Consensus statement of the European Heart Rhythm Association: updated recommendations for driving by patients with implantable cardioverter defibrillators

Patients with an implantable cardioverter defibrillator (ICD) have an ongoing risk of sudden incapacitation that might cause harm to others while driving a car. Driving restrictions vary across different countries in Europe. The most recent recommendations for driving of ICD patients in Europe were published in 1997 and focused mainly on patients implanted for secondary prevention. In recent years there has been a vast increase in the number of patients with an ICD and in the percentage of patients implanted for primary prevention. The EHRA task force on ICD and driving was formed to reassess the risk of driving for ICD patients based on the literature available. The recommendations are summarized in the following table and are further explained in the document. [table: see text] Driving restrictions are perceived as difficult for patients and their families, and have an immediate consequence for their lifestyle. To increase the adherence to the driving restrictions, adequate discharge of education and follow-up of patients and family are pivotal. The task force members hope this document may serve as an instrument for European and national regulatory authorities to formulate uniform driving regulations.

SLA-driven predictive orchestration for distributed cloud-based mobile services

We describe a system for performing SLA-driven management and orchestration of distributed infrastructures composed of services supporting mobile computing use cases. In particular, we focus on a Follow-Me Cloud scenario in which we consider mobile users accessing cloud-enable services. We combine a SLA-driven approach to infrastructure optimization, with forecast-based performance degradation preventive actions and pattern detection for supporting mobile cloud infrastructure management. We present our system's information model and architecture including the algorithmic support and the proposed scenarios for system evaluation.

Influence of an electromagnetic field on high dilutions measured by ultraviolet light spectroscopy

Background: High dilutions of various starting materials, e.g. copper sulfate, Hypericum perforatum and sulfur, showed significant differences from controls and amongst different dilution levels in ultraviolet light (UV) transmission [1,2]. Exposure of high dilutions to external physical factors such as UV light or elevated temperature (37°C) also yielded significantly different UV transmissions compared to unexposed dilutions [2,3]. In a study with highland frogs it was shown that animals incubated with thyroxine 30c but not with thyroxine 30c exposed to electromagnetic fields (EMFs) of a microwave oven or mobile phone metamorphosed more slowly than control animals [4]. Aims: The aim was to test whether the EMF of a mobile phone influences the UV absorbance of dilutions of quartz and Atropa belladonna (AB). Methodology: Commercially available dilutions of 6x, 12x, 15x, 30x in H2O and 19% ethanol of quartz (SiO2) and of 4x, 6x, 12x, 15x, 30x in H2O and 19% ethanol of AB were used in the experiments (Weleda AG, Arlesheim, Switzerland). Four samples of each dilution were exposed to the EMF of a mobile phone (Philips, Savvy Dual Band) at 900 MHz with an output of 2 W for 3 h, while control samples (4 of each dilution) were kept in a separate room. Absorbance of the samples in the UV range (from 190 to 340 nm) was measured in a randomized order with a Shimadzu UV-1800 spectrophotometer equipped with an auto sampler. In total 5 separate measurement days will be carried out for quartz and for AB dilutions. The average absorbance from 200 to 340 nm and from 200 to 240 nm was compared among dilution levels using a Kruskal-Wallis test and between exposed and unexposed samples using a Mann-Whitney-U test. Results: Preliminary results after 2 measurement days indicated that for quartz the absorbance of the various dilution levels was different from each other (except 12x and 15x), and that samples exposed to an EMF did not show a difference in UV absorbance from unexposed samples. Preliminary results after one measurement day indicated that for AB the absorbance of the various dilution levels was different from each other. The samples exposed to an EMF did not show a difference in UV absorbance from unexposed samples (except 4x in the range from 200 – 240 nm). Conclusions: These results suggest that exposure of high dilutions of quartz and AB to a mobile phone EMF as used here does not alter UV absorbance of these dilutions. The final results will show whether this holds true.

Development of a novel driving behavior adaptations questionnaire

ABSTRACT Background: Driving a car requires adapting one's behavior to current task demands taking into account one's capacities. With increasing age, driving-relevant cognitive performance may decrease, creating a need for risk-reducing behavioral adaptations. Three different kinds of behavioral adaptations are known: selection, optimization, and compensation. These can occur on the tactical and the strategic level. Risk-reducing behavioral adaptations should be considered when evaluating older drivers' traffic-related risks. Methods: A questionnaire to assess driving-related behavioral adaptations in older drivers was created. The questionnaire was administered to 61 years older (age 65-87 years; mean age = 70.2 years; SD = 5.5 years; 30 female, 31 male) and 31 younger participants (age 22-55 years; mean age = 30.5 years; SD = 6.3 years; 16 female and 15 male) to explore age and gender differences in behavioral adaptations. Results: Two factors were extracted from the questionnaire, a risk-increasing factor and a risk-reducing factor. Group comparisons revealed significantly more risk-reducing behaviors in older participants (t(84.5) = 2.21, p = 0.013) and females (t(90) = 2.52, p = 0.014) compared, respectively, to younger participants and males. No differences for the risk-increasing factor were found (p > 0.05). Conclusions: The questionnaire seems to be a useful tool to assess driving-related behavioral adaptations aimed at decreasing the risk while driving. The possibility to assess driving-related behavioral adaptations in a systematic way enables a more resource-oriented approach in the evaluation of fitness to drive in older drivers.

