to be an appropriate strategy for sport organisations in order to meet organizational pressure due to challenges of a more complex and dynamic changing environment adequately. Despite the increasing research interest and the attempts for systematization on the phenomenon of professionalization it still remains unclear what does the term professionalization exactly mean (Dowling et al., 2014). Thus, there is a lack of a consistent concept of professionalization that is needed in order to explore different facets and perspectives of this phenomenon more validly. Against this background following question emerged: What is the suitable concept of professionalization for analyzing the actual ongoing processes of change, adaption or transformation in sport federations? Methods: Dealing with this question, following two-step approach was choosen: (1) In a first step a scholar’s perspective at professionalisation of sport organisations will be displayed in order to explore both the common ground as well as divergences and inconsistencies in previous approaches. Therefore, a literature review is indicated. (2) In a second step, and in contrast to previous studies we will consider a practical point of view by a so called second-order observation of experts to gain valuable insights into current thinking and acting towards professionalization in sport federations. In doing so, a hermeneutical approach is used, which is about understanding the meaning of contexts by grasping the everyday world, and draw insight and meaning from it (Shilbury et al., 2013). Accordance with hermeneutics, the explorative interpretive knowledge of expert interviews was used. The interviews were conducted with a sample of six selected experts, who have both dedicated insider knowledge and the overall view of all Swiss sport federations. Results and discussion: The summaries of literature review could be categorized into two research currents. The one defines professionalization as a structural process towards professional status of occupations. The other defines it in a broader sense as an organisational change towards a business-like approach. Whereas the first perspective there is a broad scientific consensus that second isn’t that clear, however. Explorative analysis of interview data reveals different themes in relation to professionalization of sports federation. First theme deals with a changed philosophy as more strategic alignment towards for-profit, efficiency and quality orientation. Second theme refers to paid work associated with more competence orientation and balanced governance between paid and voluntary work. Third theme deals with acting shift towards more rationalization and efficiency by implementation of innovative management and communication tools. Based on findings of both our review of scholar`s perspective as well insights from experts we will provide – in the sense of synthesis – a more clear understanding of what does professionalization mean that can be useful in terms of further studies. References: Dowling, M., Edwards, J. & Washington, M. (2014). Understanding the concept of professionalisation in sport management research. Sport Management Review, 17 (4), 520–529. Shilbury, D., Ferkins, L. & Smythe, L. (2013). Sport governance encounters: Insights from lived experiences. Sport Management Review, 16,349–363. Shilbury, D., & Ferkins, L. (2011). Professionalisation, sport governance and strategic capability. Managing Leisure, 16, 108–127.

Time-Efficiency Analysis Comparing Digital and Conventional Workflows for Implant Crowns: A Prospective Clinical Crossover Trial

PURPOSE To compare time-efficiency in the production of implant crowns using a digital workflow versus the conventional pathway. MATERIALS AND METHODS This prospective clinical study used a crossover design that included 20 study participants receiving single-tooth replacements in posterior sites. Each patient received a customized titanium abutment plus a computer-aided design/computer-assisted manufacture (CAD/CAM) zirconia suprastructure (for those in the test group, using digital workflow) and a standardized titanium abutment plus a porcelain-fused-to-metal crown (for those in the control group, using a conventional pathway). The start of the implant prosthetic treatment was established as the baseline. Time-efficiency analysis was defined as the primary outcome, and was measured for every single clinical and laboratory work step in minutes. Statistical analysis was calculated with the Wilcoxon rank sum test. RESULTS All crowns could be provided within two clinical appointments, independent of the manufacturing process. The mean total production time, as the sum of clinical plus laboratory work steps, was significantly different. The mean ± standard deviation (SD) time was 185.4 ± 17.9 minutes for the digital workflow process and 223.0 ± 26.2 minutes for the conventional pathway (P = .0001). Therefore, digital processing for overall treatment was 16% faster. Detailed analysis for the clinical treatment revealed a significantly reduced mean ± SD chair time of 27.3 ± 3.4 minutes for the test group compared with 33.2 ± 4.9 minutes for the control group (P = .0001). Similar results were found for the mean laboratory work time, with a significant decrease of 158.1 ± 17.2 minutes for the test group vs 189.8 ± 25.3 minutes for the control group (P = .0001). CONCLUSION Only a few studies have investigated efficiency parameters of digital workflows compared with conventional pathways in implant dental medicine. This investigation shows that the digital workflow seems to be more time-efficient than the established conventional production pathway for fixed implant-supported crowns. Both clinical chair time and laboratory manufacturing steps could be effectively shortened with the digital process of intraoral scanning plus CAD/CAM technology.

Tooth loss, chewing efficiency and cognitive impairment in geriatric patients.

BACKGROUND Patients with dementia have poorer oral health and fewer teeth than their peers without cognitive impairment. OBJECTIVE The hypothesis of this study is that the number of natural teeth and the chewing efficiency are associated with cognitive functioning. METHODS This cross-sectional study included 29 patients diagnosed with dementia aged 75 years or older and 22 controls who were either cognitively normal (n = 19) or with mild cognitive impairment (n = 3). Neuropsychological, nutritional and dental assessments were performed. The chewing efficiency was evaluated with a two-colour mixing test. RESULTS Demented patients and controls presented with a mean of 4.9 and 6.5 teeth, respectively (n.s.). The number of natural teeth was not associated with dementia (p = 0.553). Same results were found for age (p = 0.746) and sex (p = 0.901). The chewing efficiency by visual inspection proved worse in participants with dementia than in the controls (p < 0.011) and explained 9.3% of the variance in the diagnosis of dementia. Neither dental state nor chewing efficiency was related to the nutritional state. CONCLUSION Chewing efficiency seems stronger associated with cognitive impairment than the number of teeth. Hence, in a more holistic approach for the geriatric assessment, the dental examination may be complemented by a chewing efficiency test.

Contrasting growth and water use efficiency after thinning in mixed Abies pinsapo–Pinus pinaster–Pinus sylvestris forests

Foresters frequently lack sufficient information about thinning intensity effects to optimize semi-natural forest management and their effects and interaction with climate are still poorly understood. In an Abies pinsapo–Pinus pinaster–Pinus sylvestris forest with three thinning intensities, a dendrochronologial approach was used to evaluate the short-term responses of basal area increment (BAI), carbon isotope (δ13C) and water use efficiency (iWUE) to thinning intensity and climate. Thinning generally increased BAI in all species, except for the heavy thinning in P. sylvestris. Across all the plots, thinning increased 13C-derived water-use efficiency on average by 14.49% for A. pinsapo, 9.78% for P. sylvestris and 6.68% for P. pinaster, but through different ecophysiological mechanisms. Our findings provide a robust mean of predicting water use efficiency responses from three coniferous species exposed to different thinning strategies which have been modulated by climatic conditions over time.