Good intents but low impacts: Various determinants for different indicators of overall energy use

Energy consumption in industrialized countries by far exceeds a sustainable level. Previous research on determinants of overall consumption levels has yielded contradictory results as to what the main drivers are. While research on the relationship of environmental concerns and pro-environmental behavior emphasizes the importance of motivational aspects, more impact-oriented research challenges these findings and underlines the impacts of a person’s social standing. The aim of our research was to determine which amount of per-capita energy consumption can be explained by structural, socio-demographic, and pro-environmentally motivational variables. Data come from standardized interviews with a representative sample (N=1014) in Germany. Different indicators of per-capita use were collected and will provide the basis for calculating the overall consumption level. In addition, person variables, lifestyle milieus, self-reported energy use, and motivational variables were assessed. First regression analyses show various patterns of determinants for different indicators of overall energy use. While variance in self-reported use is mainly explained by environmental concern, more impact-oriented indicators, such as the size of personal living space and distances of vacation trips, predominantly correlate with status-relevant predictors. These preliminary results support the suspicion that although environmentally aware people intend to reduce their energy use, they rarely go beyond low-impact actions.

Subjective perception of sleepiness in a driving simulator is different from that in the Maintenance of Wakefulness Test.

OBJECTIVE To test whether sleep-deprived, healthy subjects who do not always signal spontaneously perceived sleepiness (SPS) before falling asleep during the Maintenance of Wakefulness Test (MWT) would do so in a driving simulator. METHODS Twenty-four healthy subjects (20-26 years old) underwent a MWT for 40 min and a driving simulator test for 1 h, before and after one night of sleep deprivation. Standard electroencephalography, electrooculography, submental electromyography, and face videography were recorded simultaneously to score wakefulness and sleep. Subjects were instructed to signal SPS as soon as they subjectively felt sleepy and to try to stay awake for as long as possible in every test. They were rewarded for both "appropriate" perception of SPS and staying awake for as long as possible. RESULTS After sleep deprivation, seven subjects (29%) did not signal SPS before falling asleep in the MWT, but all subjects signalled SPS before falling asleep in the driving simulator (p <0.004). CONCLUSIONS The previous results of an "inaccurate" SPS in the MWT were confirmed, and a perfect SPS was shown in the driving simulator. It was hypothesised that SPS is more accurate for tasks involving continuous feedback of performance, such as driving, compared to the less active situation of the MWT. Spontaneously perceived sleepiness in the MWT cannot be used to judge sleepiness perception while driving. Further studies are needed to define the accuracy of SPS in working tasks or occupations with minimal or no performance feedback.

[The influence of the socio-economic structure of the breeding farms of Franches-Montagnes horses on the conditions of husbandry]

The socio-economic structure of the breeding farms of Franches-Montagnes horses (FM) in Switzerland is evaluated on the basis of an investigation carried out in 2002 by the Swiss FM breeding federation. Questionnaires were sent to 3500 of its members and the results include data from 968 breeding enterprises, housing a total of 3965 FM. The quality of the husbandry of FM varies according to factors such as the altitude and the geographical situation of the farms and studs. Socio-economic parameters, such as the role of FM in the business, their use (breeding, driving, riding) and the age and level of professional education of the owners may also have an effect on standards of husbandry. The results show that the owners for whom FM represent a source of income more frequently keep their horses in standing stalls, but give them more time to exercise at liberty than the horses belonging to amateur breeders. Younger and better educated breeders are more likely to house their animals in groups.

Exposure modeling of high-frequency electromagnetic fields

We developed a geospatial model that calculates ambient high-frequency electromagnetic field (HF-EMF) strengths of stationary transmission installations such as mobile phone base stations and broadcast transmitters with high spatial resolution in the order of 1 m. The model considers the location and transmission patterns of the transmitters, the three-dimensional topography, and shielding effects by buildings. The aim of the present study was to assess the suitability of the model for exposure monitoring and for epidemiological research. We modeled time-averaged HF-EMF strengths for an urban area in the city of Basel as well as for a rural area (Bubendorf). To compare modeling with measurements, we selected 20 outdoor measurement sites in Basel and 18 sites in Bubendorf. We calculated Pearson's correlation coefficients between modeling and measurements. Chance-corrected agreement was evaluated by weighted Cohen's kappa statistics for three exposure categories. Correlation between measurements and modeling of the total HF-EMF strength was 0.67 (95% confidence interval (CI): 0.33-0.86) in the city of Basel and 0.77 (95% CI: 0.46-0.91) in the rural area. In both regions, kappa coefficients between measurements and modeling were 0.63 and 0.77 for the total HF-EMF strengths and for all mobile phone frequency bands. First evaluation of our geospatial model yielded substantial agreement between modeling and measurements. However, before the model can be applied for future epidemiologic research, additional validation studies focusing on indoor values are needed to improve model validity.Journal of Exposure Science and Environmental Epidemiology (2008) 18, 183-191; doi:10.1038/sj.jes.7500575; published online 4 April 2007.

Radiofrequency electromagnetic field exposure and non-specific symptoms of ill health: A systematic review

This article is a systematic review of whether everyday exposure to radiofrequency electromagnetic field (RF-EMF) causes symptoms, and whether some individuals are able to detect low-level RF-EMF (below the ICNIRP [International Commission on Non-Ionizing Radiation Protection] guidelines). Peer-reviewed articles published before August 2007 were identified by means of a systematic literature search. Meta-analytic techniques were used to pool the results from studies investigating the ability to discriminate active from sham RF-EMF exposure. RF-EMF discrimination was investigated in seven studies including a total of 182 self-declared electromagnetic hypersensitive (EHS) individuals and 332 non-EHS individuals. The pooled correct field detection rate was 4.2% better than expected by chance (95% CI: -2.1 to 10.5). There was no evidence that EHS individuals could detect presence or absence of RF-EMF better than other persons. There was little evidence that short-term exposure to a mobile phone or base station causes symptoms based on the results of eight randomized trials investigating 194 EHS and 346 non-EHS individuals in a laboratory. Some of the trials provided evidence for the occurrence of nocebo effects. In population based studies an association between symptoms and exposure to RF-EMF in the everyday environment was repeatedly observed. This review showed that the large majority of individuals who claims to be able to detect low level RF-EMF are not able to do so under double-blind conditions. If such individuals exist, they represent a small minority and have not been identified yet. The available observational studies do not allow differentiating between biophysical from EMF and nocebo effects.

Temporal and spatial variability of personal exposure to radio frequency electromagnetic fields

BACKGROUND: Little is known about the population's exposure to radio frequency electromagnetic fields (RF-EMF) in industrialized countries. OBJECTIVES: To examine levels of exposure and the importance of different RF-EMF sources and settings in a sample of volunteers living in a Swiss city. METHODS: RF-EMF exposure of 166 volunteers from Basel, Switzerland, was measured with personal exposure meters (exposimeters). Participants carried an exposimeter for 1 week (two separate weeks in 32 participants) and completed an activity diary. Mean values were calculated using the robust regression on order statistics (ROS) method. RESULTS: Mean weekly exposure to all RF-EMF sources was 0.13 mW/m(2) (0.22 V/m) (range of individual means 0.014-0.881 mW/m(2)). Exposure was mainly due to mobile phone base stations (32.0%), mobile phone handsets (29.1%) and digital enhanced cordless telecommunications (DECT) phones (22.7%). Persons owning a DECT phone (total mean 0.15 mW/m(2)) or mobile phone (0.14 mW/m(2)) were exposed more than those not owning a DECT or mobile phone (0.10 mW/m(2)). Mean values were highest in trains (1.16 mW/m(2)), airports (0.74 mW/m(2)) and tramways or buses (0.36 mW/m(2)), and higher during daytime (0.16 mW/m(2)) than nighttime (0.08 mW/m(2)). The Spearman correlation coefficient between mean exposure in the first and second week was 0.61. CONCLUSIONS: Exposure to RF-EMF varied considerably between persons and locations but was fairly consistent within persons. Mobile phone handsets, mobile phone base stations and cordless phones were important sources of exposure in urban Switzerland.

A prediction model for personal radio frequency electromagnetic field exposure

Radio frequency electromagnetic fields (RF-EMF) in our daily life are caused by numerous sources such as fixed site transmitters (e.g. mobile phone base stations) or indoor devices (e.g. cordless phones). The objective of this study was to develop a prediction model which can be used to predict mean RF-EMF exposure from different sources for a large study population in epidemiological research. We collected personal RF-EMF exposure measurements of 166 volunteers from Basel, Switzerland, by means of portable exposure meters, which were carried during one week. For a validation study we repeated exposure measurements of 31 study participants 21 weeks after the measurements of the first week on average. These second measurements were not used for the model development. We used two data sources as exposure predictors: 1) a questionnaire on potentially exposure relevant characteristics and behaviors and 2) modeled RF-EMF from fixed site transmitters (mobile phone base stations, broadcast transmitters) at the participants' place of residence using a geospatial propagation model. Relevant exposure predictors, which were identified by means of multiple regression analysis, were the modeled RF-EMF at the participants' home from the propagation model, housing characteristics, ownership of communication devices (wireless LAN, mobile and cordless phones) and behavioral aspects such as amount of time spent in public transports. The proportion of variance explained (R2) by the final model was 0.52. The analysis of the agreement between calculated and measured RF-EMF showed a sensitivity of 0.56 and a specificity of 0.95 (cut-off: 90th percentile). In the validation study, the sensitivity and specificity of the model were 0.67 and 0.96, respectively. We could demonstrate that it is feasible to model personal RF-EMF exposure. Most importantly, our validation study suggests that the model can be used to assess average exposure over several months.

A communication and information technology infrastructure for real time monitoring and management of type 1 diabetes patients

This paper is focused on the integration of state-of-the-art technologies in the fields of telecommunications, simulation algorithms, and data mining in order to develop a Type 1 diabetes patient's semi to fully-automated monitoring and management system. The main components of the system are a glucose measurement device, an insulin delivery system (insulin injection or insulin pumps), a mobile phone for the GPRS network, and a PDA or laptop for the Internet. In the medical environment, appropriate infrastructure for storage, analysis and visualizing of patients' data has been implemented to facilitate treatment design by health care experts.

Reputation Formation and the Evolution of Cooperation in Anonymous Online Markets

Theoretical propositions stressing the importance of trust, reciprocity, and reputation for cooperation in social exchange relations are deeply rooted in classical sociological thought. Today’s online markets provide a unique opportunity to test these theories using unobtrusive data. Our study investigates the mechanisms promoting cooperation in an online-auction market where most transactions can be conceived as one-time-only exchanges. We first give a systematic account of the theoretical arguments explaining the process of cooperative transactions. Then, using a large dataset comprising 14,627 mobile phone auctions and 339,517 DVD auctions, we test key hypotheses about the effects of traders’ reputations on auction outcomes and traders’ motives for leaving feedback. Our statistical analyses show that sellers with better reputations have higher sales and obtain higher prices. Furthermore, we observe a high rate of participation in the feedback system, which is largely consistent with strong reciprocity—a predisposition to unconditionally reward (or punish) one’s interaction partner’s cooperation (or defection)—and altruism—a predisposition to increase one’s own utility by elevating an interaction partner’s utility. Our study demonstrates how strong reciprocity and altruism can mitigate the free-rider problem in the feedback system to create reputational incentives for mutually beneficial online trade.

Effect of electromagnetic fields on highly diluted remedies measured by ultraviolet spectroscopy

Purpose: In homeopathy or anthroposophically extended medicine high dilutions are used. They showed significant differences in ultraviolet light (UV) transmission between controls and different dilution levels. Exposing such dilutions to physical factors such as UV light or elevated temperature (37�C) yielded significantly different UV transmissions values compared to unexposed dilutions. The aim was to test whether electromagnetic fields (EMF) of a mobile phone affect the UV absorbance of dilutions of Atropa belladonna (Ab) and quartz. Methods: Commercially available dilutions of Ab 4x, 6x, 12x, 15x, 30x and of quartz 6x, 12x, 15x, 30x were investigated. On 5 days, 4 samples of each dilution were exposed to the EMF by a mobile phone at 900MHz (GSM) with an output power of 2W for 3 h. Control samples were kept in a separate room. UV-absorbance of the samples in the range from 190 to 340 nm was measured in randomized order. The average absorbance from 200 to 340 nm and from 200 to 240 nm was compared between exposed and unexposed samples by a dependent t-test. Results: Between unexposed and exposed dilutions of Ab and quartz no significant differences were detected, except for quartz 12x over the range from 200 to 340 nm. Conclusion: Exposure of high dilutions of Ab and quartz to GSM EMF of a mobile phone did not alter UV absorbance of these dilutions.

Towards End-User Driven Power Saving Control in Android devices

Abstract. During the last decade mobile communications increasingly became part of people's daily routine. Such usage raises new challenges regarding devices' battery lifetime management when using most popular wireless access technologies, such as IEEE 802.11. This paper investigates the energy/delay trade-off of using an end-user driven power saving approach, when compared with the standard IEEE 802.11 power saving algorithms. The assessment was conducted in a real testbed using an Android mobile phone and high-precision energy measurement hardware. The results show clear energy benefits of employing user-driven power saving techniques, when compared with other standard approaches